[PATCH] atm: he: use tasklet_kill in device remove/release process

[Xiaotian Feng <xtfeng@gmail.com>]

Some driver uses tasklet_disable in device remove/release process,
tasklet_disable will inc tasklet->count and return. If the tasklet
is not handled yet under some softirq pressure, the tasklet will be
placed on the tasklet_vec, never have a chance to be excuted. This might
lead to a heavy loaded ksoftirqd, wakeup with pending_softirq, but
tasklet is disabled. tasklet_kill should be used in this case.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Chas Williams <chas@cmf.nrl.navy.mil>
Cc: linux-atm-general@lists.sourceforge.net
---
 drivers/atm/he.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index b182c2f..1dfcc9a 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -1556,7 +1556,7 @@ he_stop(struct he_dev *he_dev)
 		gen_cntl_0 &= ~(INT_PROC_ENBL | INIT_ENB);
 		pci_write_config_dword(pci_dev, GEN_CNTL_0, gen_cntl_0);
 
-		tasklet_disable(&he_dev->tasklet);
+		tasklet_kill(&he_dev->tasklet);
 
 		/* disable recv and transmit */
 
-- 
1.7.9.5