[PATCH] dma: tegra: implement flags parameters for cyclic transfer

[Laxman Dewangan <ldewangan@nvidia.com>]

The flag parameter is added in the cyclic transfer request.
Use the flag option of:
- DMA_PREP_INTERRUPT for enabling interrupt.
- DMA_CTRL_ACK for deciding whether ack is requred or not for
  descriptor.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 drivers/dma/tegra20-apb-dma.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index efdfffa..bf58bb8 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -266,6 +266,7 @@ static struct tegra_dma_desc *tegra_dma_desc_get(
 		if (async_tx_test_ack(&dma_desc->txd)) {
 			list_del(&dma_desc->node);
 			spin_unlock_irqrestore(&tdc->lock, flags);
+			dma_desc->txd.flags = 0;
 			return dma_desc;
 		}
 	}
@@ -1050,7 +1051,9 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 					TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT;
 	ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
 
-	csr |= TEGRA_APBDMA_CSR_FLOW | TEGRA_APBDMA_CSR_IE_EOC;
+	csr |= TEGRA_APBDMA_CSR_FLOW;
+	if (flags & DMA_PREP_INTERRUPT)
+		csr |= TEGRA_APBDMA_CSR_IE_EOC;
 	csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
 
 	apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
@@ -1095,7 +1098,8 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 		mem += len;
 	}
 	sg_req->last_sg = true;
-	dma_desc->txd.flags = 0;
+	if (flags & DMA_CTRL_ACK)
+		dma_desc->txd.flags = DMA_CTRL_ACK;
 
 	/*
 	 * Make sure that mode should not be conflicting with currently
-- 
1.7.1.1