From: Prabhakar Lad <prabhakar.csengg@gmail.com>
To: LMML <linux-media@vger.kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
DLOS <davinci-linux-open-source@linux.davincidsp.com>,
Manjunath Hadli <manjunath.hadli@ti.com>,
Prabhakar Lad <prabhakar.lad@ti.com>,
Mauro Carvalho Chehab <mchehab@infradead.org>,
Rob Landley <rob@landley.net>, <linux-doc@vger.kernel.org>
Subject: [PATCH v2 12/12] davinci: vpfe: Add documentation
Date: Fri, 16 Nov 2012 20:15:14 +0530 [thread overview]
Message-ID: <1353077114-19296-13-git-send-email-prabhakar.lad@ti.com> (raw)
In-Reply-To: <1353077114-19296-1-git-send-email-prabhakar.lad@ti.com>
From: Manjunath Hadli <manjunath.hadli@ti.com>
Add documentation on the Davinci VPFE driver. Document the subdevs,
and private IOTCLs the driver implements.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: Rob Landley <rob@landley.net>
Cc: <linux-doc@vger.kernel.org>
---
Documentation/video4linux/davinci-vpfe-mc.txt | 154 +++++++++++++++++++++++++
1 files changed, 154 insertions(+), 0 deletions(-)
create mode 100644 Documentation/video4linux/davinci-vpfe-mc.txt
diff --git a/Documentation/video4linux/davinci-vpfe-mc.txt b/Documentation/video4linux/davinci-vpfe-mc.txt
new file mode 100644
index 0000000..1dbd564
--- /dev/null
+++ b/Documentation/video4linux/davinci-vpfe-mc.txt
@@ -0,0 +1,154 @@
+Davinci Video processing Front End (VPFE) driver
+
+Copyright (C) 2012 Texas Instruments Inc
+
+Contacts: Manjunath Hadli <manjunath.hadli@ti.com>
+ Prabhakar Lad <prabhakar.lad@ti.com>
+
+
+Introduction
+============
+
+This file documents the Texas Instruments Davinci Video processing Front End
+(VPFE) driver located under drivers/media/platform/davinci. The original driver
+exists for Davinci VPFE, which is now being changed to Media Controller
+Framework.
+
+Currently the driver has been successfully used on the following
+version of Davinci:
+
+ DM365/DM368
+
+The driver implements V4L2, Media controller and v4l2_subdev interfaces. Sensor,
+lens and flash drivers using the v4l2_subdev interface in the kernel are
+supported.
+
+
+Split to subdevs
+================
+
+The Davinci VPFE is split into V4L2 subdevs, each of the blocks inside the VPFE
+having one subdev to represent it. Each of the subdevs provide a V4L2 subdev
+interface to userspace.
+
+ DAVINCI ISIF
+ DAVINCI IPIPEIF
+ DAVINCI IPIPE
+ DAVINCI CROP RESIZER
+ DAVINCI RESIZER A
+ DAVINCI RESIZER B
+
+Each possible link in the VPFE is modeled by a link in the Media controller
+interface. For an example program see [1].
+
+
+ISIF, IPIPE, and RESIZER block IOCTLs
+======================================
+
+The Davinci Video processing Front End (VPFE) driver supports standard V4L2
+IOCTLs and controls where possible and practical. Much of the functions provided
+by the VPFE, however, does not fall under the standard IOCTL's.
+
+In general, there is a private ioctl for configuring each of the blocks
+containing hardware-dependent functions.
+
+The following private IOCTLs are supported:
+
+ VIDIOC_VPFE_ISIF_[S/G]_RAW_PARAMS
+ VIDIOC_VPFE_IPIPE_[S/G]_CONFIG
+ VIDIOC_VPFE_RSZ_[S/G]_CONFIG
+
+The parameter structures used by these ioctl's are described in
+include/uapi/linux/davinci_vpfe.h.
+
+The VIDIOC_VPFE_ISIF_S_RAW_PARAMS, VIDIOC_VPFE_IPIPE_S_CONFIG and
+VIDIOC_VPFE_RSZ_S_CONFIG are used to configure, enable and disable functions in
+the isif, ipipe and resizer blocks respectively. These IOCTL's control several
+functions in the blocks they control. VIDIOC_VPFE_ISIF_S_RAW_PARAMS IOCTL
+accepts a pointer to struct vpfe_isif_raw_config as its argument. Similarly
+VIDIOC_VPFE_IPIPE_S_CONFIG accepts a pointer to struct vpfe_ipipe_config. And
+VIDIOC_VPFE_RSZ_S_CONFIG accepts a pointer to struct vpfe_rsz_config as its
+argument. Similarly VIDIOC_VPFE_ISIF_G_RAW_PARAMS, VIDIOC_VPFE_IPIPE_G_CONFIG
+and VIDIOC_VPFE_RSZ_G_CONFIG are used to get the current configuration set in
+the isif, ipipe and resizer blocks respectively.
+
+The detailed functions of the VPFE itself related to a given VPFE block is
+described in the Technical Reference Manuals (TRMs) --- see the end of the
+document for those.
+
+
+IPIPEIF block IOCTLs
+======================================
+
+The following private IOCTLs are supported:
+
+ VIDIOC_VPFE_IPIPEIF_[S/G]_CONFIG
+
+The parameter structures used by these ioctl's are described in
+include/uapi/linux/dm365_ipipeif.h
+
+The VIDIOC_VPFE_IPIPEIF_S_CONFIG is used to configure the ipipeif
+hardware block. The VIDIOC_VPFE_IPIPEIF_S_CONFIG and
+VIDIOC_VPFE_IPIPEIF_G_CONFIG accepts a pointer to struct ipipeif_params
+as its argument.
+
+
+VPFE Operating Modes
+==========================================
+
+a: Continuous Modes
+------------------------
+
+1: tvp514x/tvp7002/mt9p031---> DAVINCI ISIF---> SDRAM
+
+2: tvp514x/tvp7002/mt9p031---> DAVINCI ISIF---> DAVINCI IPIPEIF--->|
+ |
+ <--------------------<----------------<---------------------<---|
+ |
+ V
+ DAVINCI CROP RESIZER--->DAVINCI RESIZER [A/B]---> SDRAM
+
+3: tvp514x/tvp7002/mt9p031---> DAVINCI ISIF---> DAVINCI IPIPEIF--->|
+ |
+ <--------------------<----------------<---------------------<---|
+ |
+ V
+ DAVINCI IPIPE---> DAVINCI CROP RESIZER--->DAVINCI RESIZER [A/B]---> SDRAM
+
+a: Single Shot Modes
+------------------------
+
+1: SDRAM---> DAVINCI IPIPEIF---> DAVINCI IPIPE---> DAVINCI CROP RESIZER--->|
+ |
+ <----------------<----------------<------------------<---------------<--|
+ |
+ V
+DAVINCI RESIZER [A/B]---> SDRAM
+
+2: SDRAM---> DAVINCI IPIPEIF---> DAVINCI CROP RESIZER--->|
+ |
+ <----------------<----------------<---------------<---|
+ |
+ V
+DAVINCI RESIZER [A/B]---> SDRAM
+
+
+Technical reference manuals (TRMs) and other documentation
+==========================================================
+
+Davinci DM365 TRM:
+<URL:http://www.ti.com/lit/ds/sprs457e/sprs457e.pdf>
+Referenced MARCH 2009-REVISED JUNE 2011
+
+Davinci DM368 TRM:
+<URL:http://www.ti.com/lit/ds/sprs668c/sprs668c.pdf>
+Referenced APRIL 2010-REVISED JUNE 2011
+
+Davinci Video Processing Front End (VPFE) DM36x
+<URL:http://www.ti.com/lit/ug/sprufg8c/sprufg8c.pdf>
+
+
+References
+==========
+
+[1] http://git.ideasonboard.org/?p=media-ctl.git;a=summary
--
1.7.4.1
next prev parent reply other threads:[~2012-11-16 14:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-16 14:45 [PATCH v2 00/12] Media Controller capture driver for DM365 Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 01/12] davinci: vpfe: add v4l2 capture driver with media interface Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 02/12] davinci: vpfe: add v4l2 video driver support Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 03/12] davinci: vpfe: dm365: add IPIPEIF driver based on media framework Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 04/12] davinci: vpfe: dm365: add ISIF " Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 05/12] davinci: vpfe: dm365: add IPIPE support for media controller driver Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 06/12] davinci: vpfe: dm365: add IPIPE hardware layer support Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 07/12] davinci: vpfe: dm365: resizer driver based on media framework Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 08/12] davinci: vpss: dm365: enable ISP registers Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 09/12] davinci: vpss: dm365: set vpss clk ctrl Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 10/12] davinci: vpss: dm365: add vpss helper functions to be used in the main driver for setting hardware parameters Prabhakar Lad
2012-11-16 14:45 ` [PATCH v2 11/12] davinci: vpfe: dm365: add build infrastructure for capture driver Prabhakar Lad
2012-11-16 14:45 ` Prabhakar Lad [this message]
2012-11-16 14:53 ` [PATCH v2 00/12] Media Controller capture driver for DM365 Prabhakar Lad
2012-11-21 20:56 ` Sakari Ailus
2012-11-22 23:53 ` Sakari Ailus
2012-11-23 13:13 ` Sakari Ailus
2012-11-23 13:21 ` Prabhakar Lad
2012-11-23 13:57 ` Sakari Ailus
2012-11-23 14:01 ` Hans Verkuil
2012-11-25 16:27 ` Prabhakar Lad
2012-11-26 0:28 ` Sakari Ailus
2012-11-26 3:55 ` Prabhakar Lad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353077114-19296-13-git-send-email-prabhakar.lad@ti.com \
--to=prabhakar.csengg@gmail.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=manjunath.hadli@ti.com \
--cc=mchehab@infradead.org \
--cc=prabhakar.lad@ti.com \
--cc=rob@landley.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®