From: Tomas Winkler <tomas.winkler@intel.com>
To: gregkh@linuxfoundation.org
Cc: arnd@arndb.de, alan@linux.intel.com,
linux-kernel@vger.kernel.org,
Tomas Winkler <tomas.winkler@intel.com>
Subject: [RESEND char-misc-next 04/14] mei: extract device dependent constants into hw-me.h
Date: Tue, 25 Dec 2012 19:06:02 +0200 [thread overview]
Message-ID: <1356455172-31959-5-git-send-email-tomas.winkler@intel.com> (raw)
In-Reply-To: <1356455172-31959-1-git-send-email-tomas.winkler@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
drivers/misc/mei/hw-me.h | 167 ++++++++++++++++++++++++++++++++++++++++++++
drivers/misc/mei/hw.h | 98 --------------------------
drivers/misc/mei/mei_dev.h | 2 +
3 files changed, 169 insertions(+), 98 deletions(-)
create mode 100644 drivers/misc/mei/hw-me.h
diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h
new file mode 100644
index 0000000..a42b2a2
--- /dev/null
+++ b/drivers/misc/mei/hw-me.h
@@ -0,0 +1,167 @@
+/******************************************************************************
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Intel MEI Interface Header
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Corporation.
+ * linux-mei@linux.intel.com
+ * http://www.intel.com
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef _MEI_HW_MEI_H_
+#define _MEI_HW_MEI_H_
+
+/*
+ * MEI device IDs
+ */
+#define MEI_DEV_ID_82946GZ 0x2974 /* 82946GZ/GL */
+#define MEI_DEV_ID_82G35 0x2984 /* 82G35 Express */
+#define MEI_DEV_ID_82Q965 0x2994 /* 82Q963/Q965 */
+#define MEI_DEV_ID_82G965 0x29A4 /* 82P965/G965 */
+
+#define MEI_DEV_ID_82GM965 0x2A04 /* Mobile PM965/GM965 */
+#define MEI_DEV_ID_82GME965 0x2A14 /* Mobile GME965/GLE960 */
+
+#define MEI_DEV_ID_ICH9_82Q35 0x29B4 /* 82Q35 Express */
+#define MEI_DEV_ID_ICH9_82G33 0x29C4 /* 82G33/G31/P35/P31 Express */
+#define MEI_DEV_ID_ICH9_82Q33 0x29D4 /* 82Q33 Express */
+#define MEI_DEV_ID_ICH9_82X38 0x29E4 /* 82X38/X48 Express */
+#define MEI_DEV_ID_ICH9_3200 0x29F4 /* 3200/3210 Server */
+
+#define MEI_DEV_ID_ICH9_6 0x28B4 /* Bearlake */
+#define MEI_DEV_ID_ICH9_7 0x28C4 /* Bearlake */
+#define MEI_DEV_ID_ICH9_8 0x28D4 /* Bearlake */
+#define MEI_DEV_ID_ICH9_9 0x28E4 /* Bearlake */
+#define MEI_DEV_ID_ICH9_10 0x28F4 /* Bearlake */
+
+#define MEI_DEV_ID_ICH9M_1 0x2A44 /* Cantiga */
+#define MEI_DEV_ID_ICH9M_2 0x2A54 /* Cantiga */
+#define MEI_DEV_ID_ICH9M_3 0x2A64 /* Cantiga */
+#define MEI_DEV_ID_ICH9M_4 0x2A74 /* Cantiga */
+
+#define MEI_DEV_ID_ICH10_1 0x2E04 /* Eaglelake */
+#define MEI_DEV_ID_ICH10_2 0x2E14 /* Eaglelake */
+#define MEI_DEV_ID_ICH10_3 0x2E24 /* Eaglelake */
+#define MEI_DEV_ID_ICH10_4 0x2E34 /* Eaglelake */
+
+#define MEI_DEV_ID_IBXPK_1 0x3B64 /* Calpella */
+#define MEI_DEV_ID_IBXPK_2 0x3B65 /* Calpella */
+
+#define MEI_DEV_ID_CPT_1 0x1C3A /* Couger Point */
+#define MEI_DEV_ID_PBG_1 0x1D3A /* C600/X79 Patsburg */
+
+#define MEI_DEV_ID_PPT_1 0x1E3A /* Panther Point */
+#define MEI_DEV_ID_PPT_2 0x1CBA /* Panther Point */
+#define MEI_DEV_ID_PPT_3 0x1DBA /* Panther Point */
+
+#define MEI_DEV_ID_LPT 0x8C3A /* Lynx Point */
+#define MEI_DEV_ID_LPT_LP 0x9C3A /* Lynx Point LP */
+/*
+ * MEI HW Section
+ */
+
+/* MEI registers */
+/* H_CB_WW - Host Circular Buffer (CB) Write Window register */
+#define H_CB_WW 0
+/* H_CSR - Host Control Status register */
+#define H_CSR 4
+/* ME_CB_RW - ME Circular Buffer Read Window register (read only) */
+#define ME_CB_RW 8
+/* ME_CSR_HA - ME Control Status Host Access register (read only) */
+#define ME_CSR_HA 0xC
+
+
+/* register bits of H_CSR (Host Control Status register) */
+/* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */
+#define H_CBD 0xFF000000
+/* Host Circular Buffer Write Pointer */
+#define H_CBWP 0x00FF0000
+/* Host Circular Buffer Read Pointer */
+#define H_CBRP 0x0000FF00
+/* Host Reset */
+#define H_RST 0x00000010
+/* Host Ready */
+#define H_RDY 0x00000008
+/* Host Interrupt Generate */
+#define H_IG 0x00000004
+/* Host Interrupt Status */
+#define H_IS 0x00000002
+/* Host Interrupt Enable */
+#define H_IE 0x00000001
+
+
+/* register bits of ME_CSR_HA (ME Control Status Host Access register) */
+/* ME CB (Circular Buffer) Depth HRA (Host Read Access) - host read only
+access to ME_CBD */
+#define ME_CBD_HRA 0xFF000000
+/* ME CB Write Pointer HRA - host read only access to ME_CBWP */
+#define ME_CBWP_HRA 0x00FF0000
+/* ME CB Read Pointer HRA - host read only access to ME_CBRP */
+#define ME_CBRP_HRA 0x0000FF00
+/* ME Reset HRA - host read only access to ME_RST */
+#define ME_RST_HRA 0x00000010
+/* ME Ready HRA - host read only access to ME_RDY */
+#define ME_RDY_HRA 0x00000008
+/* ME Interrupt Generate HRA - host read only access to ME_IG */
+#define ME_IG_HRA 0x00000004
+/* ME Interrupt Status HRA - host read only access to ME_IS */
+#define ME_IS_HRA 0x00000002
+/* ME Interrupt Enable HRA - host read only access to ME_IE */
+#define ME_IE_HRA 0x00000001
+
+#endif /* _MEI_HW_MEI_H_ */
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index 7d47366..ba7d06c 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -33,104 +33,6 @@
/*
- * MEI device IDs
- */
-#define MEI_DEV_ID_82946GZ 0x2974 /* 82946GZ/GL */
-#define MEI_DEV_ID_82G35 0x2984 /* 82G35 Express */
-#define MEI_DEV_ID_82Q965 0x2994 /* 82Q963/Q965 */
-#define MEI_DEV_ID_82G965 0x29A4 /* 82P965/G965 */
-
-#define MEI_DEV_ID_82GM965 0x2A04 /* Mobile PM965/GM965 */
-#define MEI_DEV_ID_82GME965 0x2A14 /* Mobile GME965/GLE960 */
-
-#define MEI_DEV_ID_ICH9_82Q35 0x29B4 /* 82Q35 Express */
-#define MEI_DEV_ID_ICH9_82G33 0x29C4 /* 82G33/G31/P35/P31 Express */
-#define MEI_DEV_ID_ICH9_82Q33 0x29D4 /* 82Q33 Express */
-#define MEI_DEV_ID_ICH9_82X38 0x29E4 /* 82X38/X48 Express */
-#define MEI_DEV_ID_ICH9_3200 0x29F4 /* 3200/3210 Server */
-
-#define MEI_DEV_ID_ICH9_6 0x28B4 /* Bearlake */
-#define MEI_DEV_ID_ICH9_7 0x28C4 /* Bearlake */
-#define MEI_DEV_ID_ICH9_8 0x28D4 /* Bearlake */
-#define MEI_DEV_ID_ICH9_9 0x28E4 /* Bearlake */
-#define MEI_DEV_ID_ICH9_10 0x28F4 /* Bearlake */
-
-#define MEI_DEV_ID_ICH9M_1 0x2A44 /* Cantiga */
-#define MEI_DEV_ID_ICH9M_2 0x2A54 /* Cantiga */
-#define MEI_DEV_ID_ICH9M_3 0x2A64 /* Cantiga */
-#define MEI_DEV_ID_ICH9M_4 0x2A74 /* Cantiga */
-
-#define MEI_DEV_ID_ICH10_1 0x2E04 /* Eaglelake */
-#define MEI_DEV_ID_ICH10_2 0x2E14 /* Eaglelake */
-#define MEI_DEV_ID_ICH10_3 0x2E24 /* Eaglelake */
-#define MEI_DEV_ID_ICH10_4 0x2E34 /* Eaglelake */
-
-#define MEI_DEV_ID_IBXPK_1 0x3B64 /* Calpella */
-#define MEI_DEV_ID_IBXPK_2 0x3B65 /* Calpella */
-
-#define MEI_DEV_ID_CPT_1 0x1C3A /* Couger Point */
-#define MEI_DEV_ID_PBG_1 0x1D3A /* C600/X79 Patsburg */
-
-#define MEI_DEV_ID_PPT_1 0x1E3A /* Panther Point */
-#define MEI_DEV_ID_PPT_2 0x1CBA /* Panther Point */
-#define MEI_DEV_ID_PPT_3 0x1DBA /* Panther Point */
-
-#define MEI_DEV_ID_LPT 0x8C3A /* Lynx Point */
-#define MEI_DEV_ID_LPT_LP 0x9C3A /* Lynx Point LP */
-/*
- * MEI HW Section
- */
-
-/* MEI registers */
-/* H_CB_WW - Host Circular Buffer (CB) Write Window register */
-#define H_CB_WW 0
-/* H_CSR - Host Control Status register */
-#define H_CSR 4
-/* ME_CB_RW - ME Circular Buffer Read Window register (read only) */
-#define ME_CB_RW 8
-/* ME_CSR_HA - ME Control Status Host Access register (read only) */
-#define ME_CSR_HA 0xC
-
-
-/* register bits of H_CSR (Host Control Status register) */
-/* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */
-#define H_CBD 0xFF000000
-/* Host Circular Buffer Write Pointer */
-#define H_CBWP 0x00FF0000
-/* Host Circular Buffer Read Pointer */
-#define H_CBRP 0x0000FF00
-/* Host Reset */
-#define H_RST 0x00000010
-/* Host Ready */
-#define H_RDY 0x00000008
-/* Host Interrupt Generate */
-#define H_IG 0x00000004
-/* Host Interrupt Status */
-#define H_IS 0x00000002
-/* Host Interrupt Enable */
-#define H_IE 0x00000001
-
-
-/* register bits of ME_CSR_HA (ME Control Status Host Access register) */
-/* ME CB (Circular Buffer) Depth HRA (Host Read Access) - host read only
-access to ME_CBD */
-#define ME_CBD_HRA 0xFF000000
-/* ME CB Write Pointer HRA - host read only access to ME_CBWP */
-#define ME_CBWP_HRA 0x00FF0000
-/* ME CB Read Pointer HRA - host read only access to ME_CBRP */
-#define ME_CBRP_HRA 0x0000FF00
-/* ME Reset HRA - host read only access to ME_RST */
-#define ME_RST_HRA 0x00000010
-/* ME Ready HRA - host read only access to ME_RDY */
-#define ME_RDY_HRA 0x00000008
-/* ME Interrupt Generate HRA - host read only access to ME_IG */
-#define ME_IG_HRA 0x00000004
-/* ME Interrupt Status HRA - host read only access to ME_IS */
-#define ME_IS_HRA 0x00000002
-/* ME Interrupt Enable HRA - host read only access to ME_IE */
-#define ME_IE_HRA 0x00000001
-
-/*
* MEI Version
*/
#define HBM_MINOR_VERSION 0
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 39cd289..f0b02ba 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -21,7 +21,9 @@
#include <linux/watchdog.h>
#include <linux/poll.h>
#include <linux/mei.h>
+
#include "hw.h"
+#include "hw-me.h"
/*
* watch dog definition
--
1.7.4.4
next prev parent reply other threads:[~2012-12-25 17:06 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-25 17:05 [RESEND char-misc-next 00/14] mei: cleanups Tomas Winkler
2012-12-25 17:05 ` [RESEND char-misc-next 01/14] mei: drop redundant length parameter from mei_write_message function Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 02/14] mei: use unified format for printing mei message header Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 03/14] mei: move internal host clients ids to mei_dev.h from hw.h Tomas Winkler
2012-12-25 17:06 ` Tomas Winkler [this message]
2012-12-25 17:06 ` [RESEND char-misc-next 05/14] mei: include local headers after the system ones Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 06/14] mei: kill not used BAR0 length and base variables Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 07/14] mei: mei_me_client is not hw API move to mei_dev.h Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 08/14] mei: move hw dependent functions to interface.c Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 09/14] mei: move host bus message handling to hbm.c Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 10/14] mei: drop nonexistent function prototype Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 11/14] mei: simplify preparing client host bus messages Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 12/14] mei: use structured buffer for the write buffer Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 13/14] mei: add common prefix to hbm function Tomas Winkler
2012-12-25 17:06 ` [RESEND char-misc-next 14/14] mei: move hbm responses from interrupt.c to hbm.c Tomas Winkler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1356455172-31959-5-git-send-email-tomas.winkler@intel.com \
--to=tomas.winkler@intel.com \
--cc=alan@linux.intel.com \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®