From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754817Ab3ARLr1 (ORCPT ); Fri, 18 Jan 2013 06:47:27 -0500 Received: from mail-ea0-f182.google.com ([209.85.215.182]:39273 "EHLO mail-ea0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751858Ab3ARLr0 (ORCPT ); Fri, 18 Jan 2013 06:47:26 -0500 From: Fabio Baltieri To: linux-watchdog@vger.kernel.org, Samuel Ortiz , Wim Van Sebroeck Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Linus Walleij , Lee Jones , Srinidhi Kasagar , Fabio Baltieri Subject: [PATCH 0/4] add ux500_wdt support Date: Fri, 18 Jan 2013 12:40:10 +0100 Message-Id: <1358509214-22407-1-git-send-email-fabio.baltieri@linaro.org> X-Mailer: git-send-email 1.7.12.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi all, this set adds support for the ux500_wdt timer, implemented in the PRCMU unit of ST-Ericsson ux500 architecture. The first two patches add the necessary definitions and function export to the PRCMU driver currently in mainline, while the third an fourth patches add the actual watchdog driver and mfd_cell definition to make it probe when PRCMU is compiled in. As the patches touches files in both mfd and watchdog subsystems, what do you think is the best way to handle this set? Thanks, Fabio Fabio Baltieri (4): mfd: dbx500-prcmu: add watchdog ID definitions mfd: dbx500-prcmu: export a9wdog functions watchdog: add support for ux500_wdt watchdog mfd: db8500-prcmu: add ux500_wdt mfd_cell drivers/mfd/db8500-prcmu.c | 17 ++++ drivers/watchdog/Kconfig | 12 +++ drivers/watchdog/Makefile | 1 + drivers/watchdog/ux500_wdt.c | 171 ++++++++++++++++++++++++++++++++ include/linux/mfd/dbx500-prcmu.h | 12 +++ include/linux/platform_data/ux500_wdt.h | 19 ++++ 6 files changed, 232 insertions(+) create mode 100644 drivers/watchdog/ux500_wdt.c create mode 100644 include/linux/platform_data/ux500_wdt.h -- 1.7.12.1