From: Abhilash Kesavan <a.kesavan@samsung.com>
To: lrg@ti.com, broonie@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Cc: dianders@chromium.org, olof@lixom.net, grant.likely@secretlab.ca,
thomas.abraham@linaro.org, kgene.kim@samsung.com,
sameo@linux.intel.com, Abhilash Kesavan <a.kesavan@samsung.com>
Subject: [RFC PATCH 1/3] ARM: DTS: CROS5250: Add regulator operating mode bindings
Date: Mon, 10 Dec 2012 11:56:22 +0530 [thread overview]
Message-ID: <1355120784-31118-2-git-send-email-a.kesavan@samsung.com> (raw)
In-Reply-To: <1355120784-31118-1-git-send-email-a.kesavan@samsung.com>
Some of the LDOs and BUCKs on the MAX77686 PMIC can be put into a
low power or standby state. Add bindings to control the operating
mode. This results in significant power savings during suspend.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
---
arch/arm/boot/dts/cros5250-common.dtsi | 36 ++++++++++++++++++++++++++++++++
1 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index 98ff65b..10d1812 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -35,6 +35,8 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ /* Output ON/LPM controlled by PWRREQ */
+ max77686-opmode = <0x40>;
};
ldo2_reg: LDO2 {
@@ -42,6 +44,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x20>;
};
ldo3_reg: LDO3 {
@@ -49,6 +53,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ /* Output ON/LPM controlled by PWRREQ */
+ max77686-opmode = <0x80>;
};
ldo7_reg: LDO7 {
@@ -56,6 +62,8 @@
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x40>;
};
ldo8_reg: LDO8 {
@@ -63,6 +71,8 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x40>;
};
ldo10_reg: LDO10 {
@@ -70,6 +80,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x40>;
};
ldo12_reg: LDO12 {
@@ -77,6 +89,8 @@
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x40>;
};
ldo14_reg: LDO14 {
@@ -84,6 +98,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x40>;
};
ldo15_reg: LDO15 {
@@ -91,6 +107,8 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x40>;
};
ldo16_reg: LDO16 {
@@ -98,6 +116,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x40>;
};
buck1_reg: BUCK1 {
@@ -106,6 +126,8 @@
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x1>;
};
buck2_reg: BUCK2 {
@@ -114,6 +136,8 @@
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x10>;
};
buck3_reg: BUCK3 {
@@ -122,6 +146,8 @@
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x10>;
};
buck4_reg: BUCK4 {
@@ -130,6 +156,8 @@
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
+ /* Output ON/OFF controlled by PWRREQ */
+ max77686-opmode = <0x10>;
};
buck5_reg: BUCK5 {
@@ -138,6 +166,8 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+ /* Output ON */
+ max77686-opmode = <0x3>;
};
buck6_reg: BUCK6 {
@@ -145,6 +175,8 @@
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
+ /* Output ON */
+ max77686-opmode = <0x3>;
};
buck7_reg: BUCK7 {
@@ -152,6 +184,8 @@
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
+ /* Output ON */
+ max77686-opmode = <0x3>;
};
buck8_reg: BUCK8 {
@@ -159,6 +193,8 @@
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
+ /* Output OFF of ENB8 is low */
+ max77686-opmode = <0x1>;
};
};
};
--
1.7.8.6
next prev parent reply other threads:[~2012-12-10 6:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-10 6:26 [RFC PATCH 0/3] Add MAX77686 Operating mode support Abhilash Kesavan
2012-12-10 6:26 ` Abhilash Kesavan [this message]
2012-12-10 6:26 ` [RFC PATCH 2/3] regulator: max77686: Add support for various operating modes Abhilash Kesavan
2012-12-10 6:26 ` [RFC PATCH 3/3] dt: Document: Add optional MAX77686 operating mode bindings Abhilash Kesavan
2012-12-10 18:30 ` Doug Anderson
2012-12-12 3:07 ` Mark Brown
2012-12-10 6:46 ` [RFC PATCH 2/3] regulator: max77686: Add support for various operating modes Mark Brown
2012-12-10 8:19 ` Abhilash Kesavan
2012-12-10 8:36 ` Abhilash Kesavan
2012-12-11 12:57 ` Mark Brown
2012-12-12 2:58 ` Abhilash Kesavan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1355120784-31118-2-git-send-email-a.kesavan@samsung.com \
--to=a.kesavan@samsung.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dianders@chromium.org \
--cc=grant.likely@secretlab.ca \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=olof@lixom.net \
--cc=sameo@linux.intel.com \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®