[PATCH] USB: musb: Correct Kconfig in order to avoid non compilable selection

[Peter Ujfalusi <peter.ujfalusi@ti.com>]

Currently it is possible to have:
USB_MUSB_OMAP2PLUS=m
TWL4030_USB=y

which would result compile time error due to missing symbols.

With this change USB_MUSB_OMAP2PLUS and TWL4030_USB will be in sync.

Reported-by: Vincent Stehle <v-stehle@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi Felipe,

I have also noticed that we have similar issue around USB_MUSB_HDRC,
CONFIG_USB_MUSB_TUSB6010 and CONFIG_USB_TUSB_OMAP_DMA. You can easily have a
combination of y/m of these to have non compilable kernel.
I have tried to fix it but my Kconfig skills are not adequate for it ;)

Regards,
Peter

 drivers/usb/musb/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 23a0b7f..a3fa19c 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -9,8 +9,6 @@ config USB_MUSB_HDRC
 	depends on USB && USB_GADGET
 	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
 	select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
-	select TWL4030_USB if MACH_OMAP_3430SDP
-	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
 	help
 	  Say Y here if your system has a dual role high speed USB
@@ -49,6 +47,8 @@ config USB_MUSB_TUSB6010
 config USB_MUSB_OMAP2PLUS
 	tristate "OMAP2430 and onwards"
 	depends on ARCH_OMAP2PLUS
+	select TWL4030_USB if MACH_OMAP_3430SDP
+	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 
 config USB_MUSB_AM35X
 	tristate "AM35x"
-- 
1.8.1.1