[PATCH 1/5] extcon: arizona: Disable debouce for accessory removal detection

[Mark Brown <broonie@opensource.wolfsonmicro.com>]

Ensure we clamp as quickly as possible after removal by disabling the
debounce while there is an accessory present.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/extcon/extcon-arizona.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index de141f7..ce95f86 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -773,6 +773,10 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 		} else {
 			arizona_start_hpdet_acc_id(info);
 		}
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_JACK_DETECT_DEBOUNCE,
+				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0);
 	} else {
 		dev_dbg(arizona->dev, "Detected jack removal\n");
 
@@ -792,6 +796,11 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 		if (ret != 0)
 			dev_err(arizona->dev, "Removal report failed: %d\n",
 				ret);
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_JACK_DETECT_DEBOUNCE,
+				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB,
+				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
 	}
 
 	mutex_unlock(&info->lock);
-- 
1.7.10.4