From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756515Ab3AYDS4 (ORCPT ); Thu, 24 Jan 2013 22:18:56 -0500 Received: from bear.ext.ti.com ([192.94.94.41]:48585 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753584Ab3AYDSu (ORCPT ); Thu, 24 Jan 2013 22:18:50 -0500 From: Kishon Vijay Abraham I To: , , , , , , , , , Subject: [PATCH 1/6] ARM: dts: omap5: Add omap control usb data Date: Fri, 25 Jan 2013 08:48:30 +0530 Message-ID: <1359083915-8690-2-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1359083915-8690-1-git-send-email-kishon@ti.com> References: <1359083915-8690-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add omap control usb data in omap5 device tree file. This will have the register address of registers to power on the USB2 PHY and USB3 PHY. The information for the node added here is available in Documentation/devicetree/bindings/usb/omap-usb.txt Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/omap5.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7a78d1b..edc7464 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -504,5 +504,13 @@ hw-caps-ll-interface; hw-caps-temp-alert; }; + + omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,omap-control-usb"; + reg = <0x4a002300 0x4>, + <0x4a002370 0x4>; + reg-names = "control_dev_conf", "phy_power_usb"; + ti,type = <2>; + }; }; }; -- 1.7.9.5