From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934059Ab2FHODQ (ORCPT ); Fri, 8 Jun 2012 10:03:16 -0400 Received: from na3sys009aog102.obsmtp.com ([74.125.149.69]:45054 "EHLO na3sys009aog102.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757708Ab2FHOCj (ORCPT ); Fri, 8 Jun 2012 10:02:39 -0400 From: Peter Ujfalusi To: Russell King , Benoit Cousson , Tony Lindgren , Grant Likely Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-omap@vger.kernel.org, Rajendra Nayak , Liam Girdwood Subject: [PATCH 4/7] arm/dts: omap4-sdp: Add support for twl6040 Date: Fri, 8 Jun 2012 17:02:02 +0300 Message-Id: <1339164125-32534-5-git-send-email-peter.ujfalusi@ti.com> X-Mailer: git-send-email 1.7.8.6 In-Reply-To: <1339164125-32534-1-git-send-email-peter.ujfalusi@ti.com> References: <1339164125-32534-1-git-send-email-peter.ujfalusi@ti.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The twl6040 provides the audio and vibra support on OMAP4 SDP boards. It is connected to i2c1 bus with 0x4b address. Signed-off-by: Peter Ujfalusi --- arch/arm/boot/dts/omap4-sdp.dts | 25 +++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 4b51611..f09d1f5 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -99,6 +99,31 @@ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + + /* regulators for vibra motor */ + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + + vibra { + /* Vibra driver, motor resistance parameters */ + ti,vibldrv-res = <8>; + ti,vibrdrv-res = <3>; + ti,viblmotor-res = <10>; + ti,vibrmotor-res = <10>; + }; + }; }; /include/ "twl6030.dtsi" -- 1.7.8.6