From: Florian Fainelli <florian@openwrt.org>
To: stern@rowland.harvard.edu
Cc: linux-usb@vger.kernel.org, Florian Fainelli <florian@openwrt.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Hauke Mehrtens <hauke@hauke-m.de>, Felipe Balbi <balbi@ti.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 10/25] USB: ehci: remove Octeon EHCI driver
Date: Wed, 3 Oct 2012 17:03:05 +0200 [thread overview]
Message-ID: <1349276601-8371-11-git-send-email-florian@openwrt.org> (raw)
In-Reply-To: <1349276601-8371-1-git-send-email-florian@openwrt.org>
Users of this driver have been converted to use the ehci platform driver
instead.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
drivers/usb/host/Kconfig | 8 +-
drivers/usb/host/ehci-octeon.c | 203 ----------------------------------------
2 files changed, 6 insertions(+), 205 deletions(-)
delete mode 100644 drivers/usb/host/ehci-octeon.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b1deb0f..18cf37f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -627,11 +627,15 @@ config USB_IMX21_HCD
module will be called "imx21-hcd".
config USB_OCTEON_EHCI
- bool "Octeon on-chip EHCI support"
- depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON
+ bool "Octeon on-chip EHCI support (DEPRECATED)"
+ depends on USB && CPU_CAVIUM_OCTEON
default n
select USB_EHCI_BIG_ENDIAN_MMIO
+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
help
+ This option is deprecated now and the driver was removed, use
+ USB_EHCI_HCD_PLATFORM instead.
+
Enable support for the Octeon II SOC's on-chip EHCI
controller. It is needed for high-speed (480Mbit/sec)
USB 2.0 device support. All CN6XXX based chips with USB are
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
deleted file mode 100644
index ba26957a..0000000
--- a/drivers/usb/host/ehci-octeon.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * EHCI HCD glue for Cavium Octeon II SOCs.
- *
- * Loosely based on ehci-au1xxx.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2010 Cavium Networks
- *
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-uctlx-defs.h>
-
-#define OCTEON_EHCI_HCD_NAME "octeon-ehci"
-
-/* Common clock init code. */
-void octeon2_usb_clocks_start(void);
-void octeon2_usb_clocks_stop(void);
-
-static void ehci_octeon_start(void)
-{
- union cvmx_uctlx_ehci_ctl ehci_ctl;
-
- octeon2_usb_clocks_start();
-
- ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0));
- /* Use 64-bit addressing. */
- ehci_ctl.s.ehci_64b_addr_en = 1;
- ehci_ctl.s.l2c_addr_msb = 0;
- ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */
- ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */
- cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64);
-}
-
-static void ehci_octeon_stop(void)
-{
- octeon2_usb_clocks_stop();
-}
-
-static const struct hc_driver ehci_octeon_hc_driver = {
- .description = hcd_name,
- .product_desc = "Octeon EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static u64 ehci_octeon_dma_mask = DMA_BIT_MASK(64);
-
-static int ehci_octeon_drv_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct ehci_hcd *ehci;
- struct resource *res_mem;
- int irq;
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "No irq assigned\n");
- return -ENODEV;
- }
-
- res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res_mem == NULL) {
- dev_err(&pdev->dev, "No register space assigned\n");
- return -ENODEV;
- }
-
- /*
- * We can DMA from anywhere. But the descriptors must be in
- * the lower 4GB.
- */
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- pdev->dev.dma_mask = &ehci_octeon_dma_mask;
-
- hcd = usb_create_hcd(&ehci_octeon_hc_driver, &pdev->dev, "octeon");
- if (!hcd)
- return -ENOMEM;
-
- hcd->rsrc_start = res_mem->start;
- hcd->rsrc_len = resource_size(res_mem);
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
- OCTEON_EHCI_HCD_NAME)) {
- dev_err(&pdev->dev, "request_mem_region failed\n");
- ret = -EBUSY;
- goto err1;
- }
-
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -ENOMEM;
- goto err2;
- }
-
- ehci_octeon_start();
-
- ehci = hcd_to_ehci(hcd);
-
- /* Octeon EHCI matches CPU endianness. */
-#ifdef __BIG_ENDIAN
- ehci->big_endian_mmio = 1;
-#endif
-
- ehci->caps = hcd->regs;
-
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret) {
- dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
- goto err3;
- }
-
- platform_set_drvdata(pdev, hcd);
-
- /* root ports should always stay powered */
- ehci_port_power(ehci, 1);
-
- return 0;
-err3:
- ehci_octeon_stop();
-
- iounmap(hcd->regs);
-err2:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
- usb_put_hcd(hcd);
- return ret;
-}
-
-static int ehci_octeon_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
-
- ehci_octeon_stop();
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-static struct platform_driver ehci_octeon_driver = {
- .probe = ehci_octeon_drv_probe,
- .remove = ehci_octeon_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = OCTEON_EHCI_HCD_NAME,
- .owner = THIS_MODULE,
- }
-};
-
-MODULE_ALIAS("platform:" OCTEON_EHCI_HCD_NAME);
--
1.7.9.5
next prev parent reply other threads:[~2012-10-03 15:17 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1349276601-8371-1-git-send-email-florian@openwrt.org>
2012-10-03 15:02 ` [PATCH 01/25] USB: ehci: remove IXP4xx " Florian Fainelli
2012-10-03 15:02 ` [PATCH 02/25] MIPS: Loongson 1B: use ehci-platform instead of ehci-ls1x Florian Fainelli
2012-10-03 15:02 ` [PATCH 03/25] USB: ehci: remove Loongson 1B EHCI driver Florian Fainelli
2012-10-03 15:02 ` [PATCH 04/25] MIPS: Netlogic: use ehci-platform driver Florian Fainelli
2012-10-03 16:47 ` Alan Stern
2012-10-04 14:51 ` Florian Fainelli
2012-10-04 10:51 ` Jonas Gorski
2012-10-03 15:03 ` [PATCH 05/25] USB: ehci: remove Netlogic XLS EHCI driver Florian Fainelli
2012-10-03 15:03 ` [PATCH 06/25] USB: ehci: allow need_io_watchdog to be passed to ehci-platform driver Florian Fainelli
2012-10-03 16:01 ` Alan Stern
2012-10-03 16:12 ` Florian Fainelli
2012-10-03 15:03 ` [PATCH 07/25] MIPS: Alchemy: use the ehci platform driver Florian Fainelli
2012-10-03 15:14 ` Manuel Lauss
2012-10-03 15:20 ` Florian Fainelli
2012-10-03 15:03 ` [PATCH 08/25] USB: ehci: remove Alchemy EHCI driver Florian Fainelli
2012-10-03 15:03 ` [PATCH 09/25] MIPS: Octeon: use ehci-platform driver Florian Fainelli
2012-10-03 16:45 ` David Daney
2012-10-03 18:30 ` Florian Fainelli
2012-10-03 15:03 ` Florian Fainelli [this message]
2012-10-03 15:03 ` [PATCH 11/25] ARM: cns3xxx: use ehci platform driver Florian Fainelli
2012-10-03 15:03 ` [PATCH 12/25] USB: ehci: remove CNS3xxx EHCI " Florian Fainelli
2012-10-03 16:16 ` Alan Stern
2012-10-03 15:03 ` [PATCH 13/25] USB: ohci: allow platform driver to specify the number of ports Florian Fainelli
2012-10-03 15:03 ` [PATCH 14/25] MIPS: PNX8550: use OHCI platform driver Florian Fainelli
2012-10-03 15:03 ` [PATCH 14/25] MIPS: PNX8550: useOHCI " Florian Fainelli
2012-10-03 15:03 ` [PATCH 15/25] USB: ohci: remove PNX8550 OHCI driver Florian Fainelli
2012-10-03 15:03 ` [PATCH 16/25] ARM: cns3xxx: use OHCI platform driver Florian Fainelli
2012-10-03 15:03 ` [PATCH 17/25] USB: ohci: remove CNS3xxx " Florian Fainelli
2012-10-03 15:03 ` [PATCH 18/25] MIPS: Octeon: use " Florian Fainelli
2012-10-03 16:47 ` David Daney
2012-10-03 15:03 ` [PATCH 19/25] USB: ohci: remove Octeon " Florian Fainelli
2012-10-03 15:03 ` [PATCH 20/25] MIPS: Netlogic: convert to use " Florian Fainelli
2012-10-04 10:53 ` Jonas Gorski
2012-10-03 15:03 ` [PATCH 21/25] USB: ohci: remove Netlogic XLS " Florian Fainelli
2012-10-03 15:03 ` [PATCH 22/25] sh: convert boards to use the " Florian Fainelli
2012-10-03 15:03 ` [PATCH 23/25] USB: ohci: remove OHCI SH " Florian Fainelli
2012-10-03 15:03 ` [PATCH 24/25] MIPS: Alchemy: use the OHCI " Florian Fainelli
2012-10-03 15:21 ` Manuel Lauss
2012-10-03 15:24 ` Florian Fainelli
2012-10-03 15:26 ` Manuel Lauss
2012-10-03 16:07 ` Manuel Lauss
2012-10-03 16:13 ` Florian Fainelli
2012-10-03 15:03 ` [PATCH 25/25] USB: ohci: remove Alchemy " Florian Fainelli
2012-10-03 16:47 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349276601-8371-11-git-send-email-florian@openwrt.org \
--to=florian@openwrt.org \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=hauke@hauke-m.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®