From: ciminaghi@gnudd.com
To: sameo@linux.intel.com, rubini@gnudd.com,
giancarlo.asnaghi@st.com, broonie@opensource.wolfsonmicro.com
Cc: linux-kernel@vger.kernel.org, Davide Ciminaghi <ciminaghi@gnudd.com>
Subject: [PATCH 03/10] drivers/mfd/sta2x11-mfd: add sta2x11_mfd_get_regs_data() function
Date: Fri, 9 Nov 2012 15:19:54 +0100 [thread overview]
Message-ID: <1352470801-2418-4-git-send-email-ciminaghi@gnudd.com> (raw)
In-Reply-To: <1352470801-2418-1-git-send-email-ciminaghi@gnudd.com>
From: Davide Ciminaghi <ciminaghi@gnudd.com>
A couple of predefined clocks (mux and gated) need to be
initialized with the virtual address of the clock's controlling
register and the address of a spinlock used to protect against
races.
This function exports such data for all the mfd cells.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
---
drivers/mfd/sta2x11-mfd.c | 22 ++++++++++++++++++++++
include/linux/mfd/sta2x11-mfd.h | 5 +++++
2 files changed, 27 insertions(+)
diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c
index 0cac201..6d12ab4 100644
--- a/drivers/mfd/sta2x11-mfd.c
+++ b/drivers/mfd/sta2x11-mfd.c
@@ -135,6 +135,28 @@ u32 __sta2x11_mfd_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val,
}
EXPORT_SYMBOL(__sta2x11_mfd_mask);
+int sta2x11_mfd_get_regs_data(struct platform_device *dev,
+ enum sta2x11_mfd_plat_dev index,
+ void __iomem **regs,
+ spinlock_t **lock)
+{
+ struct pci_dev *pdev = *(struct pci_dev **)(dev->dev.platform_data);
+ struct sta2x11_mfd *mfd;
+
+ if (!pdev)
+ return -ENODEV;
+ mfd = sta2x11_mfd_find(pdev);
+ if (!mfd)
+ return -ENODEV;
+ if (index >= sta2x11_n_mfd_plat_devs)
+ return -ENODEV;
+ *regs = mfd->regs[index];
+ *lock = &mfd->lock[index];
+ pr_debug("%s %d *regs = %p\n", __func__, __LINE__, *regs);
+ return *regs ? 0 : -ENODEV;
+}
+EXPORT_SYMBOL(sta2x11_mfd_get_regs_data);
+
/*
* Special sta2x11-mfd regmap lock/unlock functions
*/
diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h
index 8334430..e813e5e 100644
--- a/include/linux/mfd/sta2x11-mfd.h
+++ b/include/linux/mfd/sta2x11-mfd.h
@@ -474,4 +474,9 @@ u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
#define COMPENSATION_REG3 0x3cc
#define TEST_CTL_REG 0x3d0
+extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev,
+ enum sta2x11_mfd_plat_dev index,
+ void __iomem **regs,
+ spinlock_t **lock);
+
#endif /* __STA2X11_MFD_H */
--
1.7.10.4
next prev parent reply other threads:[~2012-11-09 14:20 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-09 14:19 [PATCH v3 00/10] sta2x11-mfd patches ciminaghi
2012-11-09 14:19 ` [PATCH 01/10] drivers/mfd/sta2x11-mfd: add apb-soc regs driver and factor out common code ciminaghi
2012-11-09 14:19 ` [PATCH 02/10] drivers/mfd/sta2x11-mfd: add regmap support ciminaghi
2012-11-09 14:19 ` ciminaghi [this message]
2012-11-09 14:19 ` [PATCH 04/10] drivers/mfd/sta2x11-mfd: use defines for platform devices' names ciminaghi
2012-11-09 14:19 ` [PATCH 05/10] drivers/mfd/sta2x11-mfd: only add sta2x11_mfd if it hasn't already been added ciminaghi
2012-11-09 14:19 ` [PATCH 06/10] drivers/mfd/sta2x11-mfd: platform probe: don't mind about gpio platform data ciminaghi
2012-11-09 14:19 ` [PATCH 07/10] drivers/mfd/sta2x11-mfd: use one lock per device instead of one lock per mfd ciminaghi
2012-11-09 14:19 ` [PATCH 08/10] drivers/mfd/sta2x11-mfd: add scr (otp registers) platform driver ciminaghi
2012-11-09 14:20 ` [PATCH 09/10] drivers/mfd/sta2x11-mfd: add defines for some sta2x11 sctl registers ciminaghi
2012-11-09 14:20 ` [PATCH 10/10] drivers/mfd/sta2x11-mfd: add myself to copyright ciminaghi
2012-11-19 17:58 ` [PATCH v3 00/10] sta2x11-mfd patches Samuel Ortiz
2012-11-19 18:44 ` Samuel Ortiz
2012-11-20 0:19 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2012-10-22 14:50 [PATCH v2 " ciminaghi
2012-10-22 14:50 ` [PATCH 03/10] drivers/mfd/sta2x11-mfd: add sta2x11_mfd_get_regs_data() function ciminaghi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352470801-2418-4-git-send-email-ciminaghi@gnudd.com \
--to=ciminaghi@gnudd.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=giancarlo.asnaghi@st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rubini@gnudd.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®