From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1768674Ab2KOSWL (ORCPT ); Thu, 15 Nov 2012 13:22:11 -0500 Received: from 81-89-104-214.blue.kundencontroller.de ([81.89.104.214]:35955 "EHLO tomweber.eu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1768375Ab2KOSWJ (ORCPT ); Thu, 15 Nov 2012 13:22:09 -0500 X-Greylist: delayed 569 seconds by postgrey-1.27 at vger.kernel.org; Thu, 15 Nov 2012 13:22:09 EST From: Thomas Weber To: Tony Lindgren (maintainer:OMAP SUPPORT) Cc: Thomas Weber , Russell King (maintainer:ARM PORT), linux-omap@vger.kernel.org (open list:OMAP SUPPORT), linux-arm-kernel@lists.infradead.org (moderated list:ARM SUB-ARCHITECT...), linux-kernel@vger.kernel.org (open list) Subject: [PATCH] ARM: OMAP3: Devkit8000: Add DDC i2c_bus_num Date: Thu, 15 Nov 2012 19:12:03 +0100 Message-Id: <1353003123-7335-1-git-send-email-thomas@tomweber.eu> X-Mailer: git-send-email 1.8.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add i2c bus number for DVI output. The driver uses this to detect if a panel is connected and to read EDID. Signed-off-by: Thomas Weber --- arch/arm/mach-omap2/board-devkit8000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1fd161e..6f04f0f 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -139,6 +139,7 @@ static struct omap_dss_device devkit8000_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = 1, }; static struct omap_dss_device devkit8000_dvi_device = { -- 1.8.0