[PATCH V2 3/3] x86,idle: Set residency to 0 if target Cstate not really enter

[Youquan Song <youquan.song@intel.com>]

When cpuidle governor choose a C-state to enter for idle CPU, but it notice that
there is tasks request to be executed. So the idle CPU will not really enter
the target C-state and go to run task.

In this situation, it will use the residency of previous really entered target 
C-states. Obviously, it is not reasonable. 

So, this patch fix it by set the target C-state residency to 0. 

Signed-off-by: Youquan Song <youquan.song@intel.com>
---
 drivers/cpuidle/cpuidle.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)


diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 2f0083a..7992417 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -136,6 +136,10 @@ int cpuidle_idle_call(void)
 	/* ask the governor for the next state */
 	next_state = cpuidle_curr_governor->select(drv, dev);
 	if (need_resched()) {
+		dev->last_residency = 0;
+		/* give the governor an opportunity to reflect on the outcome */
+		if (cpuidle_curr_governor->reflect)
+			cpuidle_curr_governor->reflect(dev, next_state);
 		local_irq_enable();
 		return 0;
 	}