From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753772Ab2GDOX7 (ORCPT ); Wed, 4 Jul 2012 10:23:59 -0400 Received: from mx.scalarmail.ca ([98.158.95.75]:20191 "EHLO ironport-01.sms.scalar.ca" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753410Ab2GDOX1 (ORCPT ); Wed, 4 Jul 2012 10:23:27 -0400 From: Nick Bowler To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 0/3] Zynq ZC702 bringup Date: Wed, 4 Jul 2012 10:13:32 -0400 Message-Id: <1341411215-3617-1-git-send-email-nbowler@elliptictech.com> X-Mailer: git-send-email 1.7.8.6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This short series allows use of the UART on the Zynq ZC702 for early printk, and then fixes some problems that occur during early boot. While a lot of things are still not working with this board, these changes in addition to the GIC OF initialization patch posted last month allow me to bring the system up to a busybox shell. Nick Bowler (3): ARM: zynq: Allow UART1 to be used as DEBUG_LL console. ARM: zynq: Add compatible entry for the ZC702 board. ARM: zynq: Map DEBUG_LL UARTs in vmalloc space. arch/arm/Kconfig.debug | 17 +++++++++++++++++ arch/arm/mach-zynq/common.c | 5 +++-- arch/arm/mach-zynq/include/mach/zynq_soc.h | 17 ++++++++++++----- 3 files changed, 32 insertions(+), 7 deletions(-) -- 1.7.8.6