From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Viresh Kumar <viresh.linux@gmail.com>,
Vinod Koul <vinod.koul@intel.com>,
linux-kernel@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCHv1 2/6] dmaengine: dw_dmac: add driver for Atmel AT32
Date: Tue, 25 Sep 2012 15:13:06 +0300 [thread overview]
Message-ID: <1348575190-11761-3-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1348575190-11761-1-git-send-email-andriy.shevchenko@linux.intel.com>
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
This driver should be usable on all platforms that depend on clk API.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/dma/Kconfig | 9 +++
drivers/dma/Makefile | 1 +
drivers/dma/dw_dmac.c | 23 +------
drivers/dma/dw_dmac_at32.c | 150 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 162 insertions(+), 21 deletions(-)
create mode 100644 drivers/dma/dw_dmac_at32.c
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index df32537..e47cc90 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -89,6 +89,15 @@ config DW_DMAC
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
+config DW_DMAC_AT32
+ tristate "Synopsys DesignWare AHB DMA support for Atmel"
+ depends on HAVE_CLK
+ select DW_DMAC
+ default y if CPU_AT32AP7000
+ help
+ Support the Synopsys DesignWare AHB DMA controller in the chips
+ such as the Atmel AT32ap7000.
+
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 7428fea..d76020b 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_DW_DMAC_AT32) += dw_dmac_at32.o
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index d9344a7..9c8a500 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -18,7 +18,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/of.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -1681,35 +1680,17 @@ static const struct dev_pm_ops dw_dev_pm_ops = {
.poweroff_noirq = dw_suspend_noirq,
};
-#ifdef CONFIG_OF
-static const struct of_device_id dw_dma_id_table[] = {
- { .compatible = "snps,dma-spear1340" },
- {}
-};
-MODULE_DEVICE_TABLE(of, dw_dma_id_table);
-#endif
-
static struct platform_driver dw_driver = {
+ .probe = dw_probe,
.remove = __devexit_p(dw_remove),
.shutdown = dw_shutdown,
.driver = {
.name = "dw_dmac",
.pm = &dw_dev_pm_ops,
- .of_match_table = of_match_ptr(dw_dma_id_table),
},
};
-static int __init dw_init(void)
-{
- return platform_driver_probe(&dw_driver, dw_probe);
-}
-subsys_initcall(dw_init);
-
-static void __exit dw_exit(void)
-{
- platform_driver_unregister(&dw_driver);
-}
-module_exit(dw_exit);
+module_platform_driver(dw_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
diff --git a/drivers/dma/dw_dmac_at32.c b/drivers/dma/dw_dmac_at32.c
new file mode 100644
index 0000000..7bc7ac4
--- /dev/null
+++ b/drivers/dma/dw_dmac_at32.c
@@ -0,0 +1,150 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * The driver is based on the excerpts from the original dw_dmac.c. That's why
+ * the same copyright holders are mentioned here as well.
+ *
+ * Copyright (C) 2007-2008 Atmel Corporation
+ * Copyright (C) 2010-2011 ST Microelectronics
+ * Copyright (C) 2012 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/dw_dmac.h>
+
+struct dw_at32 {
+ struct platform_device *pdev;
+ struct clk *clk;
+};
+
+static int __init dw_at32_probe(struct platform_device *pdev)
+{
+ struct dw_at32 *at32;
+ struct platform_device *pd;
+ struct dw_dma_platform_data *pdata = pdev->dev.platform_data;
+ static int instance;
+ int ret;
+
+ at32 = devm_kzalloc(&pdev->dev, sizeof(*at32), GFP_KERNEL);
+ if (!at32) {
+ dev_err(&pdev->dev, "can't allocate memory\n");
+ return -ENOMEM;
+ }
+
+ pd = platform_device_alloc("dw_dmac", instance);
+ if (!pd) {
+ dev_err(&pdev->dev, "can't allocate dw_dmac platform device\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, at32);
+
+ pd->dev.parent = &pdev->dev;
+ at32->pdev = pd;
+
+ at32->clk = devm_clk_get(&pdev->dev, "hclk");
+ if (IS_ERR(at32->clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+ clk_prepare_enable(at32->clk);
+
+ ret = platform_device_add_resources(pd, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "can't add resources to the device\n");
+ goto err1;
+ }
+
+ ret = platform_device_add_data(pd, pdata, sizeof(*pdata));
+ if (ret)
+ goto err1;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ goto err1;
+
+ instance++;
+ return 0;
+
+err1:
+ clk_disable_unprepare(at32->clk);
+err0:
+ platform_device_put(pd);
+ return ret;
+}
+
+static int __exit dw_at32_remove(struct platform_device *pdev)
+{
+ struct dw_at32 *at32 = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(at32->clk);
+ platform_device_unregister(at32->pdev);
+
+ return 0;
+}
+
+static void dw_at32_shutdown(struct platform_device *pdev)
+{
+ struct dw_at32 *at32 = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(at32->clk);
+}
+
+static int dw_at32_suspend_noirq(struct device *dev)
+{
+ struct dw_at32 *at32 = platform_get_drvdata(to_platform_device(dev));
+
+ clk_disable_unprepare(at32->clk);
+
+ return 0;
+}
+
+static int dw_at32_resume_noirq(struct device *dev)
+{
+ struct dw_at32 *at32 = platform_get_drvdata(to_platform_device(dev));
+
+ clk_prepare_enable(at32->clk);
+
+ return 0;
+}
+
+static const struct dev_pm_ops dw_at32_pm_ops = {
+ .suspend_noirq = dw_at32_suspend_noirq,
+ .resume_noirq = dw_at32_resume_noirq,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id dw_dma_id_table[] = {
+ { .compatible = "snps,dma-spear1340" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, dw_dma_id_table);
+#endif
+
+static struct platform_driver dw_at32_driver = {
+ .probe = dw_at32_probe,
+ .remove = __exit_p(dw_at32_remove),
+ .shutdown = dw_at32_shutdown,
+ .driver = {
+ .name = "at32_dmac",
+ .pm = &dw_at32_pm_ops,
+ .of_match_table = of_match_ptr(dw_dma_id_table),
+ },
+};
+
+module_platform_driver(dw_at32_driver);
+
+MODULE_ALIAS("platform:at32_dmac");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare DMAC driver for Atmel AT32");
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
--
1.7.10.4
next prev parent reply other threads:[~2012-09-25 12:13 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-25 12:13 [PATCHv1 0/6] dw_dmac: split the driver and introduce PCI part Andy Shevchenko
2012-09-25 12:13 ` [PATCHv1 1/6] dmaengine: dw_dmac: Remove clk API dependency Andy Shevchenko
2012-09-26 3:42 ` viresh kumar
2012-09-26 12:33 ` Andy Shevchenko
2012-09-25 12:13 ` Andy Shevchenko [this message]
2012-09-26 3:50 ` [PATCHv1 2/6] dmaengine: dw_dmac: add driver for Atmel AT32 viresh kumar
2012-09-26 6:47 ` Andy Shevchenko
2012-09-26 6:51 ` viresh kumar
2012-09-26 6:56 ` Andy Shevchenko
2012-09-26 3:52 ` viresh kumar
2012-09-25 12:13 ` [PATCHv1 3/6] dmaengine: dw_dmac: Add PCI part of the driver Andy Shevchenko
2012-09-26 4:00 ` viresh kumar
2012-09-26 7:48 ` Andy Shevchenko
2012-09-25 12:13 ` [PATCHv1 4/6] avr32: at32ap700x: rename DMA controller Andy Shevchenko
2012-09-25 12:13 ` [PATCHv1 5/6] MAINTAINERS: fix indentation for Viresh Kumar Andy Shevchenko
2012-09-26 3:36 ` viresh kumar
2012-09-26 7:10 ` Andy Shevchenko
2012-09-25 12:13 ` [PATCHv1 6/6] MAINTAINERS: add recently created files to dw_dmac section Andy Shevchenko
2012-09-25 13:19 ` Joe Perches
2012-09-25 13:37 ` Andy Shevchenko
2012-09-25 15:33 ` Vinod Koul
2012-09-25 16:57 ` Joe Perches
2012-09-26 6:44 ` Andy Shevchenko
2012-09-26 3:39 ` viresh kumar
2012-09-26 12:40 ` [PATCHv2 0/4] dw_dmac: split the driver and introduce PCI part Andy Shevchenko
2012-09-26 12:40 ` [PATCHv2 1/4] dmaengine: dw_dmac: convert to platform driver Andy Shevchenko
2012-09-26 14:13 ` viresh kumar
2012-09-26 18:00 ` Andy Shevchenko
2012-09-27 3:47 ` viresh kumar
2012-09-26 12:40 ` [PATCHv2 2/4] dmaengine: dw_dmac: Add PCI part of the driver Andy Shevchenko
2012-09-26 14:33 ` viresh kumar
2012-09-26 17:55 ` Andy Shevchenko
2012-09-26 19:41 ` Arnd Bergmann
2012-09-27 3:53 ` viresh kumar
2012-09-27 7:41 ` Arnd Bergmann
2012-09-27 14:22 ` Vinod Koul
2012-09-27 14:42 ` Arnd Bergmann
2012-09-26 12:40 ` [PATCHv2 3/4] dma: move dw_dmac driver to an own directory Andy Shevchenko
2012-09-26 14:53 ` viresh kumar
2012-09-26 17:50 ` Andy Shevchenko
2012-09-26 12:40 ` [PATCHv2 4/4] MAINTAINERS: add recently created files to dw_dmac section Andy Shevchenko
2012-09-26 14:45 ` viresh kumar
2012-09-26 14:48 ` viresh kumar
2012-09-26 17:49 ` Andy Shevchenko
2012-09-27 6:38 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348575190-11761-3-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=vinod.koul@intel.com \
--cc=viresh.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome