From: "Theodore Ts'o" <tytso@mit.edu>
To: Linux Kernel Developers List <linux-kernel@vger.kernel.org>
Cc: torvalds@linux-foundation.org, w@1wt.eu, ewust@umich.edu,
zakir@umich.edu, greg@kroah.com, mpm@selenic.com,
nadiah@cs.ucsd.edu, jhalderm@umich.edu, tglx@linutronix.de,
davem@davemloft.net, "Theodore Ts'o" <tytso@mit.edu>,
stable@kernel.org
Subject: [PATCH 01/10] random: make 'add_interrupt_randomness()' do something sane
Date: Thu, 5 Jul 2012 14:12:04 -0400 [thread overview]
Message-ID: <1341511933-11169-2-git-send-email-tytso@mit.edu> (raw)
In-Reply-To: <1341511933-11169-1-git-send-email-tytso@mit.edu>
We've been moving away from add_interrupt_randomness() for various
reasons: it's too expensive to do on every interrupt, and flooding the
CPU with interrupts could theoretically cause bogus floods of entropy
from a somewhat externally controllable source.
This solves both problems by limiting the actual randomness addition
to just once a second or after 128 interrupts, whicever comes first.
During that time, the interrupt cycle data is buffered up in a per-cpu
pool. Also, we make sure the the nonblocking pool used by urandom is
initialized before we start feeding the normal input pool. This
assures that /dev/urandom is returning unpredictable data as soon as
possible.
(Based on an original patch by Linus, but significantly modified by
tytso.)
Tested-by: Eric Wustrow <ewust@umich.edu>
Reported-by: Eric Wustrow <ewust@umich.edu>
Reported-by: Nadia Heninger <nadiah@cs.ucsd.edu>
Reported-by: Zakir Durumeric <zakir@umich.edu>
Reported-by: J. Alex Halderman <jhalderm@umich.edu>.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
---
drivers/char/random.c | 85 ++++++++++++++++++++++++++++++++++++++---------
drivers/mfd/ab3100-core.c | 2 --
kernel/irq/handle.c | 3 +-
3 files changed, 71 insertions(+), 19 deletions(-)
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 4ec04a7..53b3e85 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -133,13 +133,9 @@
* add_input_randomness() uses the input layer interrupt timing, as well as
* the event type information from the hardware.
*
- * add_interrupt_randomness() uses the inter-interrupt timing as random
- * inputs to the entropy pool. Note that not all interrupts are good
- * sources of randomness! For example, the timer interrupts is not a
- * good choice, because the periodicity of the interrupts is too
- * regular, and hence predictable to an attacker. Network Interface
- * Controller interrupts are a better measure, since the timing of the
- * NIC interrupts are more unpredictable.
+ * add_interrupt_randomness() uses the interrupt timing as random
+ * inputs to the entropy pool. Using the cycle counters and the irq source
+ * as inputs, it feeds the randomness roughly once a second.
*
* add_disk_randomness() uses what amounts to the seek time of block
* layer request events, on a per-disk_devt basis, as input to the
@@ -256,6 +252,8 @@
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/ptrace.h>
#include <asm/io.h>
/*
@@ -421,7 +419,9 @@ struct entropy_store {
spinlock_t lock;
unsigned add_ptr;
int entropy_count;
+ int entropy_total;
int input_rotate;
+ unsigned int initialized:1;
__u8 last_data[EXTRACT_SIZE];
};
@@ -454,6 +454,10 @@ static struct entropy_store nonblocking_pool = {
.pool = nonblocking_pool_data
};
+static __u32 const twist_table[8] = {
+ 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158,
+ 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 };
+
/*
* This function adds bytes into the entropy "pool". It does not
* update the entropy estimate. The caller should call
@@ -467,9 +471,6 @@ static struct entropy_store nonblocking_pool = {
static void mix_pool_bytes_extract(struct entropy_store *r, const void *in,
int nbytes, __u8 out[64])
{
- static __u32 const twist_table[8] = {
- 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158,
- 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 };
unsigned long i, j, tap1, tap2, tap3, tap4, tap5;
int input_rotate;
int wordmask = r->poolinfo->poolwords - 1;
@@ -528,6 +529,35 @@ static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes)
mix_pool_bytes_extract(r, in, bytes, NULL);
}
+struct fast_pool {
+ __u32 pool[4];
+ unsigned long last;
+ unsigned short count;
+ unsigned short rotate;
+};
+
+/*
+ * This is a fast mixing routine used by the interrupt randomness
+ * collector. It's hardcoded for an 128 bit pool and assumes that any
+ * locks that might be needed are taken by the caller.
+ */
+static void fast_mix(struct fast_pool *f, const void *in, int nbytes)
+{
+ const char *bytes = in;
+ __u32 w;
+ unsigned i = f->count;
+ unsigned input_rotate = f->rotate;
+
+ while (nbytes--) {
+ w = rol32(*bytes++, input_rotate & 31) ^ f->pool[i & 3] ^
+ f->pool[(i + 1) & 3];
+ f->pool[i & 3] = (w >> 3) ^ twist_table[w & 7];
+ input_rotate += (i++ & 3) ? 7 : 14;
+ }
+ f->count = i;
+ f->rotate = input_rotate;
+}
+
/*
* Credit (or debit) the entropy store with n bits of entropy
*/
@@ -551,6 +581,12 @@ static void credit_entropy_bits(struct entropy_store *r, int nbits)
entropy_count = r->poolinfo->POOLBITS;
r->entropy_count = entropy_count;
+ if (!r->initialized && nbits > 0) {
+ r->entropy_total += nbits;
+ if (r->entropy_total > 128)
+ r->initialized = 1;
+ }
+
/* should we wake readers? */
if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) {
wake_up_interruptible(&random_read_wait);
@@ -700,17 +736,35 @@ void add_input_randomness(unsigned int type, unsigned int code,
}
EXPORT_SYMBOL_GPL(add_input_randomness);
+static DEFINE_PER_CPU(struct fast_pool, irq_randomness);
+
void add_interrupt_randomness(int irq)
{
- struct timer_rand_state *state;
+ struct entropy_store *r;
+ struct fast_pool *fast_pool = &__get_cpu_var(irq_randomness);
+ struct pt_regs *regs = get_irq_regs();
+ unsigned long now = jiffies;
+ __u32 input[4];
+
+ input[0] = get_cycles() ^ jiffies;
+ input[1] = irq;
+ if (regs) {
+ __u64 ip = instruction_pointer(regs);
+ input[2] = ip;
+ input[3] = ip >> 32;
+ }
- state = get_timer_rand_state(irq);
+ fast_mix(fast_pool, input, sizeof(input));
- if (state == NULL)
+ if ((fast_pool->count & 255) &&
+ !time_after(now, fast_pool->last + HZ))
return;
- DEBUG_ENT("irq event %d\n", irq);
- add_timer_randomness(state, 0x100 + irq);
+ fast_pool->last = now;
+
+ r = nonblocking_pool.initialized ? &input_pool : &nonblocking_pool;
+ mix_pool_bytes(r, &fast_pool->pool, sizeof(fast_pool->pool));
+ credit_entropy_bits(r, 1);
}
#ifdef CONFIG_BLOCK
@@ -971,6 +1025,7 @@ static void init_std_data(struct entropy_store *r)
spin_lock_irqsave(&r->lock, flags);
r->entropy_count = 0;
+ r->entropy_total = 0;
spin_unlock_irqrestore(&r->lock, flags);
now = ktime_get_real();
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 1efad20..9522d6b 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -409,8 +409,6 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data)
u32 fatevent;
int err;
- add_interrupt_randomness(irq);
-
err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
event_regs, 3);
if (err)
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index bdb1803..8270db0 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -172,8 +172,7 @@ handle_irq_event_percpu(struct irq_desc *desc, struct irqaction *action)
action = action->next;
} while (action);
- if (random & IRQF_SAMPLE_RANDOM)
- add_interrupt_randomness(irq);
+ add_interrupt_randomness(irq);
if (!noirqdebug)
note_interrupt(irq, desc, retval);
--
1.7.11.1.108.gb129051
next prev parent reply other threads:[~2012-07-05 18:13 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 18:12 [PATCH 00/10] /dev/random fixups Theodore Ts'o
2012-07-05 18:12 ` Theodore Ts'o [this message]
2012-07-05 18:47 ` [PATCH 01/10] random: make 'add_interrupt_randomness()' do something sane Matt Mackall
2012-07-05 18:52 ` Linus Torvalds
2012-07-05 21:39 ` Matt Mackall
2012-07-05 21:47 ` Linus Torvalds
2012-07-05 22:00 ` Theodore Ts'o
2012-07-05 22:21 ` Linus Torvalds
2012-07-05 22:31 ` Matt Mackall
2012-07-05 22:35 ` Linus Torvalds
2012-07-05 23:21 ` Theodore Ts'o
2012-07-06 2:59 ` Linus Torvalds
2012-07-06 13:01 ` Theodore Ts'o
2012-07-06 16:24 ` Linus Torvalds
2012-07-06 16:52 ` Theodore Ts'o
2012-07-09 19:15 ` Matt Mackall
2012-07-25 18:43 ` Thomas Gleixner
[not found] ` <CAGsuqq2MWuFnY7PMb_2ddBNNJr80xB_JW+Wryq3mhhmQuEojpg@mail.gmail.com>
2012-07-06 21:59 ` Theodore Ts'o
2012-07-05 18:12 ` [PATCH 02/10] random: use lockless techniques when mixing entropy pools Theodore Ts'o
2012-07-05 18:18 ` Linus Torvalds
2012-07-05 18:19 ` Greg KH
2012-07-05 23:09 ` Theodore Ts'o
2012-07-05 19:10 ` Matt Mackall
2012-07-05 19:47 ` Theodore Ts'o
2012-07-05 20:45 ` Matt Mackall
2012-07-05 18:12 ` [PATCH 03/10] random: create add_device_randomness() interface Theodore Ts'o
2012-07-05 18:12 ` [PATCH 04/10] usb: feed USB device information to the /dev/random driver Theodore Ts'o
2012-07-05 18:12 ` [PATCH 05/10] net: feed /dev/random with the MAC address when registering a device Theodore Ts'o
2012-07-05 18:12 ` [PATCH 06/10] random: use the arch-specific rng in xfer_secondary_pool Theodore Ts'o
2012-07-05 18:49 ` Linus Torvalds
2012-07-05 18:12 ` [PATCH 07/10] random: add new get_random_bytes_arch() function Theodore Ts'o
2012-07-05 18:35 ` Linus Torvalds
2012-07-05 19:50 ` Theodore Ts'o
2012-07-05 21:45 ` Matt Mackall
2012-07-25 3:37 ` H. Peter Anvin
2012-07-25 7:22 ` Ingo Molnar
2012-07-25 15:10 ` Theodore Ts'o
2012-07-25 15:19 ` H. Peter Anvin
2012-07-25 17:37 ` [PATCH] random: mix in architectural randomness in extract_buf() H. Peter Anvin
2012-07-25 23:50 ` Ben Hutchings
2012-07-26 0:32 ` H. Peter Anvin
2012-07-28 2:39 ` Theodore Ts'o
2012-07-28 2:48 ` H. Peter Anvin
2012-07-26 3:16 ` [PATCH 07/10] random: add new get_random_bytes_arch() function H. Peter Anvin
2012-07-26 3:24 ` H. Peter Anvin
2012-07-05 18:12 ` [PATCH 08/10] random: unify mix_pool_bytes() and mix_pool_bytes_entropy() Theodore Ts'o
2012-07-05 18:12 ` [PATCH 09/10] random: add tracepoints for easier debugging and verification Theodore Ts'o
2012-07-05 18:12 ` [PATCH 10/10] MAINTAINERS: Theodore Ts'o is taking over the random driver Theodore Ts'o
2012-07-06 11:40 ` [PATCH 00/10] /dev/random fixups Fengguang Wu
2012-07-06 12:44 ` Theodore Ts'o
2012-07-20 20:15 ` [PATCH] dmi: Feed DMI table to /dev/random driver Tony Luck
2012-07-20 21:03 ` Matt Mackall
2012-07-21 0:56 ` Theodore Ts'o
2012-07-21 1:19 ` Tony Luck
2012-07-21 2:02 ` Theodore Ts'o
2012-07-23 16:47 ` [PATCH] random: Add comment to random_initialize() Tony Luck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341511933-11169-2-git-send-email-tytso@mit.edu \
--to=tytso@mit.edu \
--cc=davem@davemloft.net \
--cc=ewust@umich.edu \
--cc=greg@kroah.com \
--cc=jhalderm@umich.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=mpm@selenic.com \
--cc=nadiah@cs.ucsd.edu \
--cc=stable@kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=w@1wt.eu \
--cc=zakir@umich.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome