From: Peter Huewe <peterhuewe@gmx.de>
To: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>,
linux-kernel@vger.kernel.org, Peter Huewe <peterhuewe@gmx.de>,
stable@vger.kernel.org
Subject: [PATCH 1/2] extcon: Unregister compat class at module unload to fix oops
Date: Sat, 22 Sep 2012 03:41:09 +0200 [thread overview]
Message-ID: <1348278070-22202-1-git-send-email-peterhuewe@gmx.de> (raw)
If you compile extcon with CONFIG_ANDROID and then load and unload the
module you get a simple oops as the driver does not unregister its
compat class and thus cannot register it again.
Full trace:
root@(none):~# modprobe extcon_class
root@(none):~# rmmod extcon_class
root@(none):~# modprobe extcon_class
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xde/0x100()
sysfs: cannot create duplicate filename '/class/switch'
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451a00: [<602a58bc>] printk+0x0/0xa8
9f451a18: [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451a28: [<6012c6de>] sysfs_add_one+0xde/0x100
9f451a50: [<601d3d90>] strcat+0x0/0x40
9f451a68: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451a90: [<6002fe32>] unblock_signals+0x0/0x84
9f451ab0: [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451ac0: [<6002fe32>] unblock_signals+0x0/0x84
9f451ae8: [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70
9f451b00: [<601d3d90>] strcat+0x0/0x40
9f451b18: [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70
9f451b48: [<6012c6de>] sysfs_add_one+0xde/0x100
9f451b78: [<6012c96f>] create_dir+0x8f/0x100
9f451bc0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451bd8: [<6012cda6>] sysfs_create_dir+0xa6/0x1c0
9f451be8: [<601d89f1>] kvasprintf+0x81/0xa0
9f451bf8: [<601cf0f0>] kobject_get+0x0/0x50
9f451c18: [<601cf396>] kobject_add_internal+0x96/0x280
9f451c60: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451c78: [<601cfb93>] kobject_add+0xd3/0x140
9f451cc0: [<601cfac0>] kobject_add+0x0/0x140
9f451cd0: [<6002fe32>] unblock_signals+0x0/0x84
9f451cf8: [<6002fffc>] set_signals+0x29/0x3f
9f451d28: [<600c1de1>] kmem_cache_alloc+0xe1/0x100
9f451d78: [<601cffa0>] kobject_create_and_add+0x50/0xa0
9f451da8: [<601fbe76>] class_compat_register+0x56/0x80
9f451dc8: [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class]
9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8: [<60033370>] userspace+0x405/0x531
9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8: [<6001a355>] fork_handler+0x95/0xa0
---[ end trace dd512cc03fe1c367 ]---
------------[ cut here ]------------
WARNING: at lib/kobject.c:196 kobject_add_internal+0x26e/0x280()
kobject_add_internal failed for switch with -EEXIST, don't try to
register things with the same name in the same directory.
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451ad0: [<602a58bc>] printk+0x0/0xa8
9f451ae8: [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451af8: [<601cf56e>] kobject_add_internal+0x26e/0x280
9f451b18: [<601cf140>] kobject_put+0x0/0x70
9f451b20: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451b38: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451b88: [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451bc0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451bd8: [<6012cda6>] sysfs_create_dir+0xa6/0x1c0
9f451be8: [<601d89f1>] kvasprintf+0x81/0xa0
9f451bf8: [<601cf0f0>] kobject_get+0x0/0x50
9f451c18: [<601cf56e>] kobject_add_internal+0x26e/0x280
9f451c60: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451c78: [<601cfb93>] kobject_add+0xd3/0x140
9f451cc0: [<601cfac0>] kobject_add+0x0/0x140
9f451cd0: [<6002fe32>] unblock_signals+0x0/0x84
9f451cf8: [<6002fffc>] set_signals+0x29/0x3f
9f451d28: [<600c1de1>] kmem_cache_alloc+0xe1/0x100
9f451d78: [<601cffa0>] kobject_create_and_add+0x50/0xa0
9f451da8: [<601fbe76>] class_compat_register+0x56/0x80
9f451dc8: [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class]
9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8: [<60033370>] userspace+0x405/0x531
9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8: [<6001a355>] fork_handler+0x95/0xa0
---[ end trace dd512cc03fe1c368 ]---
kobject_create_and_add: kobject_add error: -17
------------[ cut here ]------------
WARNING: at drivers/extcon/extcon_class.c:545
create_extcon_class+0xbc/0xd0 [extcon_class]()
cannot allocate
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451c80: [<602a58bc>] printk+0x0/0xa8
9f451c98: [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451ca0: [<6002fe32>] unblock_signals+0x0/0x84
9f451ca8: [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class]
9f451cd0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451ce8: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451d20: [<6002fe32>] unblock_signals+0x0/0x84
9f451d28: [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451d48: [<6002fffc>] set_signals+0x29/0x3f
9f451d58: [<601cf172>] kobject_put+0x32/0x70
9f451d78: [<600c22c3>] kfree+0xb3/0x100
9f451da8: [<601fbe9a>] class_compat_register+0x7a/0x80
9f451dc8: [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class]
9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8: [<60033370>] userspace+0x405/0x531
9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8: [<6001a355>] fork_handler+0x95/0xa0
---[ end trace dd512cc03fe1c369 ]---
FATAL: Error inserting extcon_class
(/lib/modules/3.6.0-rc6-00178-g811315f/kernel/drivers/extcon/extcon_class.ko):
Cannot allocate memory
This patch fixes this.
Cc: stable@vger.kernel.org
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
---
drivers/extcon/extcon_class.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c
index f6419f9..6e914d0 100644
--- a/drivers/extcon/extcon_class.c
+++ b/drivers/extcon/extcon_class.c
@@ -821,6 +821,9 @@ module_init(extcon_class_init);
static void __exit extcon_class_exit(void)
{
+#if defined(CONFIG_ANDROID)
+ class_compat_unregister(switch_class);
+#endif
class_destroy(extcon_class);
}
module_exit(extcon_class_exit);
--
1.7.8.6
next reply other threads:[~2012-09-22 1:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-22 1:41 Peter Huewe [this message]
2012-09-22 1:41 ` [PATCH 2/2] extcon: unregister compat link on cleanup Peter Huewe
2012-09-24 7:24 ` Chanwoo Choi
2012-09-24 7:24 ` [PATCH 1/2] extcon: Unregister compat class at module unload to fix oops Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348278070-22202-1-git-send-email-peterhuewe@gmx.de \
--to=peterhuewe@gmx.de \
--cc=cw00.choi@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®