[PATCH 2/2] ARM: dts: cfa10049: Change the SPI3 bus to spi-gpio

[Maxime Ripard <maxime.ripard@free-electrons.com>]

The DAC found on the last chip select requires a word length of 12 bits,
which is not supported by the SSP controller of the iMX28. Use
bitbanging for that bus to support such a length.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/imx28-cfa10049.dts |   78 ++++++++++++++++++----------------
 1 file changed, 42 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 7890acc..dd91244 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -52,48 +52,17 @@
 				spi3_pins_cfa10049: spi3-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
-						0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
-						0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
-						0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
-						0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */
+						0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
+						0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
+						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
+						0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
+						0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <1>;
 				};
 			};
-
-			ssp3: ssp@80016000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi3_pins_cfa10049>;
-				status = "okay";
-
-				gpio5: gpio5@0 {
-					compatible = "fairchild,74hc595";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0>;
-					registers-number = <2>;
-					spi-max-frequency = <100000>;
-				};
-
-				gpio6: gpio6@1 {
-					compatible = "fairchild,74hc595";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <1>;
-					registers-number = <4>;
-					spi-max-frequency = <100000>;
-				};
-
-				dac0: dh2228@2 {
-					compatible = "rohm,dh2228fv";
-					reg = <2>;
-					spi-max-frequency = <100000>;
-				};
-			};
 		};
 
 		apbx@80040000 {
@@ -177,4 +146,41 @@
 			status = "okay";
 		};
 	};
+
+	spi3 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_pins_cfa10049>;
+		status = "okay";
+		gpio-sck = <&gpio0 24 0>;
+		gpio-mosi = <&gpio0 28 0>;
+		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
+		num-chipselects = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio5: gpio5@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <2>;
+			spi-max-frequency = <100000>;
+		};
+
+		gpio6: gpio6@1 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <1>;
+			registers-number = <4>;
+			spi-max-frequency = <100000>;
+		};
+
+		dac0: dh2228@2 {
+			compatible = "rohm,dh2228fv";
+			reg = <2>;
+			spi-max-frequency = <100000>;
+		};
+	};
 };
-- 
1.7.10.4