mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Qing Xu <qingx@marvell.com>
To: qingx@marvell.com, sameo@linux.intel.com,
	haojian.zhuang@gmail.com, grant.likely@secretlab.ca,
	rob.herring@calxeda.com, zhouqiao@marvell.com, cxie4@marvell.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH] mfd: 88pm80x: add dt support
Date: Wed,  5 Dec 2012 10:23:16 +0800	[thread overview]
Message-ID: <1354674196-1998-1-git-send-email-qingx@marvell.com> (raw)

From: Qing Xu <qingx@marvell.com>

add dt support for 88pm800 and 88pm805

Signed-off-by: Qing Xu <qingx@marvell.com>
---
 drivers/mfd/88pm800.c       |   26 +++++++++++++++++++++++---
 drivers/mfd/88pm805.c       |   26 +++++++++++++++++++++++---
 drivers/mfd/88pm80x.c       |   32 ++++++++++++++++++++++++++++++++
 include/linux/mfd/88pm80x.h |    3 +++
 4 files changed, 81 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 3fcc8dd..20b67d7 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -506,6 +506,22 @@ static int __devinit pm800_probe(struct i2c_client *client,
 	struct pm80x_chip *chip;
 	struct pm80x_platform_data *pdata = client->dev.platform_data;
 	struct pm80x_subchip *subchip;
+	struct device_node *node = client->dev.of_node;
+
+	if (node && !pdata) {
+		/* parse DT to get platform data */
+		pdata = devm_kzalloc(&client->dev,
+				     sizeof(struct pm80x_platform_data),
+				     GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+		ret = pm80x_dt_init(node, &client->dev, pdata);
+		if (ret)
+			return -EINVAL;
+	} else if (!pdata) {
+		pr_info("No platform data in %s!\n", __func__);
+		return -EINVAL;
+	}
 
 	ret = pm80x_init(client, id);
 	if (ret) {
@@ -540,9 +556,6 @@ static int __devinit pm800_probe(struct i2c_client *client,
 		goto err_800_init;
 	}
 
-	if (pdata->plat_config)
-		pdata->plat_config(chip, pdata);
-
 	return 0;
 
 err_800_init:
@@ -570,11 +583,18 @@ static int __devexit pm800_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct of_device_id pm800_dt_ids[] = {
+	{ .compatible = "marvell,88pm800", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pm800_dt_ids);
+
 static struct i2c_driver pm800_driver = {
 	.driver = {
 		.name = "88PM800",
 		.owner = THIS_MODULE,
 		.pm = &pm80x_pm_ops,
+		.of_match_table	= of_match_ptr(pm800_dt_ids),
 		},
 	.probe = pm800_probe,
 	.remove = __devexit_p(pm800_remove),
diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c
index 39a91bd..b0fb3ff 100644
--- a/drivers/mfd/88pm805.c
+++ b/drivers/mfd/88pm805.c
@@ -239,6 +239,22 @@ static int __devinit pm805_probe(struct i2c_client *client,
 	int ret = 0;
 	struct pm80x_chip *chip;
 	struct pm80x_platform_data *pdata = client->dev.platform_data;
+	struct device_node *node = client->dev.of_node;
+
+	if (node && !pdata) {
+		/* parse DT to get platform data */
+		pdata = devm_kzalloc(&client->dev,
+				     sizeof(struct pm80x_platform_data),
+				     GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+		ret = pm80x_dt_init(node, &client->dev, pdata);
+		if (ret)
+			return -EINVAL;
+	} else if (!pdata) {
+		pr_info("No platform data in %s!\n", __func__);
+		return -EINVAL;
+	}
 
 	ret = pm80x_init(client, id);
 	if (ret) {
@@ -254,9 +270,6 @@ static int __devinit pm805_probe(struct i2c_client *client,
 		goto err_805_init;
 	}
 
-	if (pdata->plat_config)
-		pdata->plat_config(chip, pdata);
-
 	return 0;
 
 err_805_init:
@@ -277,11 +290,18 @@ static int __devexit pm805_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct of_device_id pm805_dt_ids[] = {
+	{ .compatible = "marvell,88pm805", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pm805_dt_ids);
+
 static struct i2c_driver pm805_driver = {
 	.driver = {
 		.name = "88PM805",
 		.owner = THIS_MODULE,
 		.pm = &pm80x_pm_ops,
+		.of_match_table	= of_match_ptr(pm805_dt_ids),
 		},
 	.probe = pm805_probe,
 	.remove = __devexit_p(pm805_remove),
diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c
index 1adb355..bd59202 100644
--- a/drivers/mfd/88pm80x.c
+++ b/drivers/mfd/88pm80x.c
@@ -111,6 +111,38 @@ int pm80x_deinit(struct i2c_client *client)
 }
 EXPORT_SYMBOL_GPL(pm80x_deinit);
 
+int pm80x_dt_init(struct device_node *np,
+				    struct device *dev,
+				    struct pm80x_platform_data *pdata)
+{
+	int ret;
+	ret = of_property_read_u32(np, "marvell,88pm80x-irqmode",
+				   &pdata->irq_mode);
+	if (ret) {
+		dev_err(dev, "Not found \"marvell,88pm80x-irqmode\" "
+			"property\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(np, "marvell,88pm80x-poweraddr",
+				   (u32*)(&pdata->power_page_addr));
+	if (ret) {
+		dev_err(dev, "Not found \"marvell,88pm80x-poweraddr\" "
+			"property\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(np, "marvell,88pm80x-gpadcaddr",
+				   (u32*)(&pdata->gpadc_page_addr));
+	if (ret) {
+		dev_err(dev, "Not found \"marvell,88pm80x-gpadcaddr\" "
+			"property\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pm80x_dt_init);
+
 #ifdef CONFIG_PM_SLEEP
 static int pm80x_suspend(struct device *dev)
 {
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 904efb9..153f492 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -367,4 +367,7 @@ static inline int pm80x_dev_resume(struct device *dev)
 extern int pm80x_init(struct i2c_client *client,
 			     const struct i2c_device_id *id) __devinit;
 extern int pm80x_deinit(struct i2c_client *client);
+extern int pm80x_dt_init(struct device_node *np,
+						struct device *dev,
+						struct pm80x_platform_data *pdata);
 #endif /* __LINUX_MFD_88PM80X_H */
-- 
1.7.0.4


             reply	other threads:[~2012-12-05  2:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-05  2:23 Qing Xu [this message]
2012-12-05  2:28 ` Haojian Zhuang
2012-12-05  5:43   ` Qing Xu
2012-12-06  1:55 Qing Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1354674196-1998-1-git-send-email-qingx@marvell.com \
    --to=qingx@marvell.com \
    --cc=cxie4@marvell.com \
    --cc=grant.likely@secretlab.ca \
    --cc=haojian.zhuang@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rob.herring@calxeda.com \
    --cc=sameo@linux.intel.com \
    --cc=zhouqiao@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®