mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Prabhakar Lad <prabhakar.csengg@gmail.com>
To: LMML <linux-media@vger.kernel.org>,
	DLOS <davinci-linux-open-source@linux.davincidsp.com>
Cc: Manjunath Hadli <manjunath.hadli@ti.com>,
	LKML <linux-kernel@vger.kernel.org>,
	"Lad, Prabhakar" <prabhakar.lad@ti.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@infradead.org>
Subject: [PATCH v2] media: davinci: vpbe: fix build warning
Date: Tue, 23 Oct 2012 18:54:37 +0530	[thread overview]
Message-ID: <1350998677-19890-1-git-send-email-prabhakar.lad@ti.com> (raw)

From: Lad, Prabhakar <prabhakar.lad@ti.com>

Warnings were generated because of the following commit changed data type for
address pointer

195bbca ARM: 7500/1: io: avoid writeback addressing modes for __raw_ accessors
add  __iomem annotation to fix following warnings

drivers/media/platform/davinci/vpbe_osd.c: In function ‘osd_read’:
drivers/media/platform/davinci/vpbe_osd.c:49:2: warning: passing
 argument 1 of ‘__raw_readl’ makes pointer from integer without a cast [enabled by default]
arch/arm/include/asm/io.h:104:19: note: expected ‘const volatile
 void *’ but argument is of type ‘long unsigned int’

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 Changes for v2:
 1: Made the base addr to void __iomem * instead of long unsigned,
    as pointed by Laurent.

 drivers/media/platform/davinci/vpbe_osd.c |    9 ++++-----
 include/media/davinci/vpbe_osd.h          |    2 +-
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/davinci/vpbe_osd.c b/drivers/media/platform/davinci/vpbe_osd.c
index bba299d..707f243 100644
--- a/drivers/media/platform/davinci/vpbe_osd.c
+++ b/drivers/media/platform/davinci/vpbe_osd.c
@@ -62,7 +62,7 @@ static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset)
 {
 	struct osd_state *osd = sd;
 
-	u32 addr = osd->osd_base + offset;
+	void __iomem *addr = osd->osd_base + offset;
 	u32 val = readl(addr) | mask;
 
 	writel(val, addr);
@@ -74,7 +74,7 @@ static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset)
 {
 	struct osd_state *osd = sd;
 
-	u32 addr = osd->osd_base + offset;
+	void __iomem *addr = osd->osd_base + offset;
 	u32 val = readl(addr) & ~mask;
 
 	writel(val, addr);
@@ -87,7 +87,7 @@ static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val,
 {
 	struct osd_state *osd = sd;
 
-	u32 addr = osd->osd_base + offset;
+	void __iomem *addr = osd->osd_base + offset;
 	u32 new_val = (readl(addr) & ~mask) | (val & mask);
 
 	writel(new_val, addr);
@@ -1559,8 +1559,7 @@ static int osd_probe(struct platform_device *pdev)
 		ret = -ENODEV;
 		goto free_mem;
 	}
-	osd->osd_base = (unsigned long)ioremap_nocache(res->start,
-							osd->osd_size);
+	osd->osd_base = ioremap_nocache(res->start, osd->osd_size);
 	if (!osd->osd_base) {
 		dev_err(osd->dev, "Unable to map the OSD region\n");
 		ret = -ENODEV;
diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h
index d7e397a..5ab0d8d 100644
--- a/include/media/davinci/vpbe_osd.h
+++ b/include/media/davinci/vpbe_osd.h
@@ -357,7 +357,7 @@ struct osd_state {
 	spinlock_t lock;
 	struct device *dev;
 	dma_addr_t osd_base_phys;
-	unsigned long osd_base;
+	void __iomem *osd_base;
 	unsigned long osd_size;
 	/* 1-->the isr will toggle the VID0 ping-pong buffer */
 	int pingpong;
-- 
1.7.4.1


             reply	other threads:[~2012-10-23 13:25 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-23 13:24 Prabhakar Lad [this message]
2012-10-25 13:10 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350998677-19890-1-git-send-email-prabhakar.lad@ti.com \
    --to=prabhakar.csengg@gmail.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=manjunath.hadli@ti.com \
    --cc=mchehab@infradead.org \
    --cc=prabhakar.lad@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®