From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1767769Ab2KONO6 (ORCPT ); Thu, 15 Nov 2012 08:14:58 -0500 Received: from mail-wg0-f44.google.com ([74.125.82.44]:51856 "EHLO mail-wg0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1767726Ab2KONOz (ORCPT ); Thu, 15 Nov 2012 08:14:55 -0500 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: arnd@arndb.de, linus.walleij@stericsson.com, Lee Jones Subject: [PATCH 2/2] ARM: ux500: Move board specific GPIO info out to subordinate DTS files Date: Thu, 15 Nov 2012 13:14:48 +0000 Message-Id: <1352985288-29518-2-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1352985288-29518-1-git-send-email-lee.jones@linaro.org> References: <1352985288-29518-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org GPIO numbers for the newly created gpio-regulator will differ from board to board. Therefore it's not sensible to leave this information in the top level DTSI file. Let's move them out to the DTS files where they can correctly vary. Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 2 -- arch/arm/boot/dts/hrefprev60.dts | 7 +++++++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index d8ba489..9f55363 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -638,8 +638,6 @@ regulator-name = "mmci-reg"; regulator-type = "voltage"; - gpios = <&tc3589x_gpio 18 0x4>; - gpio-enable = <&tc3589x_gpio 17 0x4>; states = <1800000 0x1 2900000 0x0>; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts index b398946..eec29c4 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -37,5 +37,12 @@ reset-gpio = <&tc3589x_gpio 13 0x4>; }; }; + + vmmci: regulator-gpio { + gpios = <&tc3589x_gpio 18 0x4>; + gpio-enable = <&tc3589x_gpio 17 0x4>; + + status = "okay"; + }; }; }; -- 1.7.9.5