From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Viresh Kumar <viresh.linux@gmail.com>,
Vinod Koul <vinod.koul@intel.com>,
spear-devel@list.st.com, linux-kernel@vger.kernel.org,
Hein Tibosch <hein_tibosch@yahoo.es>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCHv2 5/6] dw_dmac: autoconfigure data_width or get it via platform data
Date: Fri, 21 Sep 2012 15:05:48 +0300 [thread overview]
Message-ID: <1348229149-29040-6-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1348229149-29040-1-git-send-email-andriy.shevchenko@linux.intel.com>
Not all of the controllers support the 64 bit data width. Make it configurable
via platform data. The driver will try to get a value from the component
parameters, otherwise it will use the platform data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/arm/mach-spear13xx/spear13xx.c | 2 ++
arch/avr32/mach-at32ap/at32ap700x.c | 2 ++
drivers/dma/dw_dmac.c | 46 ++++++++++++++++++++++++++++++-----
drivers/dma/dw_dmac_regs.h | 7 ++++++
include/linux/dw_dmac.h | 5 ++++
5 files changed, 56 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index 9491137..5633d69 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -79,6 +79,8 @@ struct dw_dma_platform_data dmac_plat_data = {
.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
.chan_priority = CHAN_PRIORITY_DESCENDING,
.block_size = 4095U,
+ .nr_masters = 2,
+ .data_width = { 3, 3, 0, 0 },
};
void __init spear13xx_l2x0_init(void)
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 2c4aefe..b323d8d 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -606,6 +606,8 @@ static void __init genclk_init_parent(struct clk *clk)
static struct dw_dma_platform_data dw_dmac0_data = {
.nr_channels = 3,
.block_size = 4095U,
+ .nr_masters = 2,
+ .data_width = { 2, 2, 0, 0 },
};
static struct resource dw_dmac0_resource[] = {
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 4af9fad..d47b76a 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -38,12 +38,22 @@
* which does not support descriptor writeback.
*/
+static inline unsigned int dwc_get_dms(struct dw_dma_slave *slave)
+{
+ return slave ? slave->dst_master : 0;
+}
+
+static inline unsigned int dwc_get_sms(struct dw_dma_slave *slave)
+{
+ return slave ? slave->src_master : 1;
+}
+
#define DWC_DEFAULT_CTLLO(_chan) ({ \
struct dw_dma_slave *__slave = (_chan->private); \
struct dw_dma_chan *_dwc = to_dw_dma_chan(_chan); \
struct dma_slave_config *_sconfig = &_dwc->dma_sconfig; \
- int _dms = __slave ? __slave->dst_master : 0; \
- int _sms = __slave ? __slave->src_master : 1; \
+ int _dms = dwc_get_dms(__slave); \
+ int _sms = dwc_get_sms(__slave); \
u8 _smsize = __slave ? _sconfig->src_maxburst : \
DW_DMA_MSIZE_16; \
u8 _dmsize = __slave ? _sconfig->dst_maxburst : \
@@ -633,6 +643,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
+ struct dw_dma_slave *dws = chan->private;
struct dw_desc *desc;
struct dw_desc *first;
struct dw_desc *prev;
@@ -652,7 +663,11 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
return NULL;
}
- src_width = dst_width = dwc_fast_fls(src | dest | len);
+ src_width = min_t(unsigned int, dwc->dw->data_width[dwc_get_sms(dws)],
+ dwc_fast_fls(src | len));
+
+ dst_width = min_t(unsigned int, dwc->dw->data_width[dwc_get_dms(dws)],
+ dwc_fast_fls(dest | len));
ctllo = DWC_DEFAULT_CTLLO(chan)
| DWC_CTLL_DST_WIDTH(dst_width)
@@ -722,6 +737,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
dma_addr_t reg;
unsigned int reg_width;
unsigned int mem_width;
+ unsigned int data_width;
unsigned int i;
struct scatterlist *sg;
size_t total_len = 0;
@@ -745,6 +761,8 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
DWC_CTLL_FC(DW_DMA_FC_D_M2P);
+ data_width = dwc->dw->data_width[dwc_get_sms(dws)];
+
for_each_sg(sgl, sg, sg_len, i) {
struct dw_desc *desc;
u32 len, dlen, mem;
@@ -752,7 +770,8 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
- mem_width = dwc_fast_fls(mem | len);
+ mem_width = min_t(unsigned int,
+ data_width, dwc_fast_fls(mem | len));
slave_sg_todev_fill_desc:
desc = dwc_desc_get(dwc);
@@ -805,6 +824,8 @@ slave_sg_todev_fill_desc:
ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
DWC_CTLL_FC(DW_DMA_FC_D_P2M);
+ data_width = dwc->dw->data_width[dwc_get_dms(dws)];
+
for_each_sg(sgl, sg, sg_len, i) {
struct dw_desc *desc;
u32 len, dlen, mem;
@@ -812,7 +833,8 @@ slave_sg_todev_fill_desc:
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
- mem_width = dwc_fast_fls(mem | len);
+ mem_width = min_t(unsigned int,
+ data_width, dwc_fast_fls(mem | len));
slave_sg_fromdev_fill_desc:
desc = dwc_desc_get(dwc);
@@ -1417,9 +1439,19 @@ static int __devinit dw_probe(struct platform_device *pdev)
dw->regs = regs;
/* get hardware configuration parameters */
- if (autocfg)
+ if (autocfg) {
max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
+ dw->nr_masters = (dw_params >> DW_PARAMS_NR_MASTER & 3) + 1;
+ for (i = 0; i < dw->nr_masters; i++) {
+ dw->data_width[i] =
+ (dw_params >> DW_PARAMS_DATA_WIDTH(i) & 3) + 2;
+ }
+ } else {
+ dw->nr_masters = pdata->nr_masters;
+ memcpy(dw->data_width, pdata->data_width, 4);
+ }
+
/* Calculate all channel mask before DMA setup */
dw->all_chan_mask = (1 << nr_channels) - 1;
@@ -1466,6 +1498,8 @@ static int __devinit dw_probe(struct platform_device *pdev)
channel_clear_bit(dw, CH_EN, dwc->mask);
+ dwc->dw = dw;
+
/* hardware configuration */
if (autocfg)
/* Decode maximum block size for given channel. The
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 2a1cc53..06f0391 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -198,6 +198,9 @@ struct dw_dma_chan {
/* configuration passed via DMA_SLAVE_CONFIG */
struct dma_slave_config dma_sconfig;
+
+ /* backlink to dw_dma */
+ struct dw_dma *dw;
};
static inline struct dw_dma_chan_regs __iomem *
@@ -224,6 +227,10 @@ struct dw_dma {
u8 all_chan_mask;
+ /* hardware configuration */
+ unsigned char nr_masters;
+ unsigned char data_width[4];
+
struct dw_dma_chan chan[0];
};
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
index 3315ef9..e1c8c9e 100644
--- a/include/linux/dw_dmac.h
+++ b/include/linux/dw_dmac.h
@@ -20,6 +20,9 @@
* @is_private: The device channels should be marked as private and not for
* by the general purpose DMA channel allocator.
* @block_size: Maximum block size supported by the controller
+ * @nr_masters: Number of AHB masters supported by the controller
+ * @data_width: Maximum data width supported by hardware per AHB master
+ * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
@@ -31,6 +34,8 @@ struct dw_dma_platform_data {
#define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */
unsigned char chan_priority;
unsigned short block_size;
+ unsigned char nr_masters;
+ unsigned char data_width[4];
};
/* bursts size */
--
1.7.10.4
next prev parent reply other threads:[~2012-09-21 12:06 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-17 7:39 [PATCH 0/7] dw_dmac: introduce autoconfiguration Andy Shevchenko
2012-09-17 7:39 ` [PATCH 1/7] dw_dmac: mark dwc_dump_chan_regs as inline Andy Shevchenko
2012-09-18 6:35 ` viresh kumar
2012-09-17 7:39 ` [PATCH 2/7] dw_dmac: fill optional encoded parameters in register structure Andy Shevchenko
2012-09-18 6:39 ` viresh kumar
2012-09-18 6:55 ` Andy Shevchenko
2012-09-18 7:59 ` viresh kumar
2012-09-20 9:30 ` Andy Shevchenko
2012-09-20 9:32 ` viresh kumar
2012-09-20 9:51 ` Andy Shevchenko
2012-09-17 7:39 ` [PATCH 3/7] dw_dmac: get number of channels from hardware if possible Andy Shevchenko
2012-09-18 6:50 ` viresh kumar
2012-09-20 9:35 ` Andy Shevchenko
2012-09-20 9:40 ` viresh kumar
2012-09-21 6:04 ` viresh kumar
2012-09-17 7:39 ` [PATCH 4/7] dw_dmac: autoconfigure block_size or use platform data Andy Shevchenko
2012-09-18 6:57 ` viresh kumar
2012-09-20 9:38 ` Andy Shevchenko
2012-09-17 7:39 ` [PATCH 5/7] dw_dmac: autoconfigure data_width or get it via " Andy Shevchenko
2012-09-18 7:11 ` viresh kumar
2012-09-20 9:42 ` Andy Shevchenko
2012-09-20 9:46 ` viresh kumar
2012-09-20 9:53 ` Andy Shevchenko
2012-09-17 7:39 ` [PATCH 6/7] dw_dmac: check if controller supports LLP Andy Shevchenko
2012-09-18 7:13 ` viresh kumar
2012-09-20 9:43 ` Andy Shevchenko
2012-09-17 7:39 ` [PATCH 7/7] dw_dmac: introduce software emulation of LLP transfers Andy Shevchenko
2012-09-18 7:17 ` viresh kumar
2012-09-20 9:46 ` Andy Shevchenko
2012-09-17 16:50 ` [PATCH 0/7] dw_dmac: introduce autoconfiguration Hein Tibosch
2012-09-18 6:11 ` Hein Tibosch
2012-09-18 7:18 ` viresh kumar
2012-09-20 9:48 ` Andy Shevchenko
2012-09-21 12:05 ` [PATCHv2 0/6] " Andy Shevchenko
2012-09-21 12:05 ` [PATCHv2 1/6] dw_dmac: mark dwc_dump_chan_regs as inline Andy Shevchenko
2012-09-21 12:05 ` [PATCHv2 2/6] dw_dmac: fill optional encoded parameters in register structure Andy Shevchenko
2012-09-21 13:55 ` viresh kumar
2012-09-21 12:05 ` [PATCHv2 3/6] dw_dmac: get number of channels from hardware if possible Andy Shevchenko
2012-09-21 13:56 ` viresh kumar
2012-09-21 12:05 ` [PATCHv2 4/6] dw_dmac: autoconfigure block_size or use platform data Andy Shevchenko
2012-09-21 14:00 ` viresh kumar
2012-09-21 15:09 ` Andy Shevchenko
2012-09-21 15:30 ` Viresh Kumar
2012-09-21 12:05 ` Andy Shevchenko [this message]
2012-09-21 14:02 ` [PATCHv2 5/6] dw_dmac: autoconfigure data_width or get it via " viresh kumar
2012-09-25 11:39 ` [PATCHv3] " Andy Shevchenko
2012-09-26 3:29 ` viresh kumar
2012-09-27 10:06 ` Vinod Koul
2012-09-27 10:33 ` Vinod Koul
2012-09-27 13:10 ` Andy Shevchenko
2012-10-01 9:04 ` Andy Shevchenko
2012-10-01 9:45 ` Vinod Koul
2012-10-01 10:07 ` Andy Shevchenko
2012-09-27 14:00 ` Andy Shevchenko
2012-09-27 14:27 ` Vinod Koul
2012-09-21 12:05 ` [PATCHv2 6/6] dw_dmac: introduce software emulation of LLP transfers Andy Shevchenko
2012-09-21 14:03 ` viresh kumar
2012-09-27 10:05 ` [PATCHv2 0/6] dw_dmac: introduce autoconfiguration Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348229149-29040-6-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=hein_tibosch@yahoo.es \
--cc=linux-kernel@vger.kernel.org \
--cc=spear-devel@list.st.com \
--cc=vinod.koul@intel.com \
--cc=viresh.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome