From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754031Ab3AGLXR (ORCPT ); Mon, 7 Jan 2013 06:23:17 -0500 Received: from mail-wg0-f51.google.com ([74.125.82.51]:39447 "EHLO mail-wg0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753442Ab3AGLXQ (ORCPT ); Mon, 7 Jan 2013 06:23:16 -0500 From: Fabio Baltieri To: Vinod Koul Cc: Dan Williams , Linus Walleij , Srinidhi Kasagar , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Narayanan , Fabio Baltieri Subject: [PATCH 01/16] dmaengine: ste_dma40: reset priority bit for logical channels Date: Mon, 7 Jan 2013 12:21:43 +0100 Message-Id: <1357557718-15676-2-git-send-email-fabio.baltieri@linaro.org> X-Mailer: git-send-email 1.7.12.1 In-Reply-To: <1357557718-15676-1-git-send-email-fabio.baltieri@linaro.org> References: <1357557718-15676-1-git-send-email-fabio.baltieri@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Narayanan This patch sets the SSCFG/SDCFG bit[7] PRI only for physical channel requests with high priority. For logical channels, this bit will be zero. Signed-off-by: Narayanan G Reviewed-by: Rabin Vincent Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri --- drivers/dma/ste_dma40_ll.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 851ad56..d64b72a 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -102,17 +102,18 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; + /* Set the priority bit to high for the physical channel */ + if (cfg->high_priority) { + src |= 1 << D40_SREG_CFG_PRI_POS; + dst |= 1 << D40_SREG_CFG_PRI_POS; + } + } else { /* Logical channel */ dst |= 1 << D40_SREG_CFG_LOG_GIM_POS; src |= 1 << D40_SREG_CFG_LOG_GIM_POS; } - if (cfg->high_priority) { - src |= 1 << D40_SREG_CFG_PRI_POS; - dst |= 1 << D40_SREG_CFG_PRI_POS; - } - if (cfg->src_info.big_endian) src |= 1 << D40_SREG_CFG_LBE_POS; if (cfg->dst_info.big_endian) -- 1.7.12.1