From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755207Ab3ADQgE (ORCPT ); Fri, 4 Jan 2013 11:36:04 -0500 Received: from smtp131.dfw.emailsrvr.com ([67.192.241.131]:41768 "EHLO smtp131.dfw.emailsrvr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754861Ab3ADQfZ (ORCPT ); Fri, 4 Jan 2013 11:35:25 -0500 From: Mark Langsdorf To: linux-kernel@vger.kernel.org, cpufreq@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Mark Langsdorf , Rob Herring Subject: [PATCH 2/4 v10] clk, highbank: Prevent glitches in non-bypass reset mode Date: Fri, 4 Jan 2013 10:35:44 -0600 Message-Id: <1357317346-1120-3-git-send-email-mark.langsdorf@calxeda.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1357317346-1120-1-git-send-email-mark.langsdorf@calxeda.com> References: <1351631056-25938-1-git-send-email-mark.langsdorf@calxeda.com> <1357317346-1120-1-git-send-email-mark.langsdorf@calxeda.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The highbank clock will glitch with the current code if the clock rate is reset without relocking the PLL. Program the PLL correctly to prevent glitches. Signed-off-by: Mark Langsdorf Signed-off-by: Rob Herring Acked-by: Mike Turquette --- Changes from v6, v7, v8, v9 None. Changes from v5 Added Mike Turquette's ack. Changes from v4 None. Changes from v3 Changelog text and patch name now correspond to the actual patch. was clk, highbank: remove non-bypass reset mode. Changes from v2 None. Changes from v1 Removed erroneous reformating. drivers/clk/clk-highbank.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c index 52fecad..3a0b723 100644 --- a/drivers/clk/clk-highbank.c +++ b/drivers/clk/clk-highbank.c @@ -182,8 +182,10 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate, reg |= HB_PLL_EXT_ENA; reg &= ~HB_PLL_EXT_BYPASS; } else { + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg); reg &= ~HB_PLL_DIVQ_MASK; reg |= divq << HB_PLL_DIVQ_SHIFT; + writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg); } writel(reg, hbclk->reg); -- 1.8.0.2