From: Arnd Bergmann <arnd@arndb.de>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, arm@kernel.org,
Arnd Bergmann <arnd@arndb.de>, Ben Dooks <ben-linux@fluff.org>,
Kukjin Kim <kgene.kim@samsung.com>,
stable@vger.kernel.org
Subject: [PATCH 03/15] ARM: samsung: fix assembly syntax for new gas
Date: Mon, 21 Jan 2013 17:15:56 +0000 [thread overview]
Message-ID: <1358788568-11137-4-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1358788568-11137-1-git-send-email-arnd@arndb.de>
Recent assembler versions complain about extraneous
whitespace inside [] brackets. This fixes all of
these instances for the samsung platforms. We should
backport this to all kernels that might need to
be built with new binutils.
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2410.S:48: Error: ARM register expected -- `ldr r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:49: Error: ARM register expected -- `ldr r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:50: Error: ARM register expected -- `ldr r9,[ r6 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:64: Error: ARM register expected -- `streq r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:65: Error: ARM register expected -- `streq r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:66: Error: ARM register expected -- `streq r9,[ r6 ]'
arch/arm/kernel/debug.S: Assembler messages:
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/mach-s3c24xx/pm-h1940.S: Assembler messages:
arch/arm/mach-s3c24xx/pm-h1940.S:33: Error: ARM register expected -- `ldr pc,[ r0,#((0x0B8)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000)))]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2412.S:60: Error: ARM register expected -- `ldrne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:61: Error: ARM register expected -- `strne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:62: Error: ARM register expected -- `ldrne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:63: Error: ARM register expected -- `strne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:64: Error: ARM register expected -- `ldrne r9,[ r3 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:65: Error: ARM register expected -- `strne r9,[ r3 ]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: stable@vger.kernel.org
---
arch/arm/mach-s3c24xx/include/mach/debug-macro.S | 12 ++++++------
arch/arm/mach-s3c24xx/include/mach/entry-macro.S | 4 ++--
arch/arm/mach-s3c24xx/pm-h1940.S | 2 +-
arch/arm/mach-s3c24xx/sleep-s3c2410.S | 12 ++++++------
arch/arm/mach-s3c24xx/sleep-s3c2412.S | 12 ++++++------
arch/arm/plat-samsung/include/plat/debug-macro.S | 18 +++++++++---------
6 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
index 4135de8..13ed33c 100644
--- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
@@ -40,17 +40,17 @@
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
- ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
1004:
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
moveq \rd, \rd, lsr #SHIFT_2440TXF
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
.macro fifo_full_s3c2410 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
@@ -68,18 +68,18 @@
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
- ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
10000:
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
.macro fifo_level_s3c2410 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S3C2410_UFSTAT_TXMASK
.endm
diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
index 7615a14..6a21bee 100644
--- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
@@ -31,10 +31,10 @@
@@ try the interrupt offset register, since it is there
- ldr \irqstat, [ \base, #INTPND ]
+ ldr \irqstat, [\base, #INTPND ]
teq \irqstat, #0
beq 1002f
- ldr \irqnr, [ \base, #INTOFFSET ]
+ ldr \irqnr, [\base, #INTOFFSET ]
mov \tmp, #1
tst \irqstat, \tmp, lsl \irqnr
bne 1001f
diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S
index c93bf2d..6183a68 100644
--- a/arch/arm/mach-s3c24xx/pm-h1940.S
+++ b/arch/arm/mach-s3c24xx/pm-h1940.S
@@ -30,4 +30,4 @@
h1940_pm_return:
mov r0, #S3C2410_PA_GPIO
- ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
+ ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
index dd5b638..65200ae 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
@@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend)
ldr r4, =S3C2410_REFRESH
ldr r5, =S3C24XX_MISCCR
ldr r6, =S3C2410_CLKCON
- ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
- ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
- ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
+ ldr r7, [r4] @ get REFRESH (and ensure in TLB)
+ ldr r8, [r5] @ get MISCCR (and ensure in TLB)
+ ldr r9, [r6] @ get CLKCON (and ensure in TLB)
orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
@@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend)
@@ align next bit of code to cache line
.align 5
s3c2410_do_sleep:
- streq r7, [ r4 ] @ SDRAM sleep command
- streq r8, [ r5 ] @ SDRAM power-down config
- streq r9, [ r6 ] @ CPU sleep
+ streq r7, [r4] @ SDRAM sleep command
+ streq r8, [r5] @ SDRAM power-down config
+ streq r9, [r6] @ CPU sleep
1: beq 1b
mov pc, r14
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S
index c82418e..5adaceb 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S
@@ -57,12 +57,12 @@ s3c2412_sleep_enter1:
* retry, as simply returning causes the system to lock.
*/
- ldrne r9, [ r1 ]
- strne r9, [ r1 ]
- ldrne r9, [ r2 ]
- strne r9, [ r2 ]
- ldrne r9, [ r3 ]
- strne r9, [ r3 ]
+ ldrne r9, [r1]
+ strne r9, [r1]
+ ldrne r9, [r2]
+ strne r9, [r2]
+ ldrne r9, [r3]
+ strne r9, [r3]
bne s3c2412_sleep_enter1
mov pc, r14
diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
index 207e275..f3a9cff 100644
--- a/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -14,12 +14,12 @@
/* The S5PV210/S5PC110 implementations are as belows. */
.macro fifo_level_s5pv210 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S5PV210_UFSTAT_TXMASK
.endm
.macro fifo_full_s5pv210 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S5PV210_UFSTAT_TXFULL
.endm
@@ -27,7 +27,7 @@
* most widely re-used */
.macro fifo_level_s3c2440 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
@@ -36,7 +36,7 @@
#endif
.macro fifo_full_s3c2440 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S3C2440_UFSTAT_TXFULL
.endm
@@ -45,11 +45,11 @@
#endif
.macro senduart,rd,rx
- strb \rd, [\rx, # S3C2410_UTXH ]
+ strb \rd, [\rx, # S3C2410_UTXH]
.endm
.macro busyuart, rd, rx
- ldr \rd, [ \rx, # S3C2410_UFCON ]
+ ldr \rd, [\rx, # S3C2410_UFCON]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
@@ -60,7 +60,7 @@
1001:
@ busy waiting for non fifo
- ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ ldr \rd, [\rx, # S3C2410_UTRSTAT]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
@@ -68,7 +68,7 @@
.endm
.macro waituart,rd,rx
- ldr \rd, [ \rx, # S3C2410_UFCON ]
+ ldr \rd, [\rx, # S3C2410_UFCON]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
@@ -79,7 +79,7 @@
b 1002f
1001:
@ idle waiting for non fifo
- ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ ldr \rd, [\rx, # S3C2410_UTRSTAT]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
--
1.7.10.4
next prev parent reply other threads:[~2013-01-21 17:16 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-21 17:15 [PATCH 00/15] ARM build regressions in v3.8 Arnd Bergmann
2013-01-21 17:15 ` [PATCH 01/15] ARM: compressed/head.S: work around new binutils warning Arnd Bergmann
2013-01-21 17:15 ` [PATCH 02/15] ARM: mvebu: build coherency_ll.S for arch=armv7-a Arnd Bergmann
2013-01-21 19:03 ` Tony Lindgren
2013-01-21 20:16 ` Arnd Bergmann
2013-01-21 17:15 ` Arnd Bergmann [this message]
2013-01-21 17:15 ` [PATCH 04/15] ARM: w90x900: fix legacy assembly syntax Arnd Bergmann
2013-01-21 17:15 ` [PATCH 05/15] ASoC: fsl: fiq and dma cannot both be modules Arnd Bergmann
2013-01-22 3:50 ` Shawn Guo
2013-01-22 6:33 ` Mark Brown
2013-01-22 8:21 ` Arnd Bergmann
2013-02-05 16:21 ` Arnd Bergmann
2013-02-05 16:42 ` [PATCH] ASoC: fsl: fix allyesconfig build for imx-pcm Arnd Bergmann
2013-02-06 4:02 ` Shawn Guo
2013-02-06 8:58 ` Arnd Bergmann
2013-01-21 17:15 ` [PATCH 06/15] clk: export __clk_get_name Arnd Bergmann
2013-01-21 20:51 ` Ulf Hansson
2013-01-22 10:54 ` Fabio Estevam
2013-01-22 15:43 ` Arnd Bergmann
2013-02-14 17:41 ` Arnd Bergmann
2013-01-21 17:16 ` [PATCH 07/15] drm/exynos: don't include plat/gpio-cfg.h Arnd Bergmann
2013-01-21 17:16 ` [PATCH 08/15] drm/exynos: fimd and ipp are broken on multiplatform Arnd Bergmann
2013-01-22 1:26 ` Inki Dae
2013-01-21 17:16 ` [PATCH 09/15] media: coda: don't build " Arnd Bergmann
2013-01-22 3:54 ` Shawn Guo
2013-01-22 12:32 ` Mauro Carvalho Chehab
2013-01-22 12:34 ` Mauro Carvalho Chehab
2013-01-22 8:21 ` Sascha Hauer
2013-01-22 15:41 ` Arnd Bergmann
2013-01-21 17:16 ` [PATCH 10/15] mfd/vexpress: export vexpress_config_func_{put,get} Arnd Bergmann
2013-01-21 17:23 ` Pawel Moll
2013-01-21 17:16 ` [PATCH 11/15] mtd: davinci_nand: fix OF support Arnd Bergmann
2013-01-21 21:37 ` Heiko Schocher
2013-01-21 21:50 ` Arnd Bergmann
2013-01-21 17:16 ` [PATCH 12/15] USB: gadget/freescale: disable non-multiplatform drivers Arnd Bergmann
2013-01-21 18:41 ` Felipe Balbi
2013-01-21 18:57 ` Greg Kroah-Hartman
2013-01-21 19:00 ` Felipe Balbi
2013-01-21 20:15 ` Arnd Bergmann
2013-02-05 16:27 ` Arnd Bergmann
2013-02-05 17:00 ` Greg Kroah-Hartman
2013-02-05 21:37 ` Felipe Balbi
2013-02-05 22:54 ` Arnd Bergmann
2013-02-06 1:55 ` Greg Kroah-Hartman
2013-02-06 7:06 ` Felipe Balbi
2013-01-21 17:16 ` [PATCH 13/15] USB: ehci: make orion and mxc bus glues coexist Arnd Bergmann
2013-01-21 18:42 ` Felipe Balbi
2013-01-21 20:11 ` Alan Stern
2013-01-21 21:37 ` Arnd Bergmann
2013-01-22 6:11 ` Shawn Guo
2013-01-22 6:14 ` Shawn Guo
2013-01-22 15:30 ` Alan Stern
2013-01-21 20:14 ` Arnd Bergmann
2013-01-21 20:35 ` Alan Stern
2013-01-21 21:49 ` Arnd Bergmann
2013-01-22 3:39 ` Alan Stern
2013-01-21 17:16 ` [PATCH 14/15] samples/seccomp: be less stupid about cross compiling Arnd Bergmann
2013-01-22 21:20 ` Kees Cook
2013-01-28 14:26 ` Will Drewry
2013-01-21 17:16 ` [PATCH 15/15] staging/omapdrm: don't build on multiplatform Arnd Bergmann
2013-01-21 17:26 ` Rob Clark
2013-01-21 17:29 ` Rob Clark
2013-01-21 17:41 ` Arnd Bergmann
2013-01-21 18:39 ` Rob Clark
2013-01-21 20:09 ` Arnd Bergmann
2013-01-22 16:53 ` Greg Kroah-Hartman
2013-01-22 16:57 ` Rob Clark
2013-01-22 17:30 ` Greg Kroah-Hartman
2013-01-22 17:47 ` Arnd Bergmann
2013-01-22 18:16 ` Rob Clark
2013-01-22 21:07 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358788568-11137-4-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=arm@kernel.org \
--cc=ben-linux@fluff.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®