From: Lin Ming <ming.m.lin@intel.com>
To: Jens Axboe <axboe@kernel.dk>, Alan Stern <stern@rowland.harvard.edu>
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-scsi@vger.kernel.org
Subject: [RFC PATCH v3 4/4] [SCSI] sd: change to auto suspend mode
Date: Tue, 22 May 2012 15:21:32 +0800 [thread overview]
Message-ID: <1337671292-15583-5-git-send-email-ming.m.lin@intel.com> (raw)
In-Reply-To: <1337671292-15583-1-git-send-email-ming.m.lin@intel.com>
Uses block layer runtime pm helper functions in scsi_runtime_suspend/resume.
Remove scsi_autopm_* from sd open/release/remove path.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
---
drivers/scsi/scsi_pm.c | 27 ++++++++++++++++++++-------
drivers/scsi/scsi_sysfs.c | 2 ++
drivers/scsi/sd.c | 10 +---------
3 files changed, 23 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index c467064..302a157 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -139,10 +139,16 @@ static int scsi_runtime_suspend(struct device *dev)
dev_dbg(dev, "scsi_runtime_suspend\n");
if (scsi_is_sdev_device(dev)) {
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct request_queue *q = sdev->request_queue;
+
+ err = blk_pre_runtime_suspend(q);
+ if (err)
+ return err;
+
err = scsi_dev_type_suspend(dev, PMSG_AUTO_SUSPEND);
- if (err == -EAGAIN)
- pm_schedule_suspend(dev, jiffies_to_msecs(
- round_jiffies_up_relative(HZ/10)));
+
+ blk_post_runtime_suspend(q, err);
}
/* Insert hooks here for targets, hosts, and transport classes */
@@ -155,8 +161,14 @@ static int scsi_runtime_resume(struct device *dev)
int err = 0;
dev_dbg(dev, "scsi_runtime_resume\n");
- if (scsi_is_sdev_device(dev))
+ if (scsi_is_sdev_device(dev)) {
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct request_queue *q = sdev->request_queue;
+
+ blk_pre_runtime_resume(q);
err = scsi_dev_type_resume(dev);
+ blk_post_runtime_resume(q, err);
+ }
/* Insert hooks here for targets, hosts, and transport classes */
@@ -171,9 +183,10 @@ static int scsi_runtime_idle(struct device *dev)
/* Insert hooks here for targets, hosts, and transport classes */
- if (scsi_is_sdev_device(dev))
- err = pm_schedule_suspend(dev, 100);
- else
+ if (scsi_is_sdev_device(dev)) {
+ pm_runtime_mark_last_busy(dev);
+ err = pm_request_autosuspend(dev);
+ } else
err = pm_runtime_suspend(dev);
return err;
}
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 04c2a27..1e8975f 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -895,6 +895,8 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
*/
scsi_autopm_get_device(sdev);
+ blk_pm_runtime_init(rq, &sdev->sdev_gendev);
+
error = device_add(&sdev->sdev_gendev);
if (error) {
sdev_printk(KERN_INFO, sdev,
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1205a8b..09e5ffe 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -966,10 +966,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
sdev = sdkp->device;
- retval = scsi_autopm_get_device(sdev);
- if (retval)
- goto error_autopm;
-
/*
* If the device is in error recovery, wait until it is done.
* If the device is offline, then disallow any access to it.
@@ -1014,8 +1010,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
return 0;
error_out:
- scsi_autopm_put_device(sdev);
-error_autopm:
scsi_disk_put(sdkp);
return retval;
}
@@ -1050,7 +1044,6 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
* XXX is followed by a "rmmod sd_mod"?
*/
- scsi_autopm_put_device(sdev);
scsi_disk_put(sdkp);
return 0;
}
@@ -2631,7 +2624,7 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
sdp->removable ? "removable " : "");
- scsi_autopm_put_device(sdp);
+ pm_runtime_put_sync_autosuspend(&sdp->sdev_gendev);
put_device(&sdkp->dev);
}
@@ -2755,7 +2748,6 @@ static int sd_remove(struct device *dev)
struct scsi_disk *sdkp;
sdkp = dev_get_drvdata(dev);
- scsi_autopm_get_device(sdkp->device);
async_synchronize_full();
blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
--
1.7.2.5
next prev parent reply other threads:[~2012-05-22 7:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-22 7:21 [RFC PATCH v3 0/4]: block layer runtime pm Lin Ming
2012-05-22 7:21 ` [RFC PATCH v3 1/4] block: add a flag to identify PM request Lin Ming
2012-05-23 15:02 ` Alan Stern
2012-05-23 15:35 ` Lin Ming
2012-05-22 7:21 ` [RFC PATCH v3 2/4] block: add runtime pm helpers Lin Ming
2012-05-22 7:21 ` [RFC PATCH v3 3/4] block: implement runtime pm strategy Lin Ming
2012-05-22 16:14 ` Alan Stern
2012-05-23 8:23 ` Lin Ming
2012-05-23 14:53 ` Alan Stern
2012-05-22 7:21 ` Lin Ming [this message]
2012-05-23 8:45 ` [RFC PATCH v3 4/4] [SCSI] sd: change to auto suspend mode Lin Ming
2012-05-23 14:43 ` Alan Stern
2012-05-23 16:46 ` Lin Ming
2012-05-22 16:10 ` [RFC PATCH v3 0/4]: block layer runtime pm Alan Stern
2012-05-23 8:29 ` Lin Ming
2012-05-23 15:03 ` Alan Stern
2012-05-23 15:18 ` Lin Ming
2012-05-23 15:27 ` Alan Stern
2012-05-23 15:53 ` Lin Ming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337671292-15583-5-git-send-email-ming.m.lin@intel.com \
--to=ming.m.lin@intel.com \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®