From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756157Ab2IXOoI (ORCPT ); Mon, 24 Sep 2012 10:44:08 -0400 Received: from eu1sys200aog112.obsmtp.com ([207.126.144.133]:41526 "EHLO eu1sys200aog112.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752252Ab2IXOoD (ORCPT ); Mon, 24 Sep 2012 10:44:03 -0400 From: Ulf Hansson To: , Mike Turquette , Mike Turquette , Cc: Linus Walleij , Lee Jones , Philippe Begnic , Srinidhi Kasagar , Ulf Hansson Subject: [PATCH 3/3] clk: ux500: Update sdmmc clock to 100MHz for u8500 Date: Mon, 24 Sep 2012 16:43:19 +0200 Message-ID: <1348497799-32143-4-git-send-email-ulf.hansson@stericsson.com> X-Mailer: git-send-email 1.7.10 In-Reply-To: <1348497799-32143-1-git-send-email-ulf.hansson@stericsson.com> References: <1348497799-32143-1-git-send-email-ulf.hansson@stericsson.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Ulf Hansson For u8500 and using 100MHz as the frequency also requires the ape opp 100 voltage, thus use the prcmu_opp_volt_scalable clock type. Signed-off-by: Ulf Hansson --- drivers/clk/ux500/u8500_clk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25e..7bebf1f 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -170,10 +170,11 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "mtu0"); clk_register_clkdev(clk, NULL, "mtu1"); - clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT); + clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK, + 100000000, + CLK_IS_ROOT|CLK_SET_RATE_GATE); clk_register_clkdev(clk, NULL, "sdmmc"); - clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); clk_register_clkdev(clk, "dsihs2", "mcde"); -- 1.7.10