From: Alex Shi <alex.shi@intel.com>
To: tglx@linutronix.de, mingo@redhat.com, hpa@zytor.com,
arnd@arndb.de, rostedt@goodmis.org, fweisbec@gmail.com
Cc: jeremy@goop.org, riel@redhat.com, luto@mit.edu,
alex.shi@intel.com, avi@redhat.com, len.brown@intel.com,
dhowells@redhat.com, fenghua.yu@intel.com,
borislav.petkov@amd.com, yinghai@kernel.org, ak@linux.intel.com,
cpw@sgi.com, steiner@sgi.com, akpm@linux-foundation.org,
penberg@kernel.org, a.p.zijlstra@chello.nl, hughd@google.com,
kamezawa.hiroyu@jp.fujitsu.com, viro@zeniv.linux.org.uk,
linux-kernel@vger.kernel.org, yongjie.ren@intel.com
Subject: [PATCH v6 6/7] x86/tlb: enable tlb flush range support for generic mmu on x86
Date: Thu, 17 May 2012 13:42:54 +0800 [thread overview]
Message-ID: <1337233375-840-7-git-send-email-alex.shi@intel.com> (raw)
In-Reply-To: <1337233375-840-1-git-send-email-alex.shi@intel.com>
Not every tlb_flush execution moment is really need to evacuate all
TLB entries, like in munmap, just few 'invlpg' is better for whole
process performance, since it leaves most of TLB entries for later
accessing.
All of tlb interfaces in mm/memory.c are reused by all architectures
except few of them for generic mmu_gather were protected under
HAVE_GENERIC_MMU_GATHER. So, for x86, just re-implement 'tlb_flush'
is enough.
This patch also rewrite flush_tlb_range for 2 purposes:
1, split it out to get flush_blt_mm_range function.
2, clean up to reduce line breaking, thanks for Borislav's input.
Thanks for Peter Zijlstra time and time reminder for multiple
architecture code safe!
Signed-off-by: Alex Shi <alex.shi@intel.com>
---
arch/x86/include/asm/tlb.h | 9 +++-
arch/x86/include/asm/tlbflush.h | 9 +++
arch/x86/mm/tlb.c | 117 ++++++++++++++++++---------------------
include/asm-generic/tlb.h | 2 +
mm/memory.c | 9 +++
5 files changed, 81 insertions(+), 65 deletions(-)
diff --git a/arch/x86/include/asm/tlb.h b/arch/x86/include/asm/tlb.h
index 829215f..4fef207 100644
--- a/arch/x86/include/asm/tlb.h
+++ b/arch/x86/include/asm/tlb.h
@@ -4,7 +4,14 @@
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#define tlb_flush(tlb) \
+{ \
+ if (tlb->fullmm == 0) \
+ flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end, 0UL); \
+ else \
+ flush_tlb_mm_range(tlb->mm, 0UL, TLB_FLUSH_ALL, 0UL); \
+}
#include <asm-generic/tlb.h>
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index c39c94e..1562ed0 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -105,6 +105,13 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
__flush_tlb();
}
+static inline void flush_tlb_mm_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end, unsigned long vmflag)
+{
+ if (mm == current->active_mm)
+ __flush_tlb();
+}
+
static inline void native_flush_tlb_others(const struct cpumask *cpumask,
struct mm_struct *mm,
unsigned long start,
@@ -128,6 +135,8 @@ extern void flush_tlb_mm(struct mm_struct *);
extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
extern void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
+extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
+ unsigned long end, unsigned long vmflag);
#define flush_tlb() flush_tlb_current_task()
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index aef0621..87c68e0 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -298,23 +298,6 @@ void flush_tlb_current_task(void)
preempt_enable();
}
-void flush_tlb_mm(struct mm_struct *mm)
-{
- preempt_disable();
-
- if (current->active_mm == mm) {
- if (current->mm)
- local_flush_tlb();
- else
- leave_mm(smp_processor_id());
- }
- if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
-
- preempt_enable();
-}
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
static inline int has_large_page(struct mm_struct *mm,
unsigned long start, unsigned long end)
{
@@ -336,67 +319,73 @@ static inline int has_large_page(struct mm_struct *mm,
}
return 0;
}
-#else
-static inline int has_large_page(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- return 0;
-}
-#endif
-void flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- struct mm_struct *mm;
- if (vma->vm_flags & VM_HUGETLB || tlb_flushall_shift == -1 ) {
-flush_all:
- flush_tlb_mm(vma->vm_mm);
- return;
- }
+void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
+ unsigned long end, unsigned long vmflag)
+{
+ unsigned long addr;
+ unsigned act_entries, tlb_entries = 0;
preempt_disable();
- mm = vma->vm_mm;
- if (current->active_mm == mm) {
- if (current->mm) {
- unsigned long addr, vmflag = vma->vm_flags;
- unsigned act_entries, tlb_entries = 0;
+ if (current->active_mm != mm)
+ goto flush_all;
- if (vmflag & VM_EXEC)
- tlb_entries = tlb_lli_4k[ENTRIES];
- else
- tlb_entries = tlb_lld_4k[ENTRIES];
+ if (!current->mm) {
+ leave_mm(smp_processor_id());
+ goto flush_all;
+ }
- act_entries = tlb_entries > mm->total_vm ?
- mm->total_vm : tlb_entries;
+ if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1) {
+ local_flush_tlb();
+ goto flush_all;
+ }
- if ((end - start) >> PAGE_SHIFT >
- act_entries >> tlb_flushall_shift)
- local_flush_tlb();
- else {
- if (has_large_page(mm, start, end)) {
- preempt_enable();
- goto flush_all;
- }
- for (addr = start; addr <= end;
- addr += PAGE_SIZE)
- __flush_tlb_single(addr);
+ if (vmflag & VM_EXEC)
+ tlb_entries = tlb_lli_4k[ENTRIES];
+ else
+ tlb_entries = tlb_lld_4k[ENTRIES];
+ act_entries = mm->total_vm > tlb_entries ? tlb_entries : mm->total_vm;
- if (cpumask_any_but(mm_cpumask(mm),
- smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(mm_cpumask(mm), mm,
- start, end);
- preempt_enable();
- return;
- }
- } else {
- leave_mm(smp_processor_id());
+ if ((end - start) >> PAGE_SHIFT > act_entries >> tlb_flushall_shift)
+ local_flush_tlb();
+ else {
+ if (has_large_page(mm, start, end)) {
+ local_flush_tlb();
+ goto flush_all;
}
+ for (addr = start; addr <= end; addr += PAGE_SIZE)
+ __flush_tlb_single(addr);
+
+ if (cpumask_any_but(mm_cpumask(mm),
+ smp_processor_id()) < nr_cpu_ids)
+ flush_tlb_others(mm_cpumask(mm), mm, start, end);
+ preempt_enable();
+ return;
}
+
+flush_all:
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
preempt_enable();
}
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ unsigned long vmflag = vma->vm_flags;
+
+ if (!cpu_has_invlpg || vma->vm_flags & VM_HUGETLB)
+ flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL);
+ else
+ flush_tlb_mm_range(mm, start, end, vmflag);
+}
+
void flush_tlb_page(struct vm_area_struct *vma, unsigned long start)
{
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index 75e888b..ed6642a 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -86,6 +86,8 @@ struct mmu_gather {
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch *batch;
#endif
+ unsigned long start;
+ unsigned long end;
unsigned int need_flush : 1, /* Did free PTEs */
fast_mode : 1; /* No batching */
diff --git a/mm/memory.c b/mm/memory.c
index 6105f47..a1078af 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -206,6 +206,8 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm)
tlb->mm = mm;
tlb->fullmm = fullmm;
+ tlb->start = -1UL;
+ tlb->end = 0;
tlb->need_flush = 0;
tlb->fast_mode = (num_possible_cpus() == 1);
tlb->local.next = NULL;
@@ -248,6 +250,8 @@ void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long e
{
struct mmu_gather_batch *batch, *next;
+ tlb->start = start;
+ tlb->end = end;
tlb_flush_mmu(tlb);
/* keep the page table cache within bounds */
@@ -1204,6 +1208,11 @@ again:
*/
if (force_flush) {
force_flush = 0;
+
+#ifdef HAVE_GENERIC_MMU_GATHER
+ tlb->start = addr;
+ tlb->end = end;
+#endif
tlb_flush_mmu(tlb);
if (addr != end)
goto again;
--
1.7.5.4
next prev parent reply other threads:[~2012-05-17 5:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-17 5:42 [PATCH v6 0/7] tlb flush optimization " Alex Shi
2012-05-17 5:42 ` [PATCH v6 1/7] x86/tlb: unify TLB_FLUSH_ALL definition Alex Shi
2012-05-17 5:42 ` [PATCH v6 2/7] x86/tlb_info: get last level TLB entry number of CPU Alex Shi
2012-05-17 5:42 ` [PATCH v6 3/7] x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range Alex Shi
2012-05-17 5:42 ` [PATCH v6 4/7] x86/tlb: fall back to flush all when meet a THP large page Alex Shi
2012-05-17 5:42 ` [PATCH v6 5/7] x86/tlb: add tlb_flushall_shift for specific CPU Alex Shi
2012-05-17 5:42 ` Alex Shi [this message]
2012-05-17 5:42 ` [PATCH v6 7/7] x86/tlb: add tlb_flushall_shift knob into debugfs Alex Shi
2012-05-17 8:40 ` [PATCH v6 0/7] tlb flush optimization on x86 Alex Shi
2012-05-17 8:49 ` Alex Shi
2012-05-18 0:16 ` Alex Shi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337233375-840-7-git-send-email-alex.shi@intel.com \
--to=alex.shi@intel.com \
--cc=a.p.zijlstra@chello.nl \
--cc=ak@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=avi@redhat.com \
--cc=borislav.petkov@amd.com \
--cc=cpw@sgi.com \
--cc=dhowells@redhat.com \
--cc=fenghua.yu@intel.com \
--cc=fweisbec@gmail.com \
--cc=hpa@zytor.com \
--cc=hughd@google.com \
--cc=jeremy@goop.org \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@mit.edu \
--cc=mingo@redhat.com \
--cc=penberg@kernel.org \
--cc=riel@redhat.com \
--cc=rostedt@goodmis.org \
--cc=steiner@sgi.com \
--cc=tglx@linutronix.de \
--cc=viro@zeniv.linux.org.uk \
--cc=yinghai@kernel.org \
--cc=yongjie.ren@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome