From: Vivek Gautam <gautam.vivek@samsung.com>
To: stern@rowland.harvard.edu, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org
Cc: l.majewski@samsung.com, a.kesavan@samsung.com,
prashanth.g@samsung.com, kmpark@infradead.org, joshi@samsung.com,
jg1.han@samsung.com, jy0922.shim@samsung.com,
sshtylyov@mvista.com, olofj@google.com
Subject: [PATCH 1/3 v2] USB: ohci-exynos: Add support for device tree
Date: Thu, 12 Jul 2012 11:25:10 +0530 [thread overview]
Message-ID: <1342072512-29945-2-git-send-email-gautam.vivek@samsung.com> (raw)
In-Reply-To: <1342072512-29945-1-git-send-email-gautam.vivek@samsung.com>
This patch adds support to parse probe data for
ohci driver for exynos using device tree.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 2909621..c4ad60f 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -12,6 +12,7 @@
*/
#include <linux/clk.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <mach/ohci.h>
#include <plat/usb-phy.h>
@@ -71,6 +72,8 @@ static const struct hc_driver exynos_ohci_hc_driver = {
.start_port_reset = ohci_start_port_reset,
};
+static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
+
static int __devinit exynos_ohci_probe(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata;
@@ -87,6 +90,16 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev)
return -EINVAL;
}
+ /*
+ * Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we move to full device tree support this will vanish off.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &ohci_exynos_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
exynos_ohci = kzalloc(sizeof(struct exynos_ohci_hcd), GFP_KERNEL);
if (!exynos_ohci)
return -ENOMEM;
@@ -258,6 +271,14 @@ static const struct dev_pm_ops exynos_ohci_pm_ops = {
.resume = exynos_ohci_resume,
};
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_ohci_match[] = {
+ { .compatible = "samsung,exynos-ohci" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos_ohci_match);
+#endif
+
static struct platform_driver exynos_ohci_driver = {
.probe = exynos_ohci_probe,
.remove = __devexit_p(exynos_ohci_remove),
@@ -266,6 +287,7 @@ static struct platform_driver exynos_ohci_driver = {
.name = "exynos-ohci",
.owner = THIS_MODULE,
.pm = &exynos_ohci_pm_ops,
+ .of_match_table = of_match_ptr(exynos_ohci_match),
}
};
--
1.7.0.4
next prev parent reply other threads:[~2012-07-12 5:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-12 5:55 [PATCH 0/3 v2] USB: host: Add Device tree support for ohci-exynos & ehci-s5p Vivek Gautam
2012-07-12 5:55 ` Vivek Gautam [this message]
2012-07-13 7:04 ` [PATCH 1/3 v2] USB: ohci-exynos: Add support for device tree Jingoo Han
2012-07-12 5:55 ` [PATCH 2/3 v2] USB: ehci-s5p: " Vivek Gautam
2012-07-13 7:03 ` Jingoo Han
2012-07-12 5:55 ` [PATCH 3/3 v2] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer Vivek Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342072512-29945-2-git-send-email-gautam.vivek@samsung.com \
--to=gautam.vivek@samsung.com \
--cc=a.kesavan@samsung.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=jg1.han@samsung.com \
--cc=joshi@samsung.com \
--cc=jy0922.shim@samsung.com \
--cc=kmpark@infradead.org \
--cc=l.majewski@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=olofj@google.com \
--cc=prashanth.g@samsung.com \
--cc=sshtylyov@mvista.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®