From: anish kumar <anish198519851985@gmail.com>
To: "jonsmirl@gmail.com" <jonsmirl@gmail.com>
Cc: Woody Wu <narkewoody@gmail.com>,
kernelnewbies@kernelnewbies.org,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: What does ISA/PCI really mean to ARM architecture?
Date: Thu, 27 Dec 2012 22:16:42 +0530 [thread overview]
Message-ID: <1356626802.5433.34.camel@anish-Inspiron-N5050> (raw)
In-Reply-To: <CAKON4OwtPJYRp=FevsX5NLzohX=iLxf2FS0dG4hmdpcGayBy8Q@mail.gmail.com>
On Thu, 2012-12-27 at 11:22 -0500, jonsmirl@gmail.com wrote:
> On Thu, Dec 27, 2012 at 3:27 AM, Woody Wu <narkewoody@gmail.com> wrote:
> > Hi, list
> >
> > I know this might be a very basic question. But I really don't clear at
> > it.
> >
> > Can a peripheral chip that claims to be ISA or PCI device be used in a
> > ARM based embedded system? For these kind of chips, I only concern
> > about the planar kind of devices, means they are not on a dedicated
> > expansion card.
> >
> > From hardware point of view, to attach a ISA or PCI planar chip, is
> > there any requirement need to fulfill on a ARM board?
>
> See if your ARM CPU has an interface for SRAM (in addition to DRAM).
> You can use a SRAM chip select to access ISA type devices. But you may
Would you mind explaining this in detail?
> need additional buffers/latches to do this.
>
> Another solution is to attach you peripherals using USB. Almost all
Connect using USB what does this mean?
> embedded wifi chips are attached this way. The USB connectors aren't
> required, you can route USB around on your PCB. USB hub chips are
> $0.35 if you need more ports. USB Ethernet chips are available.
>
> Other options include SPI/I2C. It is worthwhile to investigate these
Only chips which support SPI/I2C can be used but ISA/PCI is completely
orthogonal to this AFAIK.
> serial solutions before doing a parallel solution. Parallel buses eat
> up a lot of PCB space.
>
>
> >
> > From Linux driver point of view, what are needed to support an ISA or
> > PCI driver in ARM architecture? More important, is ISA or PCI device a
> > platform device? If not, how to add these kind of devices in my board
> > definition?
> >
> > I know my question might not be reasonable enough, if I messed concepts,
> > please sort me out.
> >
> >
> > Thanks in advance.
> >
> >
> > --
> > woody
> > I can't go back to yesterday - because I was a different person then.
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
>
>
>
> --
> Jon Smirl
> jonsmirl@gmail.com
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2012-12-27 16:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-27 8:27 Woody Wu
2012-12-27 9:51 ` Geert Uytterhoeven
2012-12-27 14:19 ` anish kumar
2012-12-27 16:07 ` Arnd Bergmann
2012-12-27 16:22 ` jonsmirl
2012-12-27 16:46 ` anish kumar [this message]
2012-12-27 17:10 ` jonsmirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1356626802.5433.34.camel@anish-Inspiron-N5050 \
--to=anish198519851985@gmail.com \
--cc=jonsmirl@gmail.com \
--cc=kernelnewbies@kernelnewbies.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narkewoody@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®