From: Seth Forshee <seth.forshee@canonical.com>
To: dri-devel@lists.freedesktop.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org,
Matthew Garrett <mjg59@srcf.ucam.org>,
Andreas Heider <andreas@meetr.de>
Subject: [RFC PATCH 2/5] drm/i915: separate out code to get EDID from LVDS panel
Date: Fri, 3 Aug 2012 11:02:18 -0500 [thread overview]
Message-ID: <1344009741-14248-3-git-send-email-seth.forshee@canonical.com> (raw)
In-Reply-To: <1344009741-14248-1-git-send-email-seth.forshee@canonical.com>
This code will be reused to support hybrid graphics on some Apple
machines that can't get a mode for the LVDS panel at boot, so move it
into a new function named intel_lvds_get_edid().
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
---
drivers/gpu/drm/i915/intel_lvds.c | 95 +++++++++++++++++++++----------------
1 file changed, 55 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index e05c0d3..5069137 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -46,6 +46,7 @@ struct intel_lvds {
struct edid *edid;
+ u8 i2c_pin;
int fitting_mode;
u32 pfit_control;
u32 pfit_pgm_ratios;
@@ -897,6 +898,54 @@ static bool intel_lvds_supported(struct drm_device *dev)
return IS_MOBILE(dev) && !IS_I830(dev);
}
+static bool intel_lvds_get_edid(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_connector *connector = dev_priv->int_lvds_connector;
+ struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
+ struct drm_display_mode *scan; /* *modes, *bios_mode; */
+
+ /*
+ * Attempt to get the fixed panel mode from DDC. Assume that the
+ * preferred mode is the right one.
+ */
+ intel_lvds->edid = drm_get_edid(connector,
+ intel_gmbus_get_adapter(dev_priv,
+ intel_lvds->i2c_pin));
+ if (intel_lvds->edid) {
+ if (drm_add_edid_modes(connector,
+ intel_lvds->edid)) {
+ drm_mode_connector_update_edid_property(connector,
+ intel_lvds->edid);
+ } else {
+ kfree(intel_lvds->edid);
+ intel_lvds->edid = NULL;
+ }
+ }
+ if (!intel_lvds->edid) {
+ /* Didn't get an EDID, so
+ * Set wide sync ranges so we get all modes
+ * handed to valid_mode for checking
+ */
+ connector->display_info.min_vfreq = 0;
+ connector->display_info.max_vfreq = 200;
+ connector->display_info.min_hfreq = 0;
+ connector->display_info.max_hfreq = 200;
+ }
+
+ list_for_each_entry(scan, &connector->probed_modes, head) {
+ if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+ intel_lvds->fixed_mode =
+ drm_mode_duplicate(dev, scan);
+ intel_find_lvds_downclock(dev,
+ intel_lvds->fixed_mode,
+ connector);
+ return true;
+ }
+ }
+ return false;
+}
+
/**
* intel_lvds_init - setup LVDS connectors on this device
* @dev: drm device
@@ -912,7 +961,6 @@ bool intel_lvds_init(struct drm_device *dev)
struct intel_connector *intel_connector;
struct drm_connector *connector;
struct drm_encoder *encoder;
- struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
u32 lvds;
int pipe;
@@ -955,9 +1003,11 @@ bool intel_lvds_init(struct drm_device *dev)
intel_lvds->pfit_control = I915_READ(PFIT_CONTROL);
}
+ intel_lvds->i2c_pin = pin;
intel_encoder = &intel_lvds->base;
encoder = &intel_encoder->base;
connector = &intel_connector->base;
+ dev_priv->int_lvds_connector = connector;
drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
@@ -991,6 +1041,7 @@ bool intel_lvds_init(struct drm_device *dev)
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_ASPECT);
intel_lvds->fitting_mode = DRM_MODE_SCALE_ASPECT;
+
/*
* LVDS discovery:
* 1) check for EDID on DDC
@@ -1001,44 +1052,8 @@ bool intel_lvds_init(struct drm_device *dev)
* if closed, act like it's not there for now
*/
- /*
- * Attempt to get the fixed panel mode from DDC. Assume that the
- * preferred mode is the right one.
- */
- intel_lvds->edid = drm_get_edid(connector,
- intel_gmbus_get_adapter(dev_priv,
- pin));
- if (intel_lvds->edid) {
- if (drm_add_edid_modes(connector,
- intel_lvds->edid)) {
- drm_mode_connector_update_edid_property(connector,
- intel_lvds->edid);
- } else {
- kfree(intel_lvds->edid);
- intel_lvds->edid = NULL;
- }
- }
- if (!intel_lvds->edid) {
- /* Didn't get an EDID, so
- * Set wide sync ranges so we get all modes
- * handed to valid_mode for checking
- */
- connector->display_info.min_vfreq = 0;
- connector->display_info.max_vfreq = 200;
- connector->display_info.min_hfreq = 0;
- connector->display_info.max_hfreq = 200;
- }
-
- list_for_each_entry(scan, &connector->probed_modes, head) {
- if (scan->type & DRM_MODE_TYPE_PREFERRED) {
- intel_lvds->fixed_mode =
- drm_mode_duplicate(dev, scan);
- intel_find_lvds_downclock(dev,
- intel_lvds->fixed_mode,
- connector);
- goto out;
- }
- }
+ if (intel_lvds_get_edid(dev))
+ goto out;
/* Failed to get EDID, what about VBT? */
if (dev_priv->lfp_lvds_vbt_mode) {
@@ -1096,7 +1111,6 @@ out:
dev_priv->lid_notifier.notifier_call = NULL;
}
/* keep the LVDS connector */
- dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
intel_panel_setup_backlight(dev);
@@ -1105,6 +1119,7 @@ out:
failed:
DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
+ dev_priv->int_lvds_connector = NULL;
drm_connector_cleanup(connector);
drm_encoder_cleanup(encoder);
kfree(intel_lvds);
--
1.7.9.5
next prev parent reply other threads:[~2012-08-03 16:02 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-03 16:02 [RFC PATCH 0/5] i915 changes for hybrid graphics support on Macbooks Seth Forshee
2012-08-03 16:02 ` [RFC PATCH 1/5] drm/i915: Add support for vga_switcheroo reprobe Seth Forshee
2012-08-03 16:02 ` Seth Forshee [this message]
2012-08-03 16:02 ` [RFC PATCH 3/5] drm/i915: register LVDS connector even if we can't get a panel mode Seth Forshee
2012-08-03 16:14 ` Matthew Garrett
2012-08-03 16:24 ` Seth Forshee
2012-08-03 16:27 ` Matthew Garrett
2012-08-04 16:57 ` Seth Forshee
2012-08-05 21:14 ` Daniel Vetter
2012-08-05 21:18 ` Matthew Garrett
2012-08-05 21:40 ` Daniel Vetter
2012-08-05 21:44 ` Dave Airlie
2012-08-05 23:20 ` Alex Deucher
2012-08-06 4:51 ` Seth Forshee
2012-08-20 15:30 ` Seth Forshee
2012-08-20 15:30 ` [RFC PATCH 1/7] vga_switcheroo: Add support for switching only the DDC Seth Forshee
2012-08-20 15:30 ` [RFC PATCH 2/7] vga_switcheroo: Add helper function to get the active client Seth Forshee
2012-08-20 15:31 ` [RFC PATCH 3/7] vga_switcheroo: Add notifier call chain for switcheroo events Seth Forshee
2012-08-20 15:31 ` [RFC PATCH 4/7] apple-gmux: Add switch_ddc support Seth Forshee
2012-08-20 15:31 ` [RFC PATCH 5/7] drm/edid: Switch DDC when reading the EDID Seth Forshee
2012-08-20 15:31 ` [RFC PATCH 6/7] drm/pci: Add drm_put_pci_dev() Seth Forshee
2012-08-20 15:31 ` [RFC PATCH 7/7] drm/pci: Defer initialization of secondary graphics devices until switcheroo is ready Seth Forshee
2012-08-20 15:36 ` Matthew Garrett
2012-08-20 15:56 ` Seth Forshee
2012-08-20 15:57 ` Matthew Garrett
2012-08-20 16:24 ` Seth Forshee
2012-08-20 16:28 ` Matthew Garrett
2012-08-10 22:19 ` [RFC PATCH 3/5] drm/i915: register LVDS connector even if we can't get a panel mode Seth Forshee
2012-08-06 12:23 ` Matthew Garrett
2012-08-06 20:16 ` Seth Forshee
2012-08-03 16:02 ` [RFC PATCH 4/5] drm/i915: make intel_lvds_get_edid() more robust Seth Forshee
2012-08-03 16:02 ` [RFC PATCH 5/5] drm/i915: check LVDS for EDID on GPU switches Seth Forshee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344009741-14248-3-git-send-email-seth.forshee@canonical.com \
--to=seth.forshee@canonical.com \
--cc=airlied@linux.ie \
--cc=andreas@meetr.de \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®