From: Alex Williamson <alex.williamson@redhat.com>
To: Florian Dazinger <florian@dazinger.net>
Cc: linux-kernel@vger.kernel.org, "Roedel, Joerg" <Joerg.Roedel@amd.com>
Subject: Re: 3.6-rc7 boot crash + bisection
Date: Tue, 25 Sep 2012 12:32:50 -0600 [thread overview]
Message-ID: <1348597970.28860.114.camel@bling.home> (raw)
In-Reply-To: <20120924210348.5f50677b@brain.lan>
On Mon, 2012-09-24 at 21:03 +0200, Florian Dazinger wrote:
> Hi,
> I think I've found a regression, which causes an early boot crash, I
> appended the kernel output via jpg file, since I do not have a serial
> console or sth.
>
> after bisection, it boils down to this commit:
>
> 9dcd61303af862c279df86aa97fde7ce371be774 is the first bad commit
> commit 9dcd61303af862c279df86aa97fde7ce371be774
> Author: Alex Williamson <alex.williamson@redhat.com>
> Date: Wed May 30 14:19:07 2012 -0600
>
> amd_iommu: Support IOMMU groups
>
> Add IOMMU group support to AMD-Vi device init and uninit code.
> Existing notifiers make sure this gets called for each device.
>
> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
>
> :040000 040000 2f6b1b8e104d6dfec0abaa9646750f9b5a4f4060
> 837ae95e84f6d3553457c4df595a9caa56843c03 M drivers
[switching back to mailing list thread]
I asked Florian for dmesg w/ amd_iommu_dump, here's the relevant lines:
[ 1.485645] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: 3e info 1300
[ 1.485683] AMD-Vi: mmio-addr: 00000000feb20000
[ 1.485901] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:00.0 flags: 00
[ 1.485935] AMD-Vi: DEV_RANGE_END devid: 00:00.2
[ 1.485969] AMD-Vi: DEV_SELECT devid: 00:02.0 flags: 00
[ 1.486002] AMD-Vi: DEV_SELECT_RANGE_START devid: 01:00.0 flags: 00
[ 1.486036] AMD-Vi: DEV_RANGE_END devid: 01:00.1
[ 1.486070] AMD-Vi: DEV_SELECT devid: 00:04.0 flags: 00
[ 1.486103] AMD-Vi: DEV_SELECT devid: 02:00.0 flags: 00
[ 1.486137] AMD-Vi: DEV_SELECT devid: 00:05.0 flags: 00
[ 1.486170] AMD-Vi: DEV_SELECT devid: 03:00.0 flags: 00
[ 1.486204] AMD-Vi: DEV_SELECT devid: 00:06.0 flags: 00
[ 1.486238] AMD-Vi: DEV_SELECT devid: 04:00.0 flags: 00
[ 1.486271] AMD-Vi: DEV_SELECT devid: 00:07.0 flags: 00
[ 1.486305] AMD-Vi: DEV_SELECT devid: 05:00.0 flags: 00
[ 1.486338] AMD-Vi: DEV_SELECT devid: 00:09.0 flags: 00
[ 1.486372] AMD-Vi: DEV_SELECT devid: 06:00.0 flags: 00
[ 1.486406] AMD-Vi: DEV_SELECT devid: 00:0b.0 flags: 00
[ 1.486439] AMD-Vi: DEV_SELECT devid: 07:00.0 flags: 00
[ 1.486473] AMD-Vi: DEV_ALIAS_RANGE devid: 08:01.0 flags: 00 devid_to: 08:00.0
[ 1.486510] AMD-Vi: DEV_RANGE_END devid: 08:1f.7
[ 1.486548] AMD-Vi: DEV_SELECT devid: 00:11.0 flags: 00
[ 1.486581] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:12.0 flags: 00
[ 1.486620] AMD-Vi: DEV_RANGE_END devid: 00:12.2
[ 1.486654] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:13.0 flags: 00
[ 1.486688] AMD-Vi: DEV_RANGE_END devid: 00:13.2
[ 1.486721] AMD-Vi: DEV_SELECT devid: 00:14.0 flags: d7
[ 1.486755] AMD-Vi: DEV_SELECT devid: 00:14.3 flags: 00
[ 1.486788] AMD-Vi: DEV_SELECT devid: 00:14.4 flags: 00
[ 1.486822] AMD-Vi: DEV_ALIAS_RANGE devid: 09:00.0 flags: 00 devid_to: 00:14.4
[ 1.486859] AMD-Vi: DEV_RANGE_END devid: 09:1f.7
[ 1.486897] AMD-Vi: DEV_SELECT devid: 00:14.5 flags: 00
[ 1.486931] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:16.0 flags: 00
[ 1.486965] AMD-Vi: DEV_RANGE_END devid: 00:16.2
[ 1.487055] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
> lspci:
> 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
> 00:00.2 IOMMU: Advanced Micro Devices [AMD] nee ATI RD990 I/O Memory Management Unit (IOMMU)
> 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port B)
> 00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D)
> 00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port E)
> 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port F)
> 00:07.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port G)
> 00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port H)
> 00:0b.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (NB-SB link)
> 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
> 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
> 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
> 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
> 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
> 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
> 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
> 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
> 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
> 00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
> 00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
> 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730XT [Radeon HD 4670]
> 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]
> 02:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
> 03:00.0 Ethernet controller: Intel Corporation 82583V Gigabit Network Connection
> 04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
> 05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
> 06:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
> 07:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
> 08:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788
> [Oxygen HD Audio]
We can see this is clearly wrong:
[ 1.486473] AMD-Vi: DEV_ALIAS_RANGE devid: 08:01.0 flags: 00 devid_to: 08:00.0
[ 1.486510] AMD-Vi: DEV_RANGE_END devid: 08:1f.7
So the BIOS is telling us to alias everything in the range of 08:00.0 to
08:1f.7 to device id 08:01.0, which doesn't exist :( Can you send lspci
-vvv? I suspect we'll find that 07:00.0 sources bus 08 and that alias
should really be to 07:00.0 instead of 08:01.0. Please also provide
dmidecode for this system, we may need to create a quirk for this box.
Thanks,
Alex
next prev parent reply other threads:[~2012-09-25 18:32 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-24 19:03 Florian Dazinger
2012-09-25 18:32 ` Alex Williamson [this message]
2012-09-25 18:42 ` Alex Williamson
2012-09-25 18:54 ` Florian Dazinger
2012-09-25 19:43 ` Alex Williamson
2012-09-25 23:01 ` Florian Dazinger
2012-09-26 3:12 ` Alex Williamson
2012-09-26 14:43 ` Roedel, Joerg
2012-09-26 14:52 ` Alex Williamson
2012-09-26 15:04 ` Roedel, Joerg
2012-09-26 16:13 ` Alex Williamson
2012-09-26 16:43 ` Florian Dazinger
2012-09-26 17:47 ` Florian Dazinger
2012-09-26 13:20 ` Roedel, Joerg
2012-09-26 14:35 ` Alex Williamson
2012-09-26 15:10 ` Roedel, Joerg
2012-09-26 16:21 ` Alex Williamson
2012-09-26 19:50 ` Alex Williamson
2012-09-26 22:04 ` Alex Williamson
2012-09-27 16:22 ` Florian Dazinger
2012-09-28 13:58 ` Roedel, Joerg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348597970.28860.114.camel@bling.home \
--to=alex.williamson@redhat.com \
--cc=Joerg.Roedel@amd.com \
--cc=florian@dazinger.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®