From: Arnd Bergmann <arnd@arndb.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Russell King <rmk+kernel@arm.linux.org.uk>,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
Kevin Hilman <khilman@ti.com>, Tony Lindgren <tony@atomide.com>
Subject: [PATCH 2/6] ARM: omap: allow building omap44xx without SMP
Date: Wed, 22 Aug 2012 17:13:06 +0200 [thread overview]
Message-ID: <1345648390-4234-3-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1345648390-4234-1-git-send-email-arnd@arndb.de>
The new omap4 cpuidle implementation currently requires
ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP.
This patch makes it possible to build a non-SMP kernel
for that platform. This is not normally desired for
end-users but can be useful for testing.
Without this patch, building rand-0y2jSKT results in:
drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke':
drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration]
It's not clear if this patch is the best solution for
the problem at hand. I have made sure that we can now
build the kernel in all configurations, but that does
not mean it will actually work on an OMAP44xx.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 2 +-
arch/arm/mach-omap2/cpuidle44xx.c | 3 ++-
include/linux/cpuidle.h | 4 ++++
3 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dd2db02..66a8be3 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -62,7 +62,7 @@ config ARCH_OMAP4
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
- select ARCH_NEEDS_CPU_IDLE_COUPLED
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
config SOC_OMAP5
bool "TI OMAP5"
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index ee05e19..288bee6 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
for_each_cpu(cpu_id, cpu_online_mask) {
dev = &per_cpu(omap4_idle_dev, cpu_id);
dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
dev->coupled_cpus = *cpu_online_mask;
-
+#endif
cpuidle_register_driver(&omap4_idle_driver);
if (cpuidle_register_device(dev)) {
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 040b13b..279b1ea 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -194,6 +194,10 @@ static inline int cpuidle_play_dead(void) {return -ENODEV; }
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a);
+#else
+static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a)
+{
+}
#endif
/******************************
--
1.7.10
next prev parent reply other threads:[~2012-08-22 15:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-22 15:13 [PATCH 0/6] ARM: randconfig bugs Arnd Bergmann
2012-08-22 15:13 ` [PATCH 1/6] ARM: ux500: don't select LEDS_GPIO for snowball Arnd Bergmann
2012-08-23 14:26 ` Arnd Bergmann
2012-08-27 23:40 ` Linus Walleij
2012-08-22 15:13 ` Arnd Bergmann [this message]
2012-08-22 15:36 ` [PATCH 2/6] ARM: omap: allow building omap44xx without SMP Shilimkar, Santosh
2012-08-22 17:22 ` Arnd Bergmann
2012-08-23 7:05 ` Shilimkar, Santosh
2012-08-23 12:12 ` Arnd Bergmann
2012-08-23 13:00 ` Shilimkar, Santosh
2012-08-23 13:32 ` Arnd Bergmann
2012-08-22 15:13 ` [PATCH 3/6] ARM: imx: build pm-imx5 code only when PM is enabled Arnd Bergmann
2012-08-23 2:07 ` Shawn Guo
2012-08-22 15:13 ` [PATCH 4/6] ARM: imx: fix ksz9021rn_phy_fixup Arnd Bergmann
2012-08-23 2:10 ` Shawn Guo
2012-08-22 15:13 ` [PATCH 5/6] ARM: imx: select CPU_FREQ_TABLE when needed Arnd Bergmann
2012-08-23 2:13 ` Shawn Guo
2012-08-22 15:13 ` [PATCH 6/6] ARM: imx: select ARM_CPU_SUSPEND when necessary Arnd Bergmann
2012-08-23 2:41 ` Shawn Guo
2012-08-23 14:20 ` Arnd Bergmann
2012-08-23 14:55 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345648390-4234-3-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome