From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933938Ab2HWKj1 (ORCPT ); Thu, 23 Aug 2012 06:39:27 -0400 Received: from na3sys009aog117.obsmtp.com ([74.125.149.242]:44271 "EHLO na3sys009aog117.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933831Ab2HWKiA (ORCPT ); Thu, 23 Aug 2012 06:38:00 -0400 From: Felipe Balbi To: alan@linux.intel.com Cc: Tony Lindgren , Kevin Hilman , Linux OMAP Mailing List , Linux ARM Kernel Mailing List , linux-serial@vger.kernel.org, Linux Kernel Mailing List , Santosh Shilimkar , Shubhrajyoti Datta , Sourav Poddar , Vikram Pandita , stable@vger.kernel.org, Felipe Balbi Subject: [PATCH v3 20/23] serial: omap: fix software flow control Date: Thu, 23 Aug 2012 13:33:00 +0300 Message-Id: <1345717983-18179-21-git-send-email-balbi@ti.com> X-Mailer: git-send-email 1.7.12.rc3 In-Reply-To: <1345717983-18179-1-git-send-email-balbi@ti.com> References: <1345717983-18179-1-git-send-email-balbi@ti.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Vikram Pandita Software flow control register bits were not defined correctly. Also clarify the IXON and IXOFF logic to reflect what userspace wants. Cc: stable@vger.kernel.org Tested-by: Shubhrajyoti D Signed-off-by: Vikram Pandita Signed-off-by: Shubhrajyoti D Signed-off-by: Felipe Balbi --- arch/arm/plat-omap/include/plat/omap-serial.h | 4 ++-- drivers/tty/serial/omap-serial.c | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 743ac80..12e6805 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -42,10 +42,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 +#define OMAP_UART_SW_TX 0x8 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 +#define OMAP_UART_SW_RX 0x2 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index c3579c0..d49981d 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -606,19 +606,19 @@ serial_omap_configure_xonxoff /* * IXON Flag: - * Enable XON/XOFF flow control on output. - * Transmit XON1, XOFF1 + * Flow control for OMAP.TX + * OMAP.RX should listen for XON/XOFF */ if (termios->c_iflag & IXON) - up->efr |= OMAP_UART_SW_TX; + up->efr |= OMAP_UART_SW_RX; /* * IXOFF Flag: - * Enable XON/XOFF flow control on input. - * Receiver compares XON1, XOFF1. + * Flow control for OMAP.RX + * OMAP.TX should send XON/XOFF */ if (termios->c_iflag & IXOFF) - up->efr |= OMAP_UART_SW_RX; + up->efr |= OMAP_UART_SW_TX; serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); -- 1.7.12.rc3