From: Roland Stigge <stigge@antcom.de>
To: grant.likely@secretlab.ca, linus.walleij@linaro.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, w.sang@pengutronix.de,
jbe@pengutronix.de, plagnioj@jcrosoft.com, highguy@gmail.com,
broonie@opensource.wolfsonmicro.com, daniel-gl@gmx.net,
gregkh@linuxfoundation.org, rmallon@gmail.com
Cc: Roland Stigge <stigge@antcom.de>
Subject: [PATCH RFC 06/11 v4] gpio-generic: Add block GPIO API
Date: Tue, 16 Oct 2012 01:31:22 +0200 [thread overview]
Message-ID: <1350343887-7344-7-git-send-email-stigge@antcom.de> (raw)
In-Reply-To: <1350343887-7344-1-git-send-email-stigge@antcom.de>
This patch adds block GPIO API support to the gpio-generic driver.
Signed-off-by: Roland Stigge <stigge@antcom.de>
---
drivers/gpio/gpio-generic.c | 56 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
--- linux-2.6.orig/drivers/gpio/gpio-generic.c
+++ linux-2.6/drivers/gpio/gpio-generic.c
@@ -122,6 +122,13 @@ static int bgpio_get(struct gpio_chip *g
return bgc->read_reg(bgc->reg_dat) & bgc->pin2mask(bgc, gpio);
}
+static unsigned long bgpio_get_block(struct gpio_chip *gc, unsigned long mask)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+
+ return bgc->read_reg(bgc->reg_dat) & mask;
+}
+
static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct bgpio_chip *bgc = to_bgpio_chip(gc);
@@ -170,6 +177,51 @@ static void bgpio_set_set(struct gpio_ch
spin_unlock_irqrestore(&bgc->lock, flags);
}
+static void bgpio_set_block(struct gpio_chip *gc, unsigned long mask,
+ unsigned long values)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&bgc->lock, flags);
+
+ bgc->data &= ~mask;
+ bgc->data |= values & mask;
+
+ bgc->write_reg(bgc->reg_dat, bgc->data);
+
+ spin_unlock_irqrestore(&bgc->lock, flags);
+}
+
+static void bgpio_set_with_clear_block(struct gpio_chip *gc, unsigned long mask,
+ unsigned long values)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+ unsigned long set_bits = values & mask;
+ unsigned long clr_bits = ~values & mask;
+
+ if (set_bits)
+ bgc->write_reg(bgc->reg_set, set_bits);
+ if (clr_bits)
+ bgc->write_reg(bgc->reg_set, clr_bits);
+}
+
+static void bgpio_set_set_block(struct gpio_chip *gc, unsigned long mask,
+ unsigned long values)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&bgc->lock, flags);
+
+ bgc->data &= ~mask;
+ bgc->data |= values & mask;
+
+ bgc->write_reg(bgc->reg_set, bgc->data);
+
+ spin_unlock_irqrestore(&bgc->lock, flags);
+}
+
static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
return 0;
@@ -317,14 +369,18 @@ static int bgpio_setup_io(struct bgpio_c
bgc->reg_set = set;
bgc->reg_clr = clr;
bgc->gc.set = bgpio_set_with_clear;
+ bgc->gc.set_block = bgpio_set_with_clear_block;
} else if (set && !clr) {
bgc->reg_set = set;
bgc->gc.set = bgpio_set_set;
+ bgc->gc.set_block = bgpio_set_set_block;
} else {
bgc->gc.set = bgpio_set;
+ bgc->gc.set_block = bgpio_set_block;
}
bgc->gc.get = bgpio_get;
+ bgc->gc.get_block = bgpio_get_block;
return 0;
}
next prev parent reply other threads:[~2012-10-15 23:32 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-15 23:31 [PATCH RFC 00/11 v4] gpio: Add block GPIO Roland Stigge
2012-10-15 23:31 ` [PATCH RFC 01/11 v4] gpio: Add a block GPIO API to gpiolib Roland Stigge
2012-10-16 0:18 ` Ryan Mallon
2012-10-15 23:31 ` [PATCH RFC 02/11 v4] gpio: Add sysfs support to block GPIO API Roland Stigge
2012-10-15 23:57 ` Greg KH
2012-10-16 12:53 ` Roland Stigge
2012-10-16 16:43 ` Greg KH
2012-10-16 17:27 ` Linus Walleij
2012-10-16 17:40 ` Greg KH
2012-10-16 21:08 ` Linus Walleij
2012-10-16 21:25 ` Greg KH
2012-10-17 8:39 ` Roland Stigge
2012-10-15 23:31 ` [PATCH RFC 03/11 v4] gpio: Add device tree " Roland Stigge
2012-10-15 23:31 ` [PATCH RFC 04/11 v4] gpio-max730x: Add " Roland Stigge
2012-10-15 23:31 ` [PATCH RFC 05/11 v4] gpio-lpc32xx: " Roland Stigge
2012-10-15 23:31 ` Roland Stigge [this message]
2012-10-15 23:31 ` [PATCH RFC 07/11 v4] gpio-pca953x: " Roland Stigge
2012-10-15 23:31 ` [PATCH RFC 08/11 v4] gpio-em: " Roland Stigge
2012-10-15 23:31 ` [PATCH RFC 09/11 v4] gpio-pl061: " Roland Stigge
2012-10-15 23:31 ` [PATCH RFC 10/11 v4] gpio-max732x: " Roland Stigge
2012-10-15 23:31 ` [PATCH RFC 11/11 v4] gpio-pcf857x: " Roland Stigge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350343887-7344-7-git-send-email-stigge@antcom.de \
--to=stigge@antcom.de \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=daniel-gl@gmx.net \
--cc=grant.likely@secretlab.ca \
--cc=gregkh@linuxfoundation.org \
--cc=highguy@gmail.com \
--cc=jbe@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=plagnioj@jcrosoft.com \
--cc=rmallon@gmail.com \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome