From: Prashant Gaikwad <pgaikwad@nvidia.com>
To: <mturquette@linaro.org>, <swarren@nvidia.com>,
<grant.likely@secretlab.ca>, <linus.walleij@linaro.org>,
<rob.herring@calxeda.com>, <maxime.ripard@free-electrons.com>,
<linux@prisktech.co.nz>, <josh.cartwright@ni.com>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Prashant Gaikwad <pgaikwad@nvidia.com>
Subject: [PATCH 1/7] clk: add common of_clk_init() function
Date: Fri, 4 Jan 2013 12:30:52 +0530 [thread overview]
Message-ID: <1357282858-2112-1-git-send-email-pgaikwad@nvidia.com> (raw)
Modify of_clk_init function so that it will determine which
driver to initialize based on device tree instead of each driver
registering to it.
Based on a similar patch for drivers/irqchip by Thomas Petazzoni and
drivers/clocksource by Stephen Warren.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
---
drivers/clk/clk-fixed-rate.c | 1 +
drivers/clk/clk.c | 9 +++++++++
include/asm-generic/vmlinux.lds.h | 10 ++++++++++
include/linux/clk-provider.h | 6 ++++++
4 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index af78ed6..f2104df 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -101,4 +101,5 @@ void __init of_fixed_clk_setup(struct device_node *node)
of_clk_add_provider(node, of_clk_src_simple_get, clk);
}
EXPORT_SYMBOL_GPL(of_fixed_clk_setup);
+CLK_OF_DECLARE(fixed_clk, "fixed-clock", of_fixed_clk_setup);
#endif
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 037b48a..fb38dd8 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/device.h>
+#include <linux/init.h>
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
@@ -1805,6 +1806,11 @@ struct of_clk_provider {
void *data;
};
+extern struct of_device_id __clk_of_table[];
+
+static const struct of_device_id __clk_of_table_sentinel
+ __used __section(__clk_of_table_end);
+
static LIST_HEAD(of_clk_providers);
static DEFINE_MUTEX(of_clk_lock);
@@ -1933,6 +1939,9 @@ void __init of_clk_init(const struct of_device_id *matches)
{
struct device_node *np;
+ if (!matches)
+ matches = __clk_of_table;
+
for_each_matching_node(np, matches) {
const struct of_device_id *match = of_match_node(matches, np);
of_clk_init_cb_t clk_init_cb = match->data;
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 1e744c5..8282f7c 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -158,6 +158,15 @@
#define CLKSRC_OF_TABLES()
#endif
+#ifdef CONFIG_COMMON_CLK
+#define CLK_OF_TABLES() . = ALIGN(8); \
+ VMLINUX_SYMBOL(__clk_of_table) = .; \
+ *(__clk_of_table) \
+ *(__clk_of_table_end)
+#else
+#define CLK_OF_TABLES()
+#endif
+
#define KERNEL_DTB() \
STRUCT_ALIGN(); \
VMLINUX_SYMBOL(__dtb_start) = .; \
@@ -502,6 +511,7 @@
CPU_DISCARD(init.rodata) \
MEM_DISCARD(init.rodata) \
CLKSRC_OF_TABLES() \
+ CLK_OF_TABLES() \
KERNEL_DTB()
#define INIT_TEXT \
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 4989b8a..7f197d7 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -379,7 +379,13 @@ struct clk_onecell_data {
};
struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
const char *of_clk_get_parent_name(struct device_node *np, int index);
+
void of_clk_init(const struct of_device_id *matches);
+#define CLK_OF_DECLARE(name, compat, fn) \
+ static const struct of_device_id __clk_of_table_##name \
+ __used __section(__clk_of_table) \
+ = { .compatible = compat, .data = fn };
+
#endif /* CONFIG_COMMON_CLK */
#endif /* CLK_PROVIDER_H */
--
1.7.4.1
next reply other threads:[~2013-01-04 7:01 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 7:00 Prashant Gaikwad [this message]
2013-01-04 7:00 ` [PATCH 2/7] clk: tegra: Use " Prashant Gaikwad
2013-01-04 16:30 ` Stephen Warren
2013-01-05 2:44 ` Prashant Gaikwad
2013-01-24 19:20 ` Mike Turquette
2013-01-24 19:32 ` Stephen Warren
[not found] ` <20130125005729.10623.61165@quantum>
2013-01-25 4:44 ` Stephen Warren
2013-02-01 4:49 ` Prashant Gaikwad
2013-02-01 22:53 ` Mike Turquette
2013-01-04 7:00 ` [PATCH 3/7] clk: sunxi: " Prashant Gaikwad
2013-01-04 7:00 ` [PATCH 4/7] clk: highbank: " Prashant Gaikwad
2013-01-18 17:55 ` Mike Turquette
2013-01-04 7:00 ` [PATCH 5/7] clk: vt8500: " Prashant Gaikwad
2013-01-18 17:56 ` Mike Turquette
2013-01-18 21:08 ` Tony Prisk
[not found] ` <20130124191534.10623.14882@quantum>
2013-01-25 4:01 ` Tony Prisk
2013-01-04 7:00 ` [PATCH 6/7] clk: zynq: " Prashant Gaikwad
2013-01-04 7:00 ` [PATCH 7/7] clk: vexpress: " Prashant Gaikwad
2013-01-18 17:58 ` Mike Turquette
2013-01-21 16:03 ` Pawel Moll
2013-01-22 9:13 ` Linus Walleij
2013-01-23 10:54 ` Pawel Moll
2013-01-10 19:53 ` [PATCH 1/7] clk: add " Josh Cartwright
2013-01-11 5:01 ` Prashant Gaikwad
2013-01-13 8:57 ` Maxime Ripard
2013-01-24 17:47 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357282858-2112-1-git-send-email-pgaikwad@nvidia.com \
--to=pgaikwad@nvidia.com \
--cc=grant.likely@secretlab.ca \
--cc=josh.cartwright@ni.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@prisktech.co.nz \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@linaro.org \
--cc=rob.herring@calxeda.com \
--cc=swarren@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®