mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: <linux-arch@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <arnd@arndb.de>, Vineet Gupta <Vineet.Gupta1@synopsys.com>
Subject: [PATCH v3 66/71] ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional
Date: Thu, 24 Jan 2013 16:36:26 +0530	[thread overview]
Message-ID: <1359025589-22277-43-git-send-email-vgupta@synopsys.com> (raw)
In-Reply-To: <1359025589-22277-1-git-send-email-vgupta@synopsys.com>

All the current platforms can work with 0x8000_0000 based dma_addr_t
since the Bus Bridges typically ignore the top bit (the only excpetion
was Angel4 PCI-AHM bridge which we no longer care for).
That way we don't need plat-specific cpu-addr to bus-addr conversion.

Hooks still provided - just in case a platform has an obscure device
which say needs 0 based bus address.

That way <asm/dma_mapping.h> no longer needs to unconditinally include
<plat/dma_addr.h>

Also verfied that on Angel4 board, other peripherals (IDE-disk / EMAC)
work fine with 0x8000_0000 based dma addresses.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arc/Kconfig                              |    4 ++
 arch/arc/include/asm/dma-mapping.h            |   16 +++++++++
 arch/arc/plat-arcfpga/include/plat/dma_addr.h |   45 -------------------------
 3 files changed, 20 insertions(+), 45 deletions(-)
 delete mode 100644 arch/arc/plat-arcfpga/include/plat/dma_addr.h

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index ac17368..be85ceb 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -119,6 +119,10 @@ config CPU_BIG_ENDIAN
 	help
 	  Build kernel for Big Endian Mode of ARC CPU
 
+# If a platform can't work with 0x8000_0000 based dma_addr_t
+config ARC_PLAT_NEEDS_CPU_TO_DMA
+	bool
+
 config SMP
 	bool "Symmetric Multi-Processing (Incomplete)"
 	default n
diff --git a/arch/arc/include/asm/dma-mapping.h b/arch/arc/include/asm/dma-mapping.h
index 7fd150e..31f77ae 100644
--- a/arch/arc/include/asm/dma-mapping.h
+++ b/arch/arc/include/asm/dma-mapping.h
@@ -13,7 +13,23 @@
 
 #include <asm-generic/dma-coherent.h>
 #include <asm/cacheflush.h>
+
+#ifndef CONFIG_ARC_PLAT_NEEDS_CPU_TO_DMA
+/*
+ * dma_map_* API take cpu addresses, which is kernel logical address in the
+ * untranslated address space (0x8000_0000) based. The dma address (bus addr)
+ * ideally needs to be 0x0000_0000 based hence these glue routines.
+ * However given that intermediate bus bridges can ignore the high bit, we can
+ * do with these routines being no-ops.
+ * If a platform/device comes up which sriclty requires 0 based bus addr
+ * (e.g. AHB-PCI bridge on Angel4 board), then it can provide it's own versions
+ */
+#define plat_dma_addr_to_kernel(dev, addr) ((unsigned long)(addr))
+#define plat_kernel_addr_to_dma(dev, ptr) ((dma_addr_t)(ptr))
+
+#else
 #include <plat/dma_addr.h>
+#endif
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,
 			    dma_addr_t *dma_handle, gfp_t gfp);
diff --git a/arch/arc/plat-arcfpga/include/plat/dma_addr.h b/arch/arc/plat-arcfpga/include/plat/dma_addr.h
deleted file mode 100644
index 0e96343..0000000
--- a/arch/arc/plat-arcfpga/include/plat/dma_addr.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * vineetg: Feb 2009
- *  -For AA4 board, kernel to DMA address APIs
- */
-
-/*
- * kernel addresses are 0x800_000 based, while Bus addr are 0 based
- */
-
-#ifndef __PLAT_DMA_ADDR_H
-#define __PLAT_DMA_ADDR_H
-
-#include <linux/device.h>
-
-static inline unsigned long plat_dma_addr_to_kernel(struct device *dev,
-						    dma_addr_t dma_addr)
-{
-	return dma_addr + PAGE_OFFSET;
-}
-
-static inline dma_addr_t plat_kernel_addr_to_dma(struct device *dev, void *ptr)
-{
-	unsigned long addr = (unsigned long)ptr;
-	/*
-	 * To Catch buggy drivers which can call DMA map API with kernel vaddr
-	 * i.e. for buffers alloc via vmalloc or ioremap which are not
-	 * gaurnateed to be PHY contiguous and hence unfit for DMA anyways.
-	 * On ARC kernel virtual address is 0x7000_0000 to 0x7FFF_FFFF, so
-	 * ideally we want to check this range here, but our implementation is
-	 * better as it checks for even worse user virtual address as well.
-	 */
-	if (likely(addr >= PAGE_OFFSET))
-		return addr - PAGE_OFFSET;
-
-	BUG();
-	return addr;
-}
-
-#endif
-- 
1.7.4.1


  parent reply	other threads:[~2013-01-24 11:13 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-24 11:05 [PATCH v3 00/71] Synopsys ARC Linux kernel Port (Part #2) Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 03/71] ARC: irqflags - Interrupt enabling/disabling at in-core intc Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 04/71] ARC: Atomic/bitops/cmpxchg/barriers Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 05/71] asm-generic headers: uaccess.h to conditionally define segment_eq() Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 07/71] asm-generic: uaccess: Allow arches to over-ride __{get,put}_user_fn() Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 08/71] ARC: [optim] uaccess __{get,put}_user() optimised Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 09/71] asm-generic headers: Allow yet more arch overrides in checksum.h Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 10/71] ARC: Checksum/byteorder/swab routines Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 12/71] ARC: Spinlock/rwlock/mutex primitives Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 13/71] ARC: String library Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 14/71] ARC: Low level IRQ/Trap/Exception Handling Vineet Gupta
2013-01-28  7:44   ` Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 15/71] ARC: Interrupt Handling Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 16/71] ARC: Non-MMU Exception Handling Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 24/71] ARC: Page Table Management Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 25/71] ARC: MMU Context Management Vineet Gupta
2013-01-24 11:05 ` [PATCH v3 26/71] ARC: MMU Exception Handling Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 27/71] ARC: TLB flush Handling Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 28/71] ARC: Page Fault handling Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 31/71] ARC: [plat-arcfpga] Static platform device for CONFIG_SERIAL_ARC Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 35/71] ARC: Last bits (stubs) to get to a running kernel with UART Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 36/71] ARC: [plat-arcfpga] defconfig Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 37/71] ARC: [optim] Cache "current" in Register r25 Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 38/71] ARC: ptrace support Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 39/71] ARC: Futex support Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 40/71] ARC: OProfile support Vineet Gupta
2013-01-29 17:05   ` James Hogan
2013-01-30  6:34     ` Vineet Gupta
2013-01-30 10:54       ` James Hogan
2013-01-30 11:46         ` Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 41/71] ARC: Support for high priority interrupts in the in-core intc Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 43/71] ARC: Diagnostics: show_regs() etc Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 46/71] ARC: stacktracing APIs based on dw2 unwinder Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 47/71] ARC: disassembly (needed by kprobes/kgdb/unaligned-access-emul) Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 49/71] sysctl: Enable PARISC "unaligned-trap" to be used cross-arch Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 50/71] ARC: Unaligned access emulation Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 51/71] ARC: kgdb support Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 52/71] ARC: Boot #2: Verbose Boot reporting / feature verification Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 53/71] ARC: [plat-arfpga] BVCI Latency Unit setup Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 54/71] perf, ARC: Enable building perf tools for ARC Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 55/71] ARC: perf support (software counters only) Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 56/71] ARC: Support for single cycle Close Coupled Mem (CCM) Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 60/71] ARC: [Review] Multi-platform image #1: Kconfig enablement Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 61/71] ARC: Fold boards sub-menu into platform/SoC menu Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 63/71] ARC: [Review] Multi-platform image #3: switch to board callback Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 64/71] ARC: [Review] Multi-platform image #4: Isolate platform headers Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 65/71] ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core Vineet Gupta
2013-01-24 11:06 ` Vineet Gupta [this message]
2013-01-24 11:06 ` [PATCH v3 67/71] ARC: [Review] Multi-platform image #7: SMP common code to use callbacks Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 68/71] ARC: [Review] Multi-platform image #8: platform registers SMP callbacks Vineet Gupta
2013-01-24 11:06 ` [PATCH v3 71/71] ARC: Add self to MAINTAINERS Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359025589-22277-43-git-send-email-vgupta@synopsys.com \
    --to=vineet.gupta1@synopsys.com \
    --cc=arnd@arndb.de \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®