[PATCH 3/5] mfd: tps65910: Initialize mfd devices after all initialization done

[Laxman Dewangan <ldewangan@nvidia.com>]

Add sub devices of tps65910 after all initialization like interrupt,
clock etc. is done. This will make sure that require data gets
initialized properly before sub devices probe's get called.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 drivers/mfd/tps65910.c |   18 +++++++++---------
 1 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 11adedb..f7f9d3a 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -495,18 +495,10 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	ret = mfd_add_devices(tps65910->dev, -1,
-			      tps65910s, ARRAY_SIZE(tps65910s),
-			      NULL, 0, NULL);
-	if (ret < 0) {
-		dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
-		return ret;
-	}
-
 	init_data->irq = pmic_plat_data->irq;
 	init_data->irq_base = pmic_plat_data->irq_base;
-
 	tps65910_irq_init(tps65910, init_data->irq, init_data);
+
 	tps65910_ck32k_init(tps65910, pmic_plat_data);
 	tps65910_sleepinit(tps65910, pmic_plat_data);
 
@@ -515,6 +507,14 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 		pm_power_off = tps65910_power_off;
 	}
 
+	ret = mfd_add_devices(tps65910->dev, -1,
+			      tps65910s, ARRAY_SIZE(tps65910s),
+			      NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
+		return ret;
+	}
+
 	return ret;
 }
 
-- 
1.7.1.1