From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753104Ab2LJI4b (ORCPT ); Mon, 10 Dec 2012 03:56:31 -0500 Received: from mail-wg0-f42.google.com ([74.125.82.42]:47497 "EHLO mail-wg0-f42.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752528Ab2LJI42 (ORCPT ); Mon, 10 Dec 2012 03:56:28 -0500 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: arnd@arndb.de, linus.walleij@stericsson.com, ulf.hansson@linaro.org, Lee Jones Subject: [PATCH 06/12] ARM: ux500: Set correct MMCI regulator voltages in the ux5x0 Device Tree Date: Mon, 10 Dec 2012 08:55:55 +0000 Message-Id: <1355129761-8088-7-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1355129761-8088-1-git-send-email-lee.jones@linaro.org> References: <1355129761-8088-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The voltages for the MMCI GPIO controlled voltage regulation differ depending on who you believe and where you pick the information up from. More recent internal code suggests that the true upper voltage from the shifter is actually v3.3, instead of the previously indicated v2.9. Let's mirror that change in the Device Tree file. Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 9f55363..bbea89a 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -634,12 +634,12 @@ compatible = "regulator-gpio"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; regulator-name = "mmci-reg"; regulator-type = "voltage"; states = <1800000 0x1 - 2900000 0x0>; + 3300000 0x0>; status = "disabled"; }; -- 1.7.9.5