From: Matt Porter <mporter@ti.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Hans J. Koch" <hjk@hansjkoch.de>, Sekhar Nori <nsekhar@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
Linux DaVinci Kernel List
<davinci-linux-open-source@linux.davincidsp.com>,
Ben Gardiner <bengardiner@nanometrics.ca>
Subject: [PATCH v3 5/6] ARM: davinci: Add support for PRUSS on DA850
Date: Wed, 3 Oct 2012 10:55:32 -0400 [thread overview]
Message-ID: <1349276133-26408-6-git-send-email-mporter@ti.com> (raw)
In-Reply-To: <1349276133-26408-1-git-send-email-mporter@ti.com>
Adds PRUSS clock, registers the L3RAM pool, and registers the
platform device for uio_pruss on DA850.
Signed-off-by: Matt Porter <mporter@ti.com>
---
arch/arm/mach-davinci/board-da850-evm.c | 12 +++++
arch/arm/mach-davinci/da850.c | 7 +++
arch/arm/mach-davinci/devices-da8xx.c | 66 ++++++++++++++++++++++++++++
arch/arm/mach-davinci/include/mach/da8xx.h | 2 +
4 files changed, 87 insertions(+)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1295e61..acc6e84 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -29,6 +29,7 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
#include <linux/input/tps6507x-ts.h>
+#include <linux/platform_data/uio_pruss.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/delay.h>
@@ -42,6 +43,7 @@
#include <mach/da8xx.h>
#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
+#include <mach/sram.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/spi-davinci.h>
@@ -1253,6 +1255,10 @@ static __init int da850_wl12xx_init(void)
#endif /* CONFIG_DA850_WL12XX */
+struct uio_pruss_pdata da8xx_pruss_uio_pdata = {
+ .pintc_base = 0x4000,
+};
+
#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000)
static __init void da850_evm_init(void)
@@ -1339,6 +1345,12 @@ static __init void da850_evm_init(void)
pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
ret);
+ da8xx_pruss_uio_pdata.l3ram_pool = sram_get_gen_pool();
+ ret = da8xx_register_pruss_uio(&da8xx_pruss_uio_pdata);
+ if (ret)
+ pr_warning("pruss_uio initialization failed: %d\n",
+ ret);
+
/* Handle board specific muxing for LCD here */
ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
if (ret)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index d8d69de..7c01d31 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -212,6 +212,12 @@ static struct clk tptc2_clk = {
.flags = ALWAYS_ENABLED,
};
+static struct clk pruss_clk = {
+ .name = "pruss",
+ .parent = &pll0_sysclk2,
+ .lpsc = DA8XX_LPSC0_PRUSS,
+};
+
static struct clk uart0_clk = {
.name = "uart0",
.parent = &pll0_sysclk2,
@@ -378,6 +384,7 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "tptc1", &tptc1_clk),
CLK(NULL, "tpcc1", &tpcc1_clk),
CLK(NULL, "tptc2", &tptc2_clk),
+ CLK(NULL, "pruss", &pruss_clk),
CLK(NULL, "uart0", &uart0_clk),
CLK(NULL, "uart1", &uart1_clk),
CLK(NULL, "uart2", &uart2_clk),
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index bd2f72b..7c2e0d2 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -518,6 +518,72 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
}
}
+#define DA8XX_PRUSS_MEM_BASE 0x01C30000
+
+static struct resource da8xx_pruss_resources[] = {
+ {
+ .start = DA8XX_PRUSS_MEM_BASE,
+ .end = DA8XX_PRUSS_MEM_BASE + 0xFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DA8XX_EVTOUT0,
+ .end = IRQ_DA8XX_EVTOUT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_EVTOUT1,
+ .end = IRQ_DA8XX_EVTOUT1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_EVTOUT2,
+ .end = IRQ_DA8XX_EVTOUT2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_EVTOUT3,
+ .end = IRQ_DA8XX_EVTOUT3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_EVTOUT4,
+ .end = IRQ_DA8XX_EVTOUT4,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_EVTOUT5,
+ .end = IRQ_DA8XX_EVTOUT5,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_EVTOUT6,
+ .end = IRQ_DA8XX_EVTOUT6,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_EVTOUT7,
+ .end = IRQ_DA8XX_EVTOUT7,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device da8xx_pruss_uio_dev = {
+ .name = "pruss_uio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(da8xx_pruss_resources),
+ .resource = da8xx_pruss_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ }
+};
+
+int __init da8xx_register_pruss_uio(struct uio_pruss_pdata *config)
+{
+ da8xx_pruss_uio_dev.dev.platform_data = config;
+ return platform_device_register(&da8xx_pruss_uio_dev);
+}
+
static const struct display_panel disp_panel = {
QVGA,
16,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 20553cf..138e618 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -25,6 +25,7 @@
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/uio_pruss.h>
extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;
@@ -83,6 +84,7 @@ int da8xx_register_watchdog(void);
int da8xx_register_usb20(unsigned mA, unsigned potpgt);
int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
int da8xx_register_emac(void);
+int da8xx_register_pruss_uio(struct uio_pruss_pdata *config);
int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
int da850_register_mmcsd1(struct davinci_mmc_config *config);
--
1.7.9.5
next prev parent reply other threads:[~2012-10-03 14:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-03 14:55 [PATCH v3 0/6] uio_pruss cleanup and platform support Matt Porter
2012-10-03 14:55 ` [PATCH v3 1/6] ARM: davinci: sram: ioremap the davinci_soc_info specified sram regions Matt Porter
2012-10-04 11:48 ` Sekhar Nori
2012-10-04 12:49 ` Matt Porter
2012-10-03 14:55 ` [PATCH v3 2/6] ARM: davinci: da850-dm646x: remove the SRAM_VIRT iotable entry Matt Porter
2012-10-04 11:53 ` Sekhar Nori
2012-10-04 12:54 ` Matt Porter
2012-10-03 14:55 ` [PATCH v3 3/6] ARM: davinci: da850: changed SRAM allocator to shared ram Matt Porter
2012-10-04 11:57 ` Sekhar Nori
2012-10-04 12:56 ` Matt Porter
2012-10-04 20:39 ` Matt Porter
2012-10-03 14:55 ` [PATCH v3 4/6] ARM: davinci: add platform hook to fetch the SRAM pool Matt Porter
2012-10-03 14:55 ` Matt Porter [this message]
2012-10-04 12:22 ` [PATCH v3 5/6] ARM: davinci: Add support for PRUSS on DA850 Sekhar Nori
2012-10-04 13:08 ` Matt Porter
2012-10-04 16:35 ` Matt Porter
2012-10-05 10:30 ` Sekhar Nori
2012-10-03 14:55 ` [PATCH v3 6/6] uio: uio_pruss: replace private SRAM API with genalloc Matt Porter
2012-10-04 9:11 ` [PATCH v3 0/6] uio_pruss cleanup and platform support Philipp Zabel
2012-10-04 12:42 ` Matt Porter
2012-10-04 12:54 ` Sekhar Nori
2012-10-04 13:10 ` Matt Porter
2012-10-04 13:35 ` Philipp Zabel
2012-10-04 13:54 ` Matt Porter
2012-10-04 14:06 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349276133-26408-6-git-send-email-mporter@ti.com \
--to=mporter@ti.com \
--cc=bengardiner@nanometrics.ca \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=gregkh@linuxfoundation.org \
--cc=hjk@hansjkoch.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®