From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932822Ab2FVMLQ (ORCPT ); Fri, 22 Jun 2012 08:11:16 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:37068 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932714Ab2FVMLM (ORCPT ); Fri, 22 Jun 2012 08:11:12 -0400 From: Kishon Vijay Abraham I To: , , , , , Subject: [PATCH v3 0/5] usb: musb: cleanup Date: Fri, 22 Jun 2012 17:40:50 +0530 Message-ID: <1340367055-19835-1-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.5.4 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Most part of this patch series was obtained by splitting [RFC PATCH 2/3] usb: musb: omap glue: use omap-usb2 as the phy driver. TO DO: * dt adaptation of musb omap glue, twl4030, twl6030. * Use control module driver API to write to control module registers (mailbox and power control of phy) * send usb2 phy driver * make musb omap glue use usb2 phy driver and make twl630 as a comparator driver. Changes from v2: * Added a condition in twl4030 to avoid spurious disconnect event message to the omap glue, on bootup if the cable is not connected. Changes from v1: Changed the commit log of *usb: musb: move work_struct(otg_notifier_work) from core to omap glue* as per Sergei's suggestion. Patch series depends on [PATCH v7 0/3] usb: multi-phy support Developed and Tested on. git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git musb commit 2ed9127cff9a255b7671b8d3d938109f68a87961 Author: Mantesh Sarasetti Date: Fri Jun 1 14:54:30 2012 +0300 usb: musb: host: Disable MUSB DMA mode incase of DMA channel request failure Performed device mode testing in omap4 panda and omap3 beagle. Kishon Vijay Abraham I (5): usb: musb: move work_struct(otg_notifier_work) from core to omap glue usb: musb: twl: use mailbox API to send VBUS or ID events drivers: usb: musb: move otg specific initializations from twl to glue usb: musb: omap: use devres API to allocate resources drivers: usb: otg: twl: use devres API to allocate resources drivers/usb/musb/musb_core.h | 2 - drivers/usb/musb/omap2430.c | 122 +++++++++++++++++++++++++--------------- drivers/usb/otg/twl4030-usb.c | 67 ++++++++-------------- drivers/usb/otg/twl6030-usb.c | 69 ++++++++--------------- include/linux/usb/musb-omap.h | 30 ++++++++++ 5 files changed, 155 insertions(+), 135 deletions(-) create mode 100644 include/linux/usb/musb-omap.h -- 1.7.5.4