From: Kelvin Cheung <keguang.zhang@gmail.com>
To: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
ralf@linux-mips.org
Cc: wuzhangjin@gmail.com, zhzhl555@gmail.com,
Kelvin Cheung <keguang.zhang@gmail.com>
Subject: [PATCH V7 1/4] MIPS: Add CPU support for Loongson1B
Date: Fri, 15 Jun 2012 18:53:34 +0800 [thread overview]
Message-ID: <1339757617-2187-2-git-send-email-keguang.zhang@gmail.com> (raw)
In-Reply-To: <1339757617-2187-1-git-send-email-keguang.zhang@gmail.com>
This patch adds CPU support for Loongson1B.
Loongson 1B is a 32-bit SoC designed by Institute of
Computing Technology (ICT), Chinese Academy of Sciences (CAS),
which implements the MIPS32 release 2 instruction set.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
---
arch/mips/include/asm/cpu.h | 3 ++-
arch/mips/include/asm/module.h | 2 ++
arch/mips/kernel/cpu-probe.c | 15 +++++++++++++++
arch/mips/kernel/perf_event_mipsxx.c | 5 +++++
arch/mips/kernel/traps.c | 1 +
arch/mips/oprofile/common.c | 1 +
arch/mips/oprofile/op_model_mipsxx.c | 4 ++++
7 files changed, 30 insertions(+), 1 deletions(-)
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 95e40c1..d9a6b84 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -199,6 +199,7 @@
#define PRID_REV_34K_V1_0_2 0x0022
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
+#define PRID_REV_LOONGSON1B 0x0020
/*
* Older processors used to encode processor version and revision in two
@@ -261,7 +262,7 @@ enum cpu_type_enum {
*/
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
- CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC,
+ CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC, CPU_LOONGSON1,
/*
* MIPS64 class processors
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 5300080..30db31b 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -119,6 +119,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "SB1 "
#elif defined CONFIG_CPU_LOONGSON2
#define MODULE_PROC_FAMILY "LOONGSON2 "
+#elif defined CONFIG_CPU_LOONGSON1
+#define MODULE_PROC_FAMILY "LOONGSON1 "
#elif defined CONFIG_CPU_CAVIUM_OCTEON
#define MODULE_PROC_FAMILY "OCTEON "
#elif defined CONFIG_CPU_XLR
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index f4630e1..0a281c6 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -37,6 +37,8 @@
void (*cpu_wait)(void);
EXPORT_SYMBOL(cpu_wait);
+static void __cpuinit decode_configs(struct cpuinfo_mips *c);
+
static void r3081_wait(void)
{
unsigned long cfg = read_c0_conf();
@@ -192,6 +194,7 @@ void __init check_wait(void)
case CPU_JZRISC:
case CPU_XLR:
case CPU_XLP:
+ case CPU_LOONGSON1:
cpu_wait = r4k_wait;
break;
@@ -638,6 +641,18 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
MIPS_CPU_32FPR;
c->tlbsize = 64;
break;
+ case PRID_IMP_LOONGSON1:
+ decode_configs(c);
+
+ c->cputype = CPU_LOONGSON1;
+
+ switch (c->processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+ __cpu_name[cpu] = "Loongson 1B";
+ break;
+ }
+
+ break;
}
}
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index eb5e394..2f28d3b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1559,6 +1559,11 @@ init_hw_perf_events(void)
mipspmu.general_event_map = &mipsxxcore_event_map;
mipspmu.cache_event_map = &mipsxxcore_cache_map;
break;
+ case CPU_LOONGSON1:
+ mipspmu.name = "mips/loongson1";
+ mipspmu.general_event_map = &mipsxxcore_event_map;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map;
+ break;
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index c3c2935..9be3df1 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1253,6 +1253,7 @@ static inline void parity_protection_init(void)
case CPU_5KC:
case CPU_5KE:
+ case CPU_LOONGSON1:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* Set the PE bit (bit 31) in the c0_errctl register. */
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index b6e3782..65420c8 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -90,6 +90,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
+ case CPU_LOONGSON1:
lmodel = &op_model_mipsxx_ops;
break;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 52da646..28ea1a4 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -368,6 +368,10 @@ static int __init mipsxx_init(void)
op_model_mipsxx_ops.cpu_type = "mips/sb1";
break;
+ case CPU_LOONGSON1:
+ op_model_mipsxx_ops.cpu_type = "mips/loongson1";
+ break;
+
default:
printk(KERN_ERR "Profiling unsupported for this CPU\n");
--
1.7.1
next prev parent reply other threads:[~2012-06-15 10:54 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-15 10:53 [PATCH V7 0/4] MIPS: Add " Kelvin Cheung
2012-06-15 10:53 ` Kelvin Cheung [this message]
2012-06-20 19:13 ` [PATCH V7 1/4] MIPS: Add CPU " Ralf Baechle
2012-06-15 10:53 ` [PATCH V7 2/4] MIPS: Add board " Kelvin Cheung
2012-06-20 19:25 ` Ralf Baechle
2012-06-20 19:35 ` Sergei Shtylyov
2012-06-20 20:10 ` Florian Fainelli
2012-06-21 11:32 ` Ralf Baechle
[not found] ` <CAJhJPsV2D3xVbA93OpaB8mN6Vs64EmWjxhCbpCMBA5r+wx8mnQ@mail.gmail.com>
2012-06-21 8:18 ` Florian Fainelli
2012-06-15 10:53 ` [PATCH V7 3/4] MIPS: Add Makefile and Kconfig " Kelvin Cheung
2012-06-15 10:53 ` [PATCH V7 4/4] MIPS: Add defconfig " Kelvin Cheung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339757617-2187-2-git-send-email-keguang.zhang@gmail.com \
--to=keguang.zhang@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=wuzhangjin@gmail.com \
--cc=zhzhl555@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®