From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932417Ab2FNQwG (ORCPT ); Thu, 14 Jun 2012 12:52:06 -0400 Received: from mail.work-microwave.de ([62.245.205.51]:57645 "EHLO work-microwave.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932385Ab2FNQwD (ORCPT ); Thu, 14 Jun 2012 12:52:03 -0400 From: Roland Stigge To: arm@kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kevin.wells@nxp.com, srinivas.bakki@nxp.com, aletes.xgr@gmail.com Cc: Roland Stigge Subject: [PATCH v2 20/23] ARM: LPC32xx: Cleanup board init, remove duplicate clock init Date: Thu, 14 Jun 2012 18:51:10 +0200 Message-Id: <1339692673-7848-21-git-send-email-stigge@antcom.de> X-Mailer: git-send-email 1.7.10 In-Reply-To: <1339692673-7848-1-git-send-email-stigge@antcom.de> References: <1339692673-7848-1-git-send-email-stigge@antcom.de> X-FEAS-SYSTEM-WL: rst@work-microwave.de, 192.168.11.78 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Alexandre Pereira da Silva Remove SSP0, CLCD and DMA clocks that are already migrated to the clock framework. Signed-off-by: Alexandre Pereira da Silva Signed-off-by: Roland Stigge --- arch/arm/mach-lpc32xx/phy3250.c | 17 ----------------- 1 file changed, 17 deletions(-) --- linux-2.6.orig/arch/arm/mach-lpc32xx/phy3250.c +++ linux-2.6/arch/arm/mach-lpc32xx/phy3250.c @@ -272,28 +272,11 @@ static void __init lpc3250_machine_init( lpc32xx_serial_init(); - /* - * AMBA peripheral clocks need to be enabled prior to AMBA device - * detection or a data fault will occur, so enable the clocks - * here. - */ tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN | LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN; __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN), - LPC32XX_CLKPWR_LCDCLK_CTRL); - - tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN), - LPC32XX_CLKPWR_SSP_CLK_CTRL); - - tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL); - __raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN), - LPC32XX_CLKPWR_DMA_CLK_CTRL); - /* Test clock needed for UDA1380 initial init */ __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC | LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,