From: Frederic Weisbecker <fweisbec@gmail.com>
To: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
Alessio Igor Bogani <abogani@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Chris Metcalf <cmetcalf@tilera.com>,
Christoph Lameter <cl@linux.com>,
Geoff Levand <geoff@infradead.org>,
Gilad Ben Yossef <gilad@benyossef.com>,
Hakan Akkan <hakanakkan@gmail.com>,
Ingo Molnar <mingo@kernel.org>,
Li Zhong <zhong@linux.vnet.ibm.com>,
Namhyung Kim <namhyung.kim@lge.com>,
Paul Gortmaker <paul.gortmaker@windriver.com>,
Peter Zijlstra <peterz@infradead.org>,
Steven Rostedt <rostedt@goodmis.org>,
Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v4] context_tracking: Add comments on interface and internals
Date: Wed, 16 Jan 2013 17:16:37 +0100 [thread overview]
Message-ID: <1358352997-29585-1-git-send-email-fweisbec@gmail.com> (raw)
In-Reply-To: <87wqvdl1n8.fsf@sejong.aot.lge.com>
This subsystem lacks many explanations on its purpose and
design. Add these missing comments.
v4: Document function parameter to be more kernel-doc
friendly, as per Namhyung suggestion.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
kernel/context_tracking.c | 75 +++++++++++++++++++++++++++++++++++++++------
1 files changed, 65 insertions(+), 10 deletions(-)
diff --git a/kernel/context_tracking.c b/kernel/context_tracking.c
index e0e07fd..d566aba 100644
--- a/kernel/context_tracking.c
+++ b/kernel/context_tracking.c
@@ -1,3 +1,19 @@
+/*
+ * Context tracking: Probe on high level context boundaries such as kernel
+ * and userspace. This includes syscalls and exceptions entry/exit.
+ *
+ * This is used by RCU to remove its dependency on the timer tick while a CPU
+ * runs in userspace.
+ *
+ * Started by Frederic Weisbecker:
+ *
+ * Copyright (C) 2012 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com>
+ *
+ * Many thanks to Gilad Ben-Yossef, Paul McKenney, Ingo Molnar, Andrew Morton,
+ * Steven Rostedt, Peter Zijlstra for suggestions and improvements.
+ *
+ */
+
#include <linux/context_tracking.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
@@ -6,8 +22,8 @@
struct context_tracking {
/*
- * When active is false, hooks are not set to
- * minimize overhead: TIF flags are cleared
+ * When active is false, probes are unset in order
+ * to minimize overhead: TIF flags are cleared
* and calls to user_enter/exit are ignored. This
* may be further optimized using static keys.
*/
@@ -24,6 +40,15 @@ static DEFINE_PER_CPU(struct context_tracking, context_tracking) = {
#endif
};
+/**
+ * user_enter - Inform the context tracking that the CPU is going to
+ * enter userspace mode.
+ *
+ * This function must be called right before we switch from the kernel
+ * to userspace, when it's guaranteed the remaining kernel instructions
+ * to execute won't use any RCU read side critical section because this
+ * function sets RCU in extended quiescent state.
+ */
void user_enter(void)
{
unsigned long flags;
@@ -39,40 +64,70 @@ void user_enter(void)
if (in_interrupt())
return;
+ /* Kernel threads aren't supposed to go to userspace */
WARN_ON_ONCE(!current->mm);
local_irq_save(flags);
if (__this_cpu_read(context_tracking.active) &&
__this_cpu_read(context_tracking.state) != IN_USER) {
__this_cpu_write(context_tracking.state, IN_USER);
+ /*
+ * At this stage, only low level arch entry code remains and
+ * then we'll run in userspace. We can assume there won't be
+ * any RCU read-side critical section until the next call to
+ * user_exit() or rcu_irq_enter(). Let's remove RCU's dependency
+ * on the tick.
+ */
rcu_user_enter();
}
local_irq_restore(flags);
}
+
+/**
+ * user_exit - Inform the context tracking that the CPU is
+ * exiting userspace mode and entering the kernel.
+ *
+ * This function must be called after we entered the kernel from userspace
+ * before any use of RCU read side critical section. This potentially include
+ * any high level kernel code like syscalls, exceptions, signal handling, etc...
+ *
+ * This call supports re-entrancy. This way it can be called from any exception
+ * handler without needing to know if we came from userspace or not.
+ */
void user_exit(void)
{
unsigned long flags;
- /*
- * Some contexts may involve an exception occuring in an irq,
- * leading to that nesting:
- * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
- * This would mess up the dyntick_nesting count though. And rcu_irq_*()
- * helpers are enough to protect RCU uses inside the exception. So
- * just return immediately if we detect we are in an IRQ.
- */
if (in_interrupt())
return;
local_irq_save(flags);
if (__this_cpu_read(context_tracking.state) == IN_USER) {
__this_cpu_write(context_tracking.state, IN_KERNEL);
+ /*
+ * We are going to run code that may use RCU. Inform
+ * RCU core about that (ie: we may need the tick again).
+ */
rcu_user_exit();
}
local_irq_restore(flags);
}
+
+/**
+ * context_tracking_task_switch - context switch the syscall callbacks
+ * @prev: the task that is being switched out
+ * @next: the task that is being switched in
+ *
+ * The context tracking uses the syscall slow path to implement its user-kernel
+ * boundaries probes on syscalls. This way it doesn't impact the syscall fast
+ * path on CPUs that don't do context tracking.
+ *
+ * But we need to clear the flag on the previous task because it may later
+ * migrate to some CPU that doesn't do the context tracking. As such the TIF
+ * flag may not be desired there.
+ */
void context_tracking_task_switch(struct task_struct *prev,
struct task_struct *next)
{
--
1.7.5.4
next prev parent reply other threads:[~2013-01-16 16:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-16 12:32 [PATCH] " Frederic Weisbecker
2013-01-16 13:04 ` Namhyung Kim
2013-01-16 14:58 ` Frederic Weisbecker
2013-01-16 16:16 ` Frederic Weisbecker [this message]
2013-01-16 21:18 ` [PATCH v4] " Andrew Morton
2013-01-16 21:49 ` Steven Rostedt
2013-01-16 22:06 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358352997-29585-1-git-send-email-fweisbec@gmail.com \
--to=fweisbec@gmail.com \
--cc=abogani@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cl@linux.com \
--cc=cmetcalf@tilera.com \
--cc=geoff@infradead.org \
--cc=gilad@benyossef.com \
--cc=hakanakkan@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=namhyung.kim@lge.com \
--cc=paul.gortmaker@windriver.com \
--cc=paulmck@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=zhong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®