From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756441Ab3APPCj (ORCPT ); Wed, 16 Jan 2013 10:02:39 -0500 Received: from comal.ext.ti.com ([198.47.26.152]:38899 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753846Ab3APPCc (ORCPT ); Wed, 16 Jan 2013 10:02:32 -0500 From: Kishon Vijay Abraham I To: , , , , , , , , CC: , , , , , , , , , , , , , , , , Subject: [RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information Date: Wed, 16 Jan 2013 20:30:58 +0530 Message-ID: <1358348462-27693-3-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1358348462-27693-1-git-send-email-kishon@ti.com> References: <1358348462-27693-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This is in preparation for the changes in PHY library to support adding and getting multiple PHYs of the same type. In the new design, the binding information between the PHY and the USB controller should be specified in the platform specific initialization code. So it's been done for OMAP platforms here. Signed-off-by: Kishon Vijay Abraham I --- This kind-of binding should be done in all the platforms (I've done only for OMAP platform). arch/arm/mach-omap2/usb-musb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 9d27e3f..bbe2fa5 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "omap_device.h" #include "soc.h" @@ -85,8 +86,12 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx()) { musb_plat.has_mailbox = true; + usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); + } else if (cpu_is_omap34xx()) { + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); + } if (soc_is_am35xx()) { oh_name = "am35x_otg_hs"; -- 1.7.9.5