[PATCH V3 1/4] mfd: tps65910: Initialize mfd devices after all initialization done

[Laxman Dewangan <ldewangan@nvidia.com>]

Add sub devices of tps65910 after all initialization like interrupt,
clock etc. is done. This will make sure that require data gets
initialized properly before sub devices probe's get called.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
Changes from V:
- Rearrange patches so that this patch become first in place of third of
  series.
- Added Reviewed by: Mark as it is already revieved in patch V1.

Changes from V2:
- None.

 drivers/mfd/tps65910.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 0d79ce2..27fbbe5 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -279,14 +279,6 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	ret = mfd_add_devices(tps65910->dev, -1,
-			      tps65910s, ARRAY_SIZE(tps65910s),
-			      NULL, 0, NULL);
-	if (ret < 0) {
-		dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
-		return ret;
-	}
-
 	init_data->irq = pmic_plat_data->irq;
 	init_data->irq_base = pmic_plat_data->irq_base;
 
@@ -299,6 +291,14 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 		pm_power_off = tps65910_power_off;
 	}
 
+	ret = mfd_add_devices(tps65910->dev, -1,
+			      tps65910s, ARRAY_SIZE(tps65910s),
+			      NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
+		return ret;
+	}
+
 	return ret;
 }
 
-- 
1.7.1.1