From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@free-electrons.com>,
Grant Likely <grant.likely@secretlab.ca>,
Rob Herring <rob.herring@calxeda.com>,
John Stultz <johnstul@us.ibm.com>,
Thomas Gleixner <tglx@linutronix.de>,
Russell King <linux@arm.linux.org.uk>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>, Nicolas Pitre <nico@fluxnic.net>,
Lior Amsalem <alior@marvell.com>,
Maen Suleiman <maen@marvell.com>,
Tawfik Bayouk <tawfik@marvell.com>,
Shadi Ammouri <shadi@marvell.com>,
Eran Ben-Avi <benavi@marvell.com>,
Yehuda Yitschak <yehuday@marvell.com>,
Nadav Haklai <nadavh@marvell.com>,
Ike Pan <ike.pan@canonical.com>,
Jani Monoses <jani.monoses@canonical.com>,
Chris Van Hoof <vanhoof@canonical.com>,
Dan Frazier <dann.frazier@canonical.com>,
Leif Lindholm <leif.lindholm@arm.com>,
Jon Masters <jcm@redhat.com>, David Marlin <dmarlin@redhat.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Subject: [PATCH 2/6] clocksource: time-armada-370-xp: add local timer support
Date: Mon, 21 Jan 2013 18:53:58 +0100 [thread overview]
Message-ID: <1358790842-2986-3-git-send-email-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <1358790842-2986-1-git-send-email-gregory.clement@free-electrons.com>
On the SOCs Armada 370 and Armada XP, each CPU comes with two private
timers. This patch use the timer 0 of each CPU as local timer for the
clockevent if CONFIG_LOCAL_TIMER is selected. In the other case, use
only the private Timer 0 of CPU 0.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
drivers/clocksource/time-armada-370-xp.c | 150 ++++++++++++++++++++++--------
1 file changed, 112 insertions(+), 38 deletions(-)
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index a4605fd..757f034 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -27,8 +27,10 @@
#include <linux/of_address.h>
#include <linux/irq.h>
#include <linux/module.h>
-#include <asm/sched_clock.h>
+#include <asm/sched_clock.h>
+#include <asm/localtimer.h>
+#include <linux/percpu.h>
/*
* Timer block registers.
*/
@@ -49,6 +51,7 @@
#define TIMER1_RELOAD_OFF 0x0018
#define TIMER1_VAL_OFF 0x001c
+#define LCL_TIMER_EVENTS_STATUS 0x0028
/* Global timers are connected to the coherency fabric clock, and the
below divider reduces their incrementing frequency. */
#define TIMER_DIVIDER_SHIFT 5
@@ -57,14 +60,17 @@
/*
* SoC-specific data.
*/
-static void __iomem *timer_base;
-static int timer_irq;
+static void __iomem *timer_base, *local_base;
+static unsigned int timer_clk;
+static bool timer25Mhz = true;
/*
* Number of timer ticks per jiffy.
*/
static u32 ticks_per_jiffy;
+struct clock_event_device __percpu **percpu_armada_370_xp_evt;
+
static u32 notrace armada_370_xp_read_sched_clock(void)
{
return ~readl(timer_base + TIMER0_VAL_OFF);
@@ -78,24 +84,23 @@ armada_370_xp_clkevt_next_event(unsigned long delta,
struct clock_event_device *dev)
{
u32 u;
-
/*
* Clear clockevent timer interrupt.
*/
- writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
/*
* Setup new clockevent timer value.
*/
- writel(delta, timer_base + TIMER1_VAL_OFF);
+ writel(delta, local_base + TIMER0_VAL_OFF);
/*
* Enable the timer.
*/
- u = readl(timer_base + TIMER_CTRL_OFF);
- u = ((u & ~TIMER1_RELOAD_EN) | TIMER1_EN |
- TIMER1_DIV(TIMER_DIVIDER_SHIFT));
- writel(u, timer_base + TIMER_CTRL_OFF);
+ u = readl(local_base + TIMER_CTRL_OFF);
+ u = ((u & ~TIMER0_RELOAD_EN) | TIMER0_EN |
+ TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ writel(u, local_base + TIMER_CTRL_OFF);
return 0;
}
@@ -107,37 +112,38 @@ armada_370_xp_clkevt_mode(enum clock_event_mode mode,
u32 u;
if (mode == CLOCK_EVT_MODE_PERIODIC) {
+
/*
* Setup timer to fire at 1/HZ intervals.
*/
- writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
- writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+ writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF);
+ writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF);
/*
* Enable timer.
*/
- u = readl(timer_base + TIMER_CTRL_OFF);
- writel((u | TIMER1_EN | TIMER1_RELOAD_EN |
- TIMER1_DIV(TIMER_DIVIDER_SHIFT)),
- timer_base + TIMER_CTRL_OFF);
+ u = readl(local_base + TIMER_CTRL_OFF);
+
+ writel((u | TIMER0_EN | TIMER0_RELOAD_EN |
+ TIMER0_DIV(TIMER_DIVIDER_SHIFT)),
+ local_base + TIMER_CTRL_OFF);
} else {
/*
* Disable timer.
*/
- u = readl(timer_base + TIMER_CTRL_OFF);
- writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+ u = readl(local_base + TIMER_CTRL_OFF);
+ writel(u & ~TIMER0_EN, local_base + TIMER_CTRL_OFF);
/*
* ACK pending timer interrupt.
*/
- writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
-
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
}
}
static struct clock_event_device armada_370_xp_clkevt = {
- .name = "armada_370_xp_tick",
+ .name = "armada_370_xp_per_cpu_tick",
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.shift = 32,
.rating = 300,
@@ -150,32 +156,78 @@ static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id)
/*
* ACK timer interrupt and call event handler.
*/
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
- writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
- armada_370_xp_clkevt.event_handler(&armada_370_xp_clkevt);
+ writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
-static struct irqaction armada_370_xp_timer_irq = {
- .name = "armada_370_xp_tick",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = armada_370_xp_timer_interrupt
+/*
+ * Setup the local clock events for a CPU.
+ */
+static int __cpuinit armada_370_xp_timer_setup(struct clock_event_device *evt)
+{
+ u32 u;
+ int cpu = smp_processor_id();
+
+ /* Use existing clock_event for cpu 0 */
+ if (!smp_processor_id())
+ return 0;
+
+ u = readl(local_base + TIMER_CTRL_OFF);
+ if (timer25Mhz)
+ writel(u | TIMER0_25MHZ, local_base + TIMER_CTRL_OFF);
+ else
+ writel(u & ~TIMER0_25MHZ, local_base + TIMER_CTRL_OFF);
+
+ evt->name = armada_370_xp_clkevt.name;
+ evt->irq = armada_370_xp_clkevt.irq;
+ evt->features = armada_370_xp_clkevt.features;
+ evt->shift = armada_370_xp_clkevt.shift;
+ evt->rating = armada_370_xp_clkevt.rating,
+ evt->set_next_event = armada_370_xp_clkevt_next_event,
+ evt->set_mode = armada_370_xp_clkevt_mode,
+ evt->cpumask = cpumask_of(cpu);
+
+ *__this_cpu_ptr(percpu_armada_370_xp_evt) = evt;
+
+ clockevents_config_and_register(evt, timer_clk, 1, 0xfffffffe);
+ enable_percpu_irq(evt->irq, 0);
+
+ return 0;
+}
+
+static void armada_370_xp_timer_stop(struct clock_event_device *evt)
+{
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
+}
+
+static struct local_timer_ops armada_370_xp_local_timer_ops __cpuinitdata = {
+ .setup = armada_370_xp_timer_setup,
+ .stop = armada_370_xp_timer_stop,
};
void __init armada_370_xp_timer_init(void)
{
u32 u;
struct device_node *np;
- unsigned int timer_clk;
+ int res;
+
np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
timer_base = of_iomap(np, 0);
WARN_ON(!timer_base);
+ local_base = of_iomap(np, 1);
if (of_find_property(np, "marvell,timer-25Mhz", NULL)) {
/* The fixed 25MHz timer is available so let's use it */
+ u = readl(local_base + TIMER_CTRL_OFF);
+ writel(u | TIMER0_25MHZ,
+ local_base + TIMER_CTRL_OFF);
u = readl(timer_base + TIMER_CTRL_OFF);
- writel(u | TIMER0_25MHZ | TIMER1_25MHZ,
+ writel(u | TIMER0_25MHZ,
timer_base + TIMER_CTRL_OFF);
timer_clk = 25000000;
} else {
@@ -183,15 +235,23 @@ void __init armada_370_xp_timer_init(void)
struct clk *clk = of_clk_get(np, 0);
WARN_ON(IS_ERR(clk));
rate = clk_get_rate(clk);
+ u = readl(local_base + TIMER_CTRL_OFF);
+ writel(u & ~(TIMER0_25MHZ),
+ local_base + TIMER_CTRL_OFF);
+
u = readl(timer_base + TIMER_CTRL_OFF);
- writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
+ writel(u & ~(TIMER0_25MHZ),
timer_base + TIMER_CTRL_OFF);
+
timer_clk = rate / TIMER_DIVIDER;
+ timer25Mhz = false;
}
- /* We use timer 0 as clocksource, and timer 1 for
- clockevents */
- timer_irq = irq_of_parse_and_map(np, 1);
+ /*
+ * We use timer 0 as clocksource, and private(local) timer 0
+ * for clockevents
+ */
+ armada_370_xp_clkevt.irq = irq_of_parse_and_map(np, 4);
ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
@@ -216,12 +276,26 @@ void __init armada_370_xp_timer_init(void)
"armada_370_xp_clocksource",
timer_clk, 300, 32, clocksource_mmio_readl_down);
- /*
- * Setup clockevent timer (interrupt-driven).
- */
- setup_irq(timer_irq, &armada_370_xp_timer_irq);
+ /* Register the clockevent on the private timer of CPU 0 */
armada_370_xp_clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&armada_370_xp_clkevt,
timer_clk, 1, 0xfffffffe);
-}
+ percpu_armada_370_xp_evt = alloc_percpu(struct clock_event_device *);
+
+
+ /*
+ * Setup clockevent timer (interrupt-driven).
+ */
+ *__this_cpu_ptr(percpu_armada_370_xp_evt) = &armada_370_xp_clkevt;
+ res = request_percpu_irq(armada_370_xp_clkevt.irq,
+ armada_370_xp_timer_interrupt,
+ armada_370_xp_clkevt.name,
+ percpu_armada_370_xp_evt);
+ if (!res) {
+ enable_percpu_irq(armada_370_xp_clkevt.irq, 0);
+#ifdef CONFIG_LOCAL_TIMERS
+ local_timer_register(&armada_370_xp_local_timer_ops);
+#endif
+ }
+}
--
1.7.9.5
next prev parent reply other threads:[~2013-01-21 17:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-21 17:53 [PATCH 0/6] arm: mvebu: add support for local timer for Armada 370/XP Gregory CLEMENT
2013-01-21 17:53 ` [PATCH 1/6] arm: mvebu: Add support for local interrupt Gregory CLEMENT
2013-01-21 17:53 ` Gregory CLEMENT [this message]
2013-01-21 17:53 ` [PATCH 3/6] arm: kconfig: don't select TWD with local timer for Armada 370/XP Gregory CLEMENT
2013-01-21 17:54 ` [PATCH 4/6] arm: mvebu: update defconfig with local timer support Gregory CLEMENT
2013-01-21 17:54 ` [PATCH 5/6] arm: mvebu: update DT to support local timers Gregory CLEMENT
2013-01-21 17:54 ` [PATCH 6/6] clocksource: update and move armada-370-xp-timer documentation to timer directory Gregory CLEMENT
[not found] ` <201301211831.45947.arnd@arndb.de>
[not found] ` <CAKGA1b=9WQNwHOz=k13XVc=MyZT1UrcaYj8muF2A5B4eJA5+MA@mail.gmail.com>
[not found] ` <201301212044.41865.arnd@arndb.de>
2013-01-22 20:46 ` [PATCH 3/6] arm: kconfig: don't select TWD with local timer for Armada 370/XP Rob Herring
2013-01-22 21:19 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358790842-2986-3-git-send-email-gregory.clement@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=benavi@marvell.com \
--cc=dann.frazier@canonical.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dmarlin@redhat.com \
--cc=grant.likely@secretlab.ca \
--cc=ike.pan@canonical.com \
--cc=jani.monoses@canonical.com \
--cc=jason@lakedaemon.net \
--cc=jcm@redhat.com \
--cc=johnstul@us.ibm.com \
--cc=leif.lindholm@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=maen@marvell.com \
--cc=nadavh@marvell.com \
--cc=nico@fluxnic.net \
--cc=olof@lixom.net \
--cc=rob.herring@calxeda.com \
--cc=sebastian.hesselbarth@gmail.com \
--cc=shadi@marvell.com \
--cc=tawfik@marvell.com \
--cc=tglx@linutronix.de \
--cc=thomas.petazzoni@free-electrons.com \
--cc=vanhoof@canonical.com \
--cc=yehuday@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®