From: dragos.tatulea@intel.com
To: linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, cjb@laptop.org
Cc: kirill.shutemov@linux.intel.com, irina.tirdea@intel.com,
octavian.purdila@intel.com, tony.luck@intel.com,
keescook@chromium.org, dragos.tatulea@gmail.com,
Adrian Hunter <adrian.hunter@intel.com>
Subject: [PATCH v2 22/26] mmc: sdhci: panic write: no dma mapping
Date: Thu, 8 Nov 2012 15:06:20 +0200 [thread overview]
Message-ID: <1352379984-18381-23-git-send-email-dragos.tatulea@intel.com> (raw)
In-Reply-To: <1352379984-18381-1-git-send-email-dragos.tatulea@intel.com>
From: Adrian Hunter <adrian.hunter@intel.com>
Implement simple dma ops to avoid usage dma mapping in panic mode.
Init & cleanup pave the way for the dma ops implemented through
pre and post functions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
---
drivers/mmc/host/sdhci.c | 158 ++++++++++++++++++++++++++++++++++++++++++++-
include/linux/mmc/sdhci.h | 8 +++
2 files changed, 164 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d85e9d5..ab3f5ce 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -649,6 +649,69 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
data->sg_len, direction);
}
+#ifdef CONFIG_MMC_BLOCK_PANIC_WRITE
+
+static void sdhci_panic_dma_pre(struct sdhci_host *host, struct mmc_data *data)
+{
+ struct scatterlist *sg;
+ int i, len;
+ dma_addr_t addr;
+ u8 *desc;
+
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (data->sg_len != 1) {
+ WARN_ON(1);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ return;
+ }
+ desc = host->panic_adma_desc;
+ for_each_sg(data->sg, sg, 1, i) {
+ addr = host->panic_dma_addr;
+ len = sg->length;
+ sdhci_set_adma_desc(desc, addr, len, 0x21);
+ desc += 8;
+ }
+ if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
+ if (desc != host->panic_adma_desc) {
+ desc -= 8;
+ desc[0] |= 0x2;
+ }
+ } else {
+ sdhci_set_adma_desc(desc, 0, 0, 0x3);
+ }
+ sdhci_writel(host, host->panic_adma_addr, SDHCI_ADMA_ADDRESS);
+ } else {
+ sdhci_writel(host, host->panic_dma_addr, SDHCI_DMA_ADDRESS);
+ }
+
+ if (data->flags & MMC_DATA_WRITE) {
+ sg_copy_to_buffer(data->sg, data->sg_len, host->panic_buf,
+ host->panic_bufsize);
+ }
+}
+
+static void sdhci_panic_dma_post(struct sdhci_host *host, struct mmc_data *data)
+{
+ if (data->flags & MMC_DATA_READ) {
+ sg_copy_from_buffer(data->sg, data->sg_len, host->panic_buf,
+ host->panic_bufsize);
+ }
+}
+
+#else
+
+static inline void sdhci_panic_dma_pre(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+}
+
+static inline void sdhci_panic_dma_post(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+}
+
+#endif
+
static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
{
u8 count;
@@ -810,7 +873,9 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
}
if (host->flags & SDHCI_REQ_USE_DMA) {
- if (host->flags & SDHCI_USE_ADMA) {
+ if (mmc_am_panic_task(host->mmc)) {
+ sdhci_panic_dma_pre(host, data);
+ } else if (host->flags & SDHCI_USE_ADMA) {
ret = sdhci_adma_table_pre(host, data);
if (ret) {
/*
@@ -937,7 +1002,9 @@ static void sdhci_finish_data(struct sdhci_host *host)
host->data = NULL;
if (host->flags & SDHCI_REQ_USE_DMA) {
- if (host->flags & SDHCI_USE_ADMA)
+ if (mmc_am_panic_task(host->mmc))
+ sdhci_panic_dma_post(host, data);
+ else if (host->flags & SDHCI_USE_ADMA)
sdhci_adma_table_post(host, data);
else {
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
@@ -2045,6 +2112,91 @@ static const struct mmc_host_ops sdhci_ops = {
#ifdef CONFIG_MMC_BLOCK_PANIC_WRITE
+/*
+ * Arbitrary maximum DMA buffer size and hence maximum request size when using
+ * DMA.
+ */
+#define SDHCI_PANIC_DMA_BUFSIZE (32 * 1024)
+
+/*
+ * We DMA at most one segment which is aligned. Plus we need an end descriptor.
+ * We allow for a 8 byte (32-bit address) descriptor size.
+ */
+#define SDHCI_PANIC_ADMA_DESC_SZ ((1 + 1) * 12)
+
+static void sdhci_panic_dma_cleanup(struct sdhci_host *host)
+{
+ if (host->panic_adma_desc) {
+ dma_free_coherent(mmc_dev(host->mmc), SDHCI_PANIC_ADMA_DESC_SZ,
+ host->panic_adma_desc, host->panic_adma_addr);
+ host->panic_adma_desc = NULL;
+ }
+
+ if (host->panic_buf) {
+ dma_free_coherent(mmc_dev(host->mmc), host->panic_bufsize,
+ host->panic_buf, host->panic_dma_addr);
+ host->panic_buf = NULL;
+ }
+}
+
+static int sdhci_panic_dma_init(struct sdhci_host *host)
+{
+ size_t size;
+
+ size = min_t(size_t, SDHCI_PANIC_DMA_BUFSIZE, host->mmc->max_seg_size);
+ while (size > PAGE_SIZE) {
+ host->panic_buf = dma_alloc_coherent(mmc_dev(host->mmc), size,
+ &host->panic_dma_addr,
+ GFP_KERNEL | __GFP_NOWARN);
+ if (host->panic_buf)
+ break;
+ size >>= 1;
+ }
+ if (!host->panic_buf) {
+ host->panic_buf = dma_alloc_coherent(mmc_dev(host->mmc), size,
+ &host->panic_dma_addr,
+ GFP_KERNEL);
+ }
+ if (!host->panic_buf)
+ return -ENOMEM;
+
+ host->panic_bufsize = size;
+ host->mmc->panic_max_size = size;
+
+ if (host->flags & SDHCI_USE_ADMA) {
+ size = SDHCI_PANIC_ADMA_DESC_SZ;
+ host->panic_adma_desc = dma_alloc_coherent(mmc_dev(host->mmc),
+ size,
+ &host->panic_adma_addr,
+ GFP_KERNEL);
+ if (!host->panic_adma_desc) {
+ sdhci_panic_dma_cleanup(host);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+static int sdhci_panic_init(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ mmc->panic_max_size = mmc->max_seg_size;
+
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
+ return sdhci_panic_dma_init(host);
+
+ return 0;
+}
+
+static void sdhci_panic_cleanup(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ sdhci_panic_dma_cleanup(host);
+}
+
void sdhci_lock(struct sdhci_host *host)
{
if (mmc_am_panic_task(host->mmc))
@@ -2092,6 +2244,8 @@ static void sdhci_panic_end(struct mmc_host *mmc)
}
static const struct mmc_panic_ops sdhci_pops = {
+ .init = sdhci_panic_init,
+ .cleanup = sdhci_panic_cleanup,
.begin = sdhci_panic_begin,
.end = sdhci_panic_end,
};
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index fa8529a..873e41d 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -172,6 +172,14 @@ struct sdhci_host {
#define SDHCI_TUNING_MODE_1 0
struct timer_list tuning_timer; /* Timer for tuning */
+#ifdef CONFIG_MMC_BLOCK_PANIC_WRITE
+ void *panic_buf; /* buffer for panic requests */
+ size_t panic_bufsize; /* panic buffer size */
+ dma_addr_t panic_dma_addr; /* panic buffer dma address */
+ u8 *panic_adma_desc; /* adma desc buffer */
+ dma_addr_t panic_adma_addr; /* adma desc address */
+#endif
+
unsigned long private[0] ____cacheline_aligned;
};
#endif /* LINUX_MMC_SDHCI_H */
--
1.7.9.5
next prev parent reply other threads:[~2012-11-08 13:04 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-08 13:05 [PATCH v2 00/26] pstore, mmc: add mmc as backend for pstore dragos.tatulea
2012-11-08 13:05 ` [PATCH v2 01/26] pstore: allow for big files dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 02/26] pstore: add flags dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 03/26] pstore: add flush dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 04/26] blkoops: add a block device oops / panic logger dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 05/26] block: add panic write dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 06/26] mmc: block: add panic write support dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 07/26] mmc: panic write: bypass host claiming dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 08/26] mmc: panic write: bypass request completion dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 09/26] mmc: panic write: suppress host not claimed warnings dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 10/26] mmc: panic write: do not msleep dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 11/26] mmc: panic write: bypass clock gating dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 12/26] mmc: panic write: bypass regulators dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 13/26] mmc: panic write: trap non panic tasks dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 14/26] mmc: panic write: bypass bus ref locking dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 15/26] mmc: sdhci: panic write: bypass spin lock dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 16/26] mmc: sdhci: panic write: no sleeping dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 17/26] mmc: sdhci: panic write: call tasklets inline dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 18/26] mmc: sdhci: panic write: no timeout timer dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 19/26] mmc: sdhci: panic write: no runtime pm dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 20/26] mmc: sdhci: panic write: no tuning dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 21/26] mmc: sdhci: panic write: poll interrupts dragos.tatulea
2012-11-08 13:06 ` dragos.tatulea [this message]
2012-11-08 13:06 ` [PATCH v2 23/26] mmc: sdhci: panic write: resume suspended host dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 24/26] mmc: sdhci: panic write: abort request in progress dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 25/26] mmc: sdhci: panic write: trap nonpanic tasks dragos.tatulea
2012-11-08 13:06 ` [PATCH v2 26/26] mmc: sdhci-pci: add panic write support dragos.tatulea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352379984-18381-23-git-send-email-dragos.tatulea@intel.com \
--to=dragos.tatulea@intel.com \
--cc=adrian.hunter@intel.com \
--cc=cjb@laptop.org \
--cc=dragos.tatulea@gmail.com \
--cc=irina.tirdea@intel.com \
--cc=keescook@chromium.org \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=octavian.purdila@intel.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®