From: Roger Quadros <rogerq@ti.com>
To: <balbi@ti.com>, <sameo@linux.intel.com>, <tony@atomide.com>
Cc: <kishon@ti.com>, <sshtylyov@mvista.com>, <bjorn@mork.no>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <rogerq@ti.com>
Subject: [PATCH v6 15/22] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode
Date: Wed, 16 Jan 2013 16:43:46 +0200 [thread overview]
Message-ID: <1358347433-329-16-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1358347433-329-1-git-send-email-rogerq@ti.com>
Enable the optional HSIC clocks (60MHz and 480MHz) for the ports
that are configured in HSIC mode.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/mfd/omap-usb-host.c | 77 +++++++++++++++++++++++++++++++++++++++---
1 files changed, 71 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 9c45bbc..2925d57 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -93,6 +93,8 @@
struct usbhs_hcd_omap {
int nports;
struct clk **utmi_clk;
+ struct clk **hsic60m_clk;
+ struct clk **hsic480m_clk;
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
@@ -286,7 +288,28 @@ static int usbhs_runtime_resume(struct device *dev)
clk_enable(omap->ehci_logic_fck);
for (i = 0; i < omap->nports; i++) {
- if (is_ehci_tll_mode(pdata->port_mode[i])) {
+ switch (pdata->port_mode[i]) {
+ case OMAP_EHCI_PORT_MODE_HSIC:
+ if (omap->hsic60m_clk[i]) {
+ r = clk_enable(omap->hsic60m_clk[i]);
+ if (r) {
+ dev_err(dev,
+ "Can't enable port %d hsic60m clk:%d\n",
+ i, r);
+ }
+ }
+
+ if (omap->hsic480m_clk[i]) {
+ r = clk_enable(omap->hsic480m_clk[i]);
+ if (r) {
+ dev_err(dev,
+ "Can't enable port %d hsic480m clk:%d\n",
+ i, r);
+ }
+ }
+ /* Fall through as HSIC mode needs utmi_clk */
+
+ case OMAP_EHCI_PORT_MODE_TLL:
if (omap->utmi_clk[i]) {
r = clk_enable(omap->utmi_clk[i]);
if (r) {
@@ -295,6 +318,9 @@ static int usbhs_runtime_resume(struct device *dev)
i, r);
}
}
+ break;
+ default:
+ break;
}
}
@@ -315,9 +341,21 @@ static int usbhs_runtime_suspend(struct device *dev)
spin_lock_irqsave(&omap->lock, flags);
for (i = 0; i < omap->nports; i++) {
- if (is_ehci_tll_mode(pdata->port_mode[i])) {
+ switch (pdata->port_mode[i]) {
+ case OMAP_EHCI_PORT_MODE_HSIC:
+ if (omap->hsic60m_clk[i])
+ clk_disable(omap->hsic60m_clk[i]);
+
+ if (omap->hsic480m_clk[i])
+ clk_disable(omap->hsic480m_clk[i]);
+ /* Fall through as utmi_clks were used in HSIC mode */
+
+ case OMAP_EHCI_PORT_MODE_TLL:
if (omap->utmi_clk[i])
clk_disable(omap->utmi_clk[i]);
+ break;
+ default:
+ break;
}
}
@@ -524,7 +562,10 @@ static int usbhs_omap_probe(struct platform_device *pdev)
i = sizeof(struct clk *) * omap->nports;
omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
- if (!omap->utmi_clk) {
+ omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+ omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+
+ if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
dev_err(dev, "Memory allocation failed\n");
ret = -ENOMEM;
goto err_mem;
@@ -582,7 +623,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
for (i = 0; i < omap->nports; i++) {
struct clk *pclk;
- char clkname[] = "usb_host_hs_utmi_px_clk";
+ char clkname[] = "usb_host_hs_hsic480m_px_clk";
/* clock names are indexed from 1*/
snprintf(clkname, sizeof(clkname),
@@ -598,6 +639,24 @@ static int usbhs_omap_probe(struct platform_device *pdev)
clkname, PTR_ERR(pclk));
else
omap->utmi_clk[i] = pclk;
+
+ snprintf(clkname, sizeof(clkname),
+ "usb_host_hs_hsic480m_p%d_clk", i + 1);
+ pclk = clk_get(dev, clkname);
+ if (IS_ERR(pclk))
+ dev_dbg(dev, "Failed to get clock : %s : %ld\n",
+ clkname, PTR_ERR(pclk));
+ else
+ omap->hsic480m_clk[i] = pclk;
+
+ snprintf(clkname, sizeof(clkname),
+ "usb_host_hs_hsic60m_p%d_clk", i + 1);
+ pclk = clk_get(dev, clkname);
+ if (IS_ERR(pclk))
+ dev_dbg(dev, "Failed to get clock : %s : %ld\n",
+ clkname, PTR_ERR(pclk));
+ else
+ omap->hsic60m_clk[i] = pclk;
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
@@ -641,8 +700,11 @@ static int usbhs_omap_probe(struct platform_device *pdev)
err_alloc:
omap_usbhs_deinit(&pdev->dev);
- for (i = 0; i < omap->nports; i++)
+ for (i = 0; i < omap->nports; i++) {
clk_put(omap->utmi_clk[i]);
+ clk_put(omap->hsic60m_clk[i]);
+ clk_put(omap->hsic480m_clk[i]);
+ }
clk_put(omap->init_60m_fclk);
@@ -680,8 +742,11 @@ static int usbhs_omap_remove(struct platform_device *pdev)
omap_usbhs_deinit(&pdev->dev);
- for (i = 0; i < omap->nports; i++)
+ for (i = 0; i < omap->nports; i++) {
clk_put(omap->utmi_clk[i]);
+ clk_put(omap->hsic60m_clk[i]);
+ clk_put(omap->hsic480m_clk[i]);
+ }
clk_put(omap->init_60m_fclk);
clk_put(omap->utmi_p1_gfclk);
--
1.7.4.1
next prev parent reply other threads:[~2013-01-16 14:47 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-16 14:43 [PATCH v6 00/22] OMAP USB Host cleanup Roger Quadros
2013-01-16 14:43 ` [PATCH v6 01/22] mfd: omap-usb-host: Consolidate OMAP USB-HS platform data Roger Quadros
2013-01-16 14:43 ` [PATCH v6 02/22] mfd: omap-usb-tll: Fix channel count detection Roger Quadros
2013-01-16 14:43 ` [PATCH v6 03/22] mfd: omap-usb-tll: Use devm_kzalloc/ioremap and clean up error path Roger Quadros
2013-01-16 19:37 ` Sergei Shtylyov
2013-01-17 9:12 ` Roger Quadros
2013-01-17 10:32 ` Roger Quadros
2013-01-16 14:43 ` [PATCH v6 04/22] mfd: omap-usb-tll: Clean up clock handling Roger Quadros
2013-01-16 14:55 ` Russell King - ARM Linux
2013-01-16 15:05 ` Roger Quadros
2013-01-16 14:43 ` [PATCH v6 05/22] mfd: omap-usb-tll: introduce and use mode_needs_tll() Roger Quadros
2013-01-16 14:43 ` [PATCH v6 06/22] mfd: omap-usb-tll: Check for missing platform data in probe Roger Quadros
2013-01-16 14:43 ` [PATCH v6 07/22] mfd: omap-usb-tll: Fix error message Roger Quadros
2013-01-16 14:43 ` [PATCH v6 08/22] mfd: omap-usb-tll: serialize access to TLL device Roger Quadros
2013-01-16 14:43 ` [PATCH v6 09/22] mfd: omap-usb-tll: Add OMAP5 revision and HSIC support Roger Quadros
2013-01-16 14:43 ` [PATCH v6 10/22] mfd: omap_usb_host: Avoid missing platform data checks in suspend/resume Roger Quadros
2013-01-16 14:43 ` [PATCH v6 11/22] mfd: omap-usb-host: Use devm_kzalloc() and devm_request_and_ioremap() Roger Quadros
2013-01-16 19:34 ` Sergei Shtylyov
2013-01-16 14:43 ` [PATCH v6 12/22] mfd: omap-usb-host: know about number of ports from revision register Roger Quadros
2013-01-16 14:43 ` [PATCH v6 13/22] mfd: omap-usb-host: override number of ports from platform data Roger Quadros
2013-01-16 14:43 ` [PATCH v6 14/22] mfd: omap-usb-host: cleanup clock management code Roger Quadros
2013-01-16 14:43 ` Roger Quadros [this message]
2013-01-16 14:43 ` [PATCH v6 16/22] mfd: omap-usb-host: Get rid of unnecessary spinlock Roger Quadros
2013-01-16 14:43 ` [PATCH v6 17/22] mfd: omap-usb-host: clean up omap_usbhs_init() Roger Quadros
2013-01-16 14:43 ` [PATCH v6 18/22] USB: ehci-omap: Don't free gpios that we didn't request Roger Quadros
2013-01-16 14:43 ` [PATCH v6 19/22] ARM: OMAP3: clock data: get rid of unused USB host clock aliases and dummies Roger Quadros
2013-01-16 14:43 ` [PATCH v6 20/22] ARM: OMAP4: clock data: get rid of unused USB host clock aliases Roger Quadros
2013-01-16 14:43 ` [PATCH v6 21/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure Roger Quadros
2013-01-16 14:43 ` [PATCH v6 22/22] mdf: omap-usb-host: get rid of build warning Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358347433-329-16-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=bjorn@mork.no \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=sshtylyov@mvista.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®